22-1189 – Safety Chains Could Break – 2021 Forest River Wildcat Travel Trailers

February 8, 2021 NHTSA CAMPAIGN NUMBER: 21V059000

Safety Chains Could Break

Safety chain breakage could cause the trailer to detach from the tow vehicle, increasing the risk of a crash

 

NHTSA Campaign Number: 21V059

Manufacturer Forest RivereBay logo, Inc.

Components EQUIPMENT

Potential Number of Units Affected 53

 

Summary

Forest RivereBay logo, Inc. (Forest RivereBay logo) is recalling certain 2021 Wildcat Travel Trailer models WCT247RXX-OR and WCT276FKX-OR. The safety chains do not meet the Gross Vehicle Weight Rating (GVWR) and could potentially break.

 

Remedy

Forest RivereBay logo will notify owners, and dealers will replace the safety chains with correctly rated safety chains, free of charge. The recall began February 22, 2021. Owners may contact Forest RivereBay logo customer service at 1-503-831-5410.

Forest RivereBay logo’s number for this recall is 22-1189.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


FOREST RIVEReBay logo RECALL 21V-059
SAFETY CHAIN REPLACEMENT

 

Preparation

THIS REPLACEMENT SHOULD ONLY BE COMPLETED BY AN AUTHORIZED SERVICE TECHNICIAN.

 

WARNING

Remove all flammable material from the area to be welded. Any remaining flammable material that cannot be removed must be protected. Proper fire protection and control measures should be kept on hand.

 

WARNING

Lift travel trailer by the frame and never the axle or suspension. Do not go under the travel trailer unless it is properly supported by jack stands. Unsupported travel trailers can fall and may result in death, serious injury or property damage.

 

Note: In this document, dashed red lines indicate using a die grinder to remove components and solid red lines indicate using a welder to add components per instructions and image references.

 

Tools Required

 

Hardware Required

Note: Refer to the cover page of these remedy instructions for specific part numbers.

 

Procedure

1. Use the die grinder with the cutting wheel attachment to remove the existing chain elbow from the underside of the A-frame coupler (Fig. 1).

2. The existing safety chains can be set aside with the chain elbow.

3. Use the die grinder and grinding wheel attachment to grind the cut areas smooth (Fig. 2).

4. Feed the last link of each of the new safety chains onto the new chain elbow (Fig. 3).

5. Center the chain elbow and safety chain assembly under the A-frame coupler so that the ends of the chain elbow are touching the ends of the two A-frame tubes. The elbow should be pointing away from the travel trailer.

 

Note: Ensure that the new safety chains are not pinched between the chain elbow and the coupler. The safety chains MUST be able to move freely.

 

6. Weld each end of the chain elbow to the A-frame tubes completely (Figs. 4 and 5).

7. Test the movement ability of the safety chains to make sure they are able to move freely.

8. Spray paint any visible areas of the repair with black spray paint.

 

As a supplier of components to the RV industry, safety, education and customer satisfaction are our primary concerns. Should you have any questions, please do not hesitate to contact us at (574) 537-8900 or by email at [email protected]. Self-help tips, technical documents, product videos and a training class schedule are available at lci1.com or by downloading the MyLCI app.

 

Rev: 02.08.21
CCD-0004281

 


WHAT IS THE DEFECT/NONCOMPLIANCE?

The safety chains do not meet the Gross Vehicle Weight Rating and could potentially break.

 

EVALUATION OF THE RISK TO THE VEHICLE AND OPERATOR(S) RELATED TO THE RECALL.

If the recreational vehicle trailer becomes detached from the tow-vehicle, the safety chains would not meet the Gross Vehicle Weight Rating and break. This condition could lead to complete detachment or cause property damage, personal injury or a crash

 

WHAT IS FOREST RIVER AND OUR DEALERSHIPS GOING TO DO?

Forest RivereBay logo is notifying dealerships of the recall. You may have the recall corrected at any Forest RivereBay logo dealership. However, it is preferable if you have your selling dealership perform the remedy. Forest RivereBay logo completely covers your cost for the remedy; you will not receive any bill of sale for anything covered under the above recall number.

 

WHAT SHOULD YOU DO?

Please contact your dealer immediately and request a service appointment to schedule the free remedy to replace the safety chains. The vehicle Owner is responsible for arranging to have the work completed. Please state you have been notified by Forest RivereBay logo of having a recall in process for your vehicle and provide the recall number for the dealership. It is also helpful to the dealership to have a copy of this letter when you take your vehicle in for the recall remedy.
You may also visit www.forestriverinc.com for dealer locations.

 

HOW LONG WILL THE REMEDY PROCESS TAKE?

