September 29, 2020 NHTSA CAMPAIGN NUMBER: 20V594000
If the front jacks fail, an unexpected drop can occur, increasing the risk of an injury.
NHTSA Campaign Number: 20V594
Manufacturer Newmar
Corporation
Components EQUIPMENT
Potential Number of Units Affected 48
Summary
Newmar Corporation (Newmar) is recalling certain 2021 Essex, Dutch Star, Mountain Aire, and London Aire motorhomes. The front leveling jacks may not be fastened correctly to the chassis, possibly causing the jacks to fail to support the weight of the motorhome.
Remedy
Newmar will notify owners, and dealers will inspect and repair the leveling jacks as necessary, free of charge. The recall began November 9, 2020. Owners may contact Newmar customer service at 1-800-731-8300.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Date: November 3, 2020
Re: Newmar Corporation – Motor Vehicle Recall Notification
Subject: Recall Campaign No.: 20V 594
This notice is sent to you as a Newmar Dealer in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Newmar Corporation has decided that a defect, which relates to motor vehicle safety, exists in specific Newmar recreational vehicles.
The National Traffic and Motor Vehicle Safety Act requires that each vehicle, which is subject to a recall campaign of this type, must be satisfactorily repaired within a reasonable time after the owner has tendered it for repair. A failure to adequately repair within 60 days after tender of a vehicle is prima facie evidence of failure to repair within a reasonable time. To avoid providing these problematic solutions, every effort must be made to promptly schedule an appointment with each owner and to repair their vehicle as soon as possible. Vehicle owners are being notified of this recall. If the condition is not remedied within a reasonable time, they are instructed on how to contact the National Highway Traffic Safety Administration.
REASON FOR THIS RECALL
Newmar Corporation has decided that a defect, which relates to motor vehicle safety, exists in specific motorhomes.
On certain motorhomes, the front leveling jacks may not support the weight of the motorhome due to not being fastened correctly to the chassis. Not having the front jacks fastened correctly may result in an unexpected drop causing injury. Correction: Newmar Dealers will inspect and repair leveling jacks as necessary.
The motorhomes require immediate service. Continued use poses a potential safety hazard.
DEALER CAMPAIGN RESPONSIBILITY
Dealers are to provide to all customers/owner vehicles the service of completing this campaign at no charge to the customer/owner regardless of vehicle age, vehicle mileage, or ownership at the time of repair.
REPAIR PROCEDURE
Newmar will provide the work instructions.
If you should have any questions please contact your service account manager direct or the Newmar service department at: 1-866-290-5371.
Thank you for your cooperation.
Sincerely,
Newmar Corporation
NEWMAR CORPORATION · 355 N DELAWARE ST · NAPPANEE, IN 46550-0030
Newmar Service Department 1-866-290-5371 · WWW.NEWMARCORP.COM
4 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| NEWMAR | DUTCH STAR | 2021 |
| NEWMAR | ESSEX | 2021 |
| NEWMAR | LONDON AIRE | 2021 |
| NEWMAR | MOUNTAIN AIRE | 2021 |
7 Associated Documents
Recall Quarterly Report #3, 2021-2
RCLQRT-20V594-9515.PDF 211.292KB
Recall Acknowledgement
RCAK-20V594-9670.pdf 245.077KB
Defect Notice 573 Report
RCLRPT-20V594-5841.PDF 214.399KB
Recall Quarterly Report #2, 2021-1
RCLQRT-20V594-6457.PDF 211.21KB
Manufacturer Notices(to Dealers,etc)
RCMN-20V594-1877.pdf 233.797KB
Recall Quarterly Report #1, 2020-4
RCLQRT-20V594-3067.PDF 211.11KB
Recall Quarterly Report #4, 2021-3
RCLQRT-20V594-5271.PDF 211.393KB
Latest Recalls Documents
- 【True Heavy-Duty 9,000 lbs Capacity】 Made from thick 11-gauge steel for maximum strength heavy-duty steel with electrophoresis coating for long-lasting durability. One of the strongest RV stabilizer jacks on the market, built to last and safely handle heavy trailers.
- 【Complete 4-Pack with Power-Drill Ready Socket】 Includes 4 steel jacks and a 3/4" hex magnetic socket for fast power-drill operation. Set up your RV quickly and effortlessly.
