Brake Light Pressure Switch Malfunction – 2020-2021 Crane Carrier LET2

March 11, 2021 NHTSA CAMPAIGN NUMBER: 21V166000

Brake Light Pressure Switch Malfunction

Jammed electrical contacts in the brake light switch can cause the brake lights to remain illuminated, or fail to illuminate. Either of these scenarios can increase the risk of a crash.

 

NHTSA Campaign Number: 21V166

Manufacturer Crane CarriereBay logo Company

Components EXTERIOR LIGHTING

Potential Number of Units Affected 298

 

Summary

Crane CarriereBay logo Company (Crane CarriereBay logo) is recalling certain 2020-2021 LET2 vehicles equipped with certain SL-4 Brake Light Pressure switches. When air pressure is supplied to the brake light switch it may leak, possibly causing the internal electrical contacts to become jammed.

 

Remedy

Crane CarriereBay logo will notify owners, and dealers will inspect the brake light switch manufacturing date, and replace it if necessary, free of charge. The recall began on March 25, 2021. Owners may contact Crane CarriereBay logo customer service at 1-877-546-2537.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


Units Involved: Chassis produced between the dates of December 2019 and March 2021. A list of suspect vehicles is attached part of this service bulletin.

Topic: Inspection and replacement of suspected defective BendixeBay logo SL-4 Stop Light switches.

BendixeBay logo has determined that a component manufactured at a BendixeBay logo sub-supplier was not within specification limits and has led to the potential defect – improperly formed threads do not provide necessary clamp loads to withstand normal air brake system pressures. This may cause the SL-4 switch to remain in either the open or closed state, resulting in the vehicle stop lamps staying illuminated or not extinguishing promptly. If the pressure switch is used to control brake lamps, the result of the jammed contacts might be that the brake lights do not illuminate or that the brake lights constantly remain illuminated increasing the risk of a crash. To correct this, CCC is authorizing an inspection and replacement of the SL-4 switch.

 

Warranty Status: Reimbursement by warranty claim utilizing one of the following codes:

  • 00-BDX-001: Inspection without replacement – 0.3 hours.
  • 00-BDX-002: Inspection and replacement of one (1) switch – 0.5 hours.
  • 00-BDX-003: Inspection and replacement of two (2) switches – 1.0 hours.
  • Order Part Number: 308F-0001, max quantity of two (2)

 

Urgent attention to this service bulletin is required. Failure to complete this service in a timely manner may result in equipment damage or personal injury.

 

Service Instructions:

1. Determine if the chassis is one of the suspected units by referencing the following list. If the unit is on the list, proceed to step two, if it is not, no further action is required.

 

2. Locate the stop light switches located on the double check valves, under the right-hand side of the cab on the inside of the frame rail.

 

3. Inspect the switches to determine if the date code can be found, and if it is shown as “12/19” or “01/20”. The BendixeBay logo® SL-4™ stop light switch includes a date code printed on a white BendixeBay logo label affixed to the unit. The date code, featuring a “Month/Year” format, appears in red type. Stop light switches covered by this campaign would have a date code of either 12/19 or 01/20. For example, an SL-4 stop light switch manufactured in December of 2019 will have a date code of “12/19” in red type, and an SL-4 stop light switch manufactured in January of 2020 will have a date code of “01/20” in red type. Verification of the date code is required to determine if the stop light switch is a part of the recall campaign.

 

4. If the date code can be determined and is not in the specified range, no further action is required. If one or both switches is within the specified range, proceed to step 5.

 

5. Remove the two wires from the suspect switch. Remove the switch from the manifold utilizing the appropriate size wrench.

 

6. Reinstall the new switch utilizing the reverse procedure from step 5.

 

7. Verify the operation of brake lights by building up a minimum of 120 psi air pressure, release the parking brakes, and applying the service brakes. Brake lights should come on with the service brakes applied and go off with the service brake released. Ensure the wheels are chocked before releasing the parking brake.

 



2 Affected Products

Vehicle

MAKEMODELYEAR
CRANE CARRIEReBay logoLET22020-2021

 


7 Associated Documents

Remedy Instructions and TSB

RCRIT-21V166-1676.pdf 762.004KB

 


Defect Notice 573 Report

RCLRPT-21V166-1588.PDF 215.583KB

 


Recall Acknowledgement

RCAK-21V166-7202.pdf 645.83KB

 


Remedy Instructions and TSB

RCRIT-21V166-2095.pdf 529.617KB

 


Owner Notification Letter(Part 577)

RCONL-21V166-7587.pdf 206.955KB

 


Recall Quarterly Report #1, 2021-1

RCLQRT-21V166-4161.PDF 211.139KB

 


Recall Quarterly Report #2, 2021-2

RCLQRT-21V166-0300.PDF 211.235KB

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V166&docType=RCL

 


 