The estimated time of repair is .5 hours. However, the dealership may need to keep your vehicle or schedule an appointment with you for a later date to fit into their regular service schedule.

 

WHAT IF YOU HAVE PREVIOUSLY PAID FOR REPAIRS TO YOUR VEHICLE FOR THIS PARTICULAR CONDITION?

If you have already paid for a repair that is within the scope of this defect under recall, you still need to have this recall inspected and/or performed to ensure the correct parts and procedures were utilized.
Additionally, you may be eligible for a refund of previously paid repairs. Refunds will only be provided for within the scope of this defect under recall.

Please send the service invoice to the following address:

Wildcat
Forest RivereBay logo, Inc.
Attn: WARRANTY MANAGER
1429 SouthEast Glow
Dallas, OR 97338

 

 



1 Affected Product

Vehicle

MAKEMODELYEAR
FOREST RIVEReBay logoWILDCAT2021

 


10 Associated Documents

Recall Quarterly Report #2, 2021-2

RCLQRT-21V059-7226.PDF 211.22KB

 


Remedy Instructions and TSB

RCRIT-21V059-4350.pdf 612.455KB

 


ISSUED Owner Notification Letter(Part 577)

RCONL-21V059-6313.pdf 210.437KB

 


Manufacturer Notices(to Dealers,etc)

RCMN-21V059-7415.pdf 219.564KB

 


Defect Notice 573 Report

RCLRPT-21V059-3292.PDF 213.923KB

 


Recall Acknowledgement

RCAK-21V059-5977.pdf 645.766KB

 


Recall 573 Report – Amendment 1

RCLRPT-21V059-3732.PDF 214KB

 


Recall Quarterly Report #1, 2021-1

RCLQRT-21V059-6688.PDF 211.12KB

 


Recall Quarterly Report #3, 2021-3

RCLQRT-21V059-7060.PDF 211.304KB

 


Recall Quarterly Report #4, 2021-4

RCLQRT-21V059-2095.PDF 211.414KB

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V059&docType=RCL

 


 

