September 1, 2021 NHTSA CAMPAIGN NUMBER: 21V683000
Seat Belt Locking Retractor Malfunction/FMVSS 208
An unsecured child restraint system can increase the risk of injury during a crash.
NHTSA Campaign Number: 21V683
Manufacturer Polestar
Automotive USA, Inc.
Components SEAT BELTS
Potential Number of Units Affected 2
Summary
Polestar
Automotive USA, Inc. (Polestar
) is recalling certain 2021 Polestar
PS1 vehicles. The seat belt automatic locking retractors may deactivate early, which can prevent the child restraint system from securing properly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, “Occupant Crash Protection.”
Remedy
Dealers will inspect and replace the seat belt assemblies, as necessary, free of charge. Owner notification letters were mailed October 22, 2021. Owners may contact Polestar
customer service at 1-800-806-2504. Polestar
’s number for this recall is R10112.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Condition
Thereโs a risk that the Automatic Locking Retractor (ALR) in the front passenger seat belt may not work as intended.
Decision
Polestar
has decided that all cars, concerned by this QB, shall be inspected and if necessary modified in accordance with this QB, without delay.
Policy Settlement
100% Part and Labor
Polestar
Authorized Service points are not expected to contact customers to inform of recall / Active service action either via letter or phone call. Customer will be contacted by Polestar
Support.
Note Corrective Actions
Functionality test the front passenger seat belt according to attached instructions. If necessary, replace the seat belt according to VIDA.
If replacing seat belt a SWDL RMR/RML Reload and a Total upgrade is needed.
Polestar
Authorized Service points are not expected to contact customers to inform of recall / Active service action either via letter or phone call. Customer will be contacted by Polestar
Support.
Polestar
Service Method
Inspection/ Control, Automatic Locking Retractor (ALR). Passenger Seat Belt.
Note! The front passenger seat must be in its rearmost and highest position and the height adjuster in its lowest position, such as the amount of belt getting retract inside the seatbelt retractor is at its maximum.
Step 1: Put the safety belt across the empty vehicle seat and insert the metal tongue of the belt into the buckle.
Step 2: Pull the safety belt all the way out of the retractor to activate the Automatic Locking Retractor (ALR).
Step 3: Carefully let the safety belt retract fully into the retractor while the belt remains buckled, which simulates a restrained child seat
. You will notice that when in ALR mode, there is a ratcheting/clicking noise from the retractor. This is normal.
Step 4: Grasp the torso portion of the safety belt and carefully pull on the belt in an attempt to pull the belt back out of the retractor. The belt should not pull out of the retractor.
Step 5: Unlatch the belt, and let it completely retract back into the retractor.
Step 6: Repeat steps 1 to 5, six times
Conclusion: Is the safety belt locked so that the strap cannot be pulled out of the retractor in step 4?
Yes: The ALR function works properly, and the safety belt assembly meets requirements
No: ALR does not work properly, the safety belt must be replaced according to the repair instructions in VIDA.
NEW VEHICLES IN RETAILER INVENTORY
It is a violation of federal law for a retailer to deliver any new Polestar
that is eligible for a recall. Service Points are advised to check all vehicles in inventory for recall eligibility and repair immediately. Violation of this requirement by a Service Point could result in a civil penalty of up to $22,723 per vehicle.
Correct all vehicles in your new vehicle inventory before delivery.
USED VEHICLES IN INVENTORY
Polestar
is ordering the stop-delivery of affected vehicles in auction and inventory until the recalled item can be repaired.
Stopping the delivery of affected used vehicles until the recall is complete is consistent with Polestar
commitment to safety. Additionally, while Federal law does not prohibit the sale of used vehicles with open recalls, the sale of such cars could violate certain state laws and create liability on behalf of the service point.
What does this mean for customers?
Customers will not be able to take delivery of affected vehicles until the recall has been completed.
When will this be resolved?
Polestar
on behalf of Polestar
Performance AB, have decided to launch Recall R10112 on certain model year 2021 Polestar
1 vehicles.