- 【All Installation Hardware Included】 Comes with 16 pcs 3/8" mounting screws, matching 9/16" socket, 11/36" drill bit, and a drilling guide sticker — everything you need for fast and precise installation.
- 【Adjustable Height for Versatile Fit】 Extended height: 24", retracted height: 5", retracted length: 26", width: 7.5". Designed to stabilize and level a wide range of RVs, campers
, and trailers. - 【Safe & Easy Operation】 For stabilizing and leveling only. Never use for lifting, changing tires, or supporting vehicle weight. Smooth scissor mechanism ensures effortless raising and lowering, even for first-time users.
- What will You Get: 4-Pack RV Stack Jacks with rubber pads, which is ideal for stabilizing and leveling your RV. They provide a reliable stabilization solution for your RV, trailer, camper, etc.
- Make Your RV Stable: These RV stabilizer jacks are made of durable cast aluminum, anti-rust & corrosion resistant, with a square base design, each can support up to 6000lbs, with which you needn’t worry about your RV moving or bouncing anymore.
- Height Adjustable: The height of the RV stabilizing jack can extend from 11" to 17", they may not rise very high, thus are recommended to use for lower to-the-ground rigs for sure. Please Note: These jacks are only for stabilization usage. Do Not Use To Raise.
- Easy to Use: Simply position each stack jack stand underneath your RV and spin the “T” shape handle to raise it to the proper height to reach appropriate leveling and stabilization. Recommend placing wood or concrete blocks under jacks for better use.
- Lightweight & Portable: These RV jack stands weigh less than 40 lbs in total; besides, when not in use, they can be compacted and nested together for easy storage.
- 【Heavy Duty Steel】: Made of heavy-duty steel with electrophoresis on the surface so that it is durable and strong enough to stabilize and level most RVs
- 【Specification】: Designed with plenty of room for you to stretch the RV scissor jack in 24” maximum height, 4” retracted height, 26" retracted length, and 7.3" width
- 【2 Way to Use】: The crank handle turns easily to help raise/ lower the camper scissor jack quickly, power drill (NOT INCLUDED) is more faster. And jack with the smooth tooth gear design of arms to its' ensures straight line vertical extension and retraction for your RVs
- 【Application】: 24" RV stabilizing scissor jack 7500lbs with wide bow-tie base to help you keep trailer, RVs, trailers, campers motorhomes, pop-ups level and stable
- 【What You Will Get】: 2 * stabilizer jacks, 1 * Crank handle, 1 * Drill Bit. TIPS: It can be used with the Kohree RV stabilizer Jack Pad
- Heavy Duty Support: Our Basement Floor Jack is built from tough Q235 steel. Each jack handles up to 11023 lbs with ease. M22 safety locking screws and pins for added strength and safety
- Upgraded Design for Top Swivel: When you turn the screw to extend the jack, the swiveling top plate ensures flexible alignment, making it highly adaptable for tight or uneven spaces
- Adjustable Height Design: Range of adjustment: 11" - 16". This adjustable support jack features an adjustable height design. It can be adjusted to the right height with very little effort by turning the swivel rod
- Simple Operation: First step, place the support bar vertically on a flat surface. Second step, turn the adjusting lever clockwise to adjust the right height, then tighten the M22 nut with a wrench
- Wide Application: Our Adjustable Support Beam Basement Jack Post can provide temporary or additional support during construction and maintenance. Ideal for temporary support in various places like beams, patios, and construction
- 【Function】House floor Jacks provides temporary or additional support for leveling and stabilizing floor beams and joists during construction and repairs. Jack post can be used for areas such as stairs, porches, roof beams, decks, crawl spaces and heavy load areas.
- 【Specifications】Range of adjustment: 11 3/5" - 16 1/10"; minimum and maximum height capacity: 13200 lbs / 6 ton in total; base plate dimension: 5" x 5" x 0.19"; base plate hole diameter: 0.5"; top plate dimension: 3" x 3" x 0.19".
- 【Installation】Simply keep the base plate stationary and swivel the top plate to required height, and then tighten the positioning nut with a wrench in order to secure the top plate, even one person can install and use in seconds.
- 【High Quality】This adjustable support jack is made of heavy duty steel with zinc plated surface to ensure anti-corrosion and durability.
- 【Warranty】One-year warranty. If you have any questions, please contact us via Amazon Message directly, our professional customer service would help in 24H.
Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.