SaleBestseller No. 1
YATOINTO 2-Pack Grade 80 Trailer Safety Chain 35 Inch with 5/16'' Clevis Snap Hook and Chain Retainer | 21,000 lbs Break Strength | Transport Chain for Towing
  • [ UPGRADE EQUIPMENT G80 ] -- Heavy duty grade 80 transport chain is made using high-strength, heat-treated alloy.G80 chains provide a higher safe working load than lower grade chains, but weigh the same.
  • [ PROFESSIONAL DESIGN ] -- Designed for connecting from your trailer to your vehicle to help resist complete vehicle-trailer separation during a disconnect. When connecting safety chains for towing, two chains should be used.
  • [ HEAVY DUTY CONSTRUCTION ] -- The high quality, standard link 5/16" size chain is heat-treated, and strength tested for superior quality. The chain retainer has a removable zinc-plated pin and cotter for easy chain installation and replacement.
  • [ RELIABLE TRANSPORTATION ] -- This trailer safety chain has a grade-80 rating, providing exceptional tensile strength and resisting abrasions and wear from heavy cargo. Yellow zinc chromate finishes for corrosion protection and makes it easy for DOT officials to recognize.
  • [ SAFE & COMPLIANT ] -- All our grade 80 chains and clevis snap hook is embossed with the proper markings to meet NACM standards. You will be compliant with any roadside inspection. Please feel free to us if you have any problems. (Each safety chain must meet or exceed the gross trailer weight!!!)
Bestseller No. 2
Tnyeobae Heavy Duty 3/16" x 48" Black Trailer Safety Chain with 3/8" S-Hooks, Grade 30 Steel, 3,200 lbs Load, Rust Resistant Tow Chain for RV, Boat, Trailer, with Chain Hanger Bracket
  • Heavy Duty Towing Safety:3/16" x 48" trailer safety chain with 3/8" S-hooks provides secure backup connection for RV, boat, utility trailer, campereBay logo, or hitch towing, preventing vehicle-trailer separation
  • High Strength Performance:Grade 30 steel chain rated 3,200 lbs break strength, ideal for heavy duty trailer towing, RV safety chain, boat trailer chain, and utility hauling
  • Quick Secure Coupling:Pre-attached 3/8" S-hooks allow fast, reliable attachment to trailer tongue, hitch loops, or tow vehicle frame; recommended to cross chains under coupler for safe towing
  • Rust & Weather Resistant:Black electrophoretic finish offers excellent corrosion protection, keeping safety chains durable for outdoor towing, boat trailer chain, campereBay logo chain, and utility trailer use
  • Bonus Chain Hanger Bracket:Includes safety chain hanger bracket for 2" shank, keeping chains off ground, preventing dragging, improving towing safety for RV, boat, and trailer applications
Bestseller No. 3
CURT 80010 48-Inch Trailer Safety Chain with 3/8-In S-Hooks, 2,000 lbs Break Strength
  • DEPENDABLE SAFETY. This trailer safety chain is designed to connect from your trailer to your vehicle to help resist complete vehicle-trailer separation in the event of a disconnection while towing
  • HIGH-STRENGTH. This trailer chain has a grade-30 rating and a minimum break force of 2,000 lbs. (two trailer safety chains advised; each safety chain must meet or exceed the gross trailer weight)
  • READY TO COUPLE. For safe, secure coupling to the vehicle, this 48-inch long trailer chain comes with two pre-attached safety chain hooks. The 3/8-inch S-hooks are fast and easy to install
  • EASY TO USE. When connecting safety chains for towing, two chains should be used. The safety chains should be crossed once underneath the coupler and hooked onto the trailer hitch receiver safety chain loops
  • CORROSION-RESISTANT. This trailer safety chain is constructed from 3/16-inch diameter, high-strength steel links and is protected with a durable zinc plating to resist rust and corrosion in spite of the outdoor elements
Bestseller No. 4
Tnyeobae 27" Trailer Safety Chain Kit with 5/16" Spring Hooks, Grade 30 Heavy Duty Steel Towing Chains 7000 lbs Capacity for RV, Boat & Utility Trailer, Zinc-Plated Rust Resistant, 2 Pack
  • 7,000 LBS TOWING SECURITY. Engineered with high-strength Grade-30 steel, this safety chain kit provides a reliable Class II 7,000 lbs break strength. It acts as a vital fail-safe connection between your vehicle and trailer, ensuring peace of mind even if your primary hitch disconnects on bumpy roads.
  • SECURE SPRING LATCH HOOKS. Unlike basic S-hooks that can bounce out, our 5/16" hooks feature a heavy-duty spring-loaded safety latch. This design prevents accidental unhooking during tight turns or sudden stops, making your towing setup significantly more secure and compliant with safety standards.
  • WEATHER-READY ZINC FINISH. Stop worrying about orange rust ruining your gear. Each chain link and hook is treated with a premium silver zinc plating, providing exceptional corrosion resistance. Whether you are launching a boat in saltwater or towing an RV through snow, these chains stay clean and strong.
  • READY-TO-USE VERSATILITY. The 27-inch total length (including hooks) is optimized for most standard towing setups. It's the ideal replacement for worn-out chains on utility trailers, camperseBay logo, or boat trailers. The flexible links allow you to easily cross the chains under the trailer tongue to create a safety cradle.
  • EFFORTLESS INSTALLATION. No tools required! The quick-link design makes hooking and unhooking a breeze, saving you time at the boat ramp or campsite. This 2-pack kit provides a complete safety solution, ensuring you meet legal towing requirements with professional-grade equipment that lasts..
SaleBestseller No. 5
YATOINTO 2-Pack Grade 80 Trailer Safety Chain 36 Inch, Black Electrophoresis Finish with 5/16'' Red Clevis Snap Hook and Chain Retainer | Heavy Duty Transport Chain WLL 25,000 lbs for Towing
  • [EP FINISH & UPGRADED G80] Constructed from high-strength alloy steel and treated with an advanced electrophoresis (EP) finish, these Grade 80 trailer safety chains deliver outstanding durability with a sleek, rust-resistant exterior. The EP coating prevents chipping and peeling, unlike traditional blackened methods, keeping your chains clean and professional.
  • [PROFESSIONAL SAFETY DESIGN] Engineered for reliable vehicle-to-trailer connections, the bright red clevis snap hooks are not only highly visible but also provide a secure and easy-to-use connection point. Remember to use two safety chains to ensure maximum safety during towing.
  • [HEAVY-DUTY BUILD] Built with a 5/16" standard link design and a durable EP finish, these chains undergo rigorous heat treatment and strength testing. The finish keeps them looking clean and professional without leaving residue on your hands or equipment, unlike traditional blackened chains.
  • [RELIABLE TRANSPORTATION] These 36-inch safety chains are rated as Grade 80, offering superior tensile strength for heavy-duty towing. The black and red color combination enhances visibility, and the EP coating resists wear and corrosion for longer-lasting performance.
  • [SAFETY & COMPLIANCE] Each chain and clevis snap hook is embossed with proper markings to meet NACM standards, ensuring compliance during DOT inspections. Always ensure the safety chains exceed the gross trailer weight for a secure towing experience.

Last update on 2026-05-24 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...