Polestar
investigations have identified that there may be a risk that certain seat belts with the Automatic Locking Retractor (ALR) have not been produced according to specifications and may result in early deactivation of locking feature used to tightly secure a child restraint system/seat.
The subject seat belt assemblies have a feature that converts the retractor from an emergency locking retractor (ELR) to an automatic locking retractor. The seat belts convert to the ALR mode after the webbing has been fully withdrawn from the retractor. The system is designed so that as the seat belt is released into the retractor, the ALR function remains active so a child restraint seat can be tightly secured. However, in certain seat belt assemblies the ALR function deactivates early before the webbing is fully retracted.
This noncompliance does not impact the compliance or functionality of the seat belt assemblies with respect to their normal use by adult passengers or use of the LATCH system to secure child restraint seats. This only affects the functionality of the right front seat belt when used to secure a child restraint seat using the seat belt.
With child restraint seats, which the vehicle owner elects to use the seat belt to secure the child restraint seat instead of the LATCH system, if the seat belt is not lockable, there is an increased risk of injury in a crash to the occupant of the child restraint seat.
To remedy the concerned vehicles, Polestar
needs to inspect and perform a functionality test. If necessary, the affected seat belt will be replaced with a seatbelt assembly that contains ALR levers that were manufactured according to production specifications.
A total of two (2) U.S. vehicles are eligible for this recall. Vehicle eligibility must be confirmed:
- Vehicle Inquiry โ Warranty Vehicle Inquiry where the message “Recall R10112 Polestar
1 Seat Belt Retractorโ will appear for eligible vehicles, F4+History from the main Inquiry menu must be selected to confirm Recall R10112ย has not been completed. - Recall R10112 eligible vehicles not yet delivered to end customers must be corrected prior to delivery.
All vehicles must be checked for any incomplete recalls or service campaigns or service upgrades. All open Recall, Service Campaigns or Service Action repairs must be completed.
OWNER NOTIFICATION
An owner notification letter will be sent out that will notify the owner of this recall instructing them to contact their Polestar
Service Point and request an appointment to have this repair completed.
PORT VEHICLES
NOT all eligible vehicles arriving from the ports will have this recall completed. Vehicle eligibility must be confirmed.
SERVICE POINT RESPONSIBILITIES
The Service Point must perform this recall campaign on eligible vehicles regardless of miles/kilometers or vehicle age. All work performed under this recall is free of charge to the owner. As the safety of our customers is our utmost priority, we are taking full responsibility to ensure the highest quality and safety standards for our cars.
If you have questions about this recall or any other field service action, please contact me or any member of Customer.
1 Affected Product
Vehicle
8 Associated Documents
Recall Acknowledgement
RCAK-21V683-3252.pdf 645.154KB
Polestar
Recall 573 Report
RCLRPT-21V683-1299.PDF 216.004KB
Owner Notification Letter(Part 577)
RCONL-21V683-5304.pdf 726.247KB
Remedy Instructions and TSB
RCRIT-21V683-8823.pdf 66.651KB
Remedy Instructions and TSB
RCRIT-21V683-2719.pdf 135.024KB
Recall Quarterly Report #1, 2021-4
RCLQRT-21V683-6325.PDF 211.148KB
Manufacturer Notices(to Dealers,etc) – September 1, 2021 Subject: Recall R10112
RCMN-21V683-0843.pdf 145.445KB
Recall Quarterly Report #2, 2022-1
RCLQRT-21V683-4397.PDF 211.246KB
Latest Recalls Documents
- [Easy to UseโWork Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest softwareโno need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note๏ผThe device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
- [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When itโs an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You donโt need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you donโt need to pay extra money to buy a solid toolbox.
- ใReset ABS/SRS/Transmission/Engine Lightsใ More than an check engine code reader, OBDMATE OM901 obd2 scanner performs comprehensive diagnostics for the 4 most-used systems (ABS/SRS/