Bestseller No. 1
Nakkaa Pair Tail Lights W/Bulbs Compatible with 2003-2006 Silverado 1500 2500 3500HD Red Brake Lamps Left and Right GM2800174 GM2801174
  • 1)Adaptation: Tail light compatible with 2003 2004 2005 2006 Silverado 1500 2500 3500 HD. Please check our photos and ensure that the displayed parts look the same as the model you need
  • 2)Excellent Quality: Our tail lights are made of excellent quality materials, reliable and long-lasting, even in bad weather conditions to bring you a safe and comfortable driving experience
  • 3)Replacement Part Number: GM2800174, GM2801174, GM277-B100L, GM277-B100R, 19169004, 19169005
  • 4)Improved Visibility: Our tail lights are brighter and clearer. This not only improves the visibility of the vehicle, but also improves the visibility of other drivers, which improves overall safety on the road
  • 5)Easy Installation: Tail lights are easy and convenient to install, plug and play, saving both time and effort. If you have no installation experience, professional installation is recommended for best results
SaleBestseller No. 2
AUXITO Upgraded 7440 7443 LED Bulb Red for Tail Lights Brake Lights, Super Bright T20 W21W 7441 7444 LED Replacement for Stop Tail Brake Signal Lights, Pack of 2
  • Non-polarity. Can be used for brake lights, tail lights, stop lights, parking light, daytime running light, etc. Some sensitive vehicles will meet canbus issue after installing, load resistors or flasher relay will be required to solve these issues, you can contact us through Amazon Buyer Message to get help and solutions
  • Low power and high brightness. 5.5W per 7443 led red bulb. Only 1/4 energy consumption of original 7443 red bulb, yet several times brighter. Built in smart IC driver ensure constant current, no radio interference. Plus instant-on capability with zero warm-up time
  • Unique imitated halogen shape design. Resembling halogen bulb shape design and sequencing 54 pieces 4014-SMD LED chips precisely around the light. Delivering 360° high luminous efficiency with full amber light, easier to be noticed and safer to drive
  • Small size comparable to OEM 7440 bulbs Non-polarity, applied to US standard and CK sockets. Fits: 992, 7440, 7441, 7443, 7442, 7444, W21W, WY21W, 7440NA, 7440NAK, 7444NA,7444NAK, 7443LL.etc. Amazon filter system may not be 100% accurate or up to date, if you are not sure which bulb model fit your vehicle, please check your vehicle owner manual to confirm or ask a question for help
  • Electroplating process housing. Improves oxidation resistance and produces less heat. High-end styling, matching great in the assembly. Ideal replacement for your halogen 7440 red bulbs
SaleBestseller No. 3
SYLVANIA - 2357 Long Life Miniature - Bulb, Ideal for Daytime Running Lights (DRL) and Back-Up/Reverse Lights (Contains 2 Bulbs)
  • Lights Dim Over Time, Replace In Pairs: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind.
  • Easy To Replace: Sylvania Long Life miniature bulbs are easy to install and show instant results.
  • Low Maintenance And High Durability: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting.
  • Longer Life Than Most Standard Bulbs: Long Life bulbs perform twice as long as any other standard miniature bulbs.
  • The Sylvania Standard Of Quality: With over 100 years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket.
Bestseller No. 4
AmeriLite for 2003-2006 Chevy Silverado OE Style Ruby Red Replacement Taillights Rear Brake Lamp Set with Incandescent Bulbs and Harness Vehicle Light Assembly - Passenger and Driver Side
  • [Fit For] - 03-06 Chevy Silverado 1500 / 2500 / 3500; [NOT Fit For] - 03 Silverado 3500 HD & Stepside Beds Models
  • [DOT & SAE] - Meets or exceeds all U.S. & Canadian safety standards
  • [Easy Install] - Direct OEM replacement, no modification required
  • [New Aftermarket Set] - Includes BOTH driver (left) & passenger (right) sides
  • [Quality Assurance] - Made in Taiwan with premium materials & strict QC standards
Bestseller No. 5
iFunyLED 4PCS 3157 LED Bulb Brake Tail Light 12V-24V Super Bright 3156 3056 3057 3047 4157 LED Replacement Light Kit Set for Car Tail Brake Lights - Brilliant Red
  • Key Specs: Voltage DC 12V-24V, 625nm Brilliant Red, Wattage 3w, low power consumption and fast heat dissipation for longer lifespan. The 3157 led light bulbs are compatible with 3056 3156 3157 3157K 3057R 4057 4157 etc.
  • High Quality: iFunyLed 3157 led lights use high quality LED chips and circuit boards, built-in intelligent IC driver, hardly delaying or flickering, bulb life up to 50,000 hours.
  • Wide applicability: iFunyLED 3157 Red LED bulb can be used as a brake light, tail light, etc. If the bulb flashes or does not light up, it is necessary to add a load resistor to replace the relay and solve this problem.
  • 300% Brighter: Our 3157 bulb has 54 pieces of 3014 led chips on it, 360 degree lighting angle, no blind spot.
  • Professional Service: Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.

Last update on 2026-06-13 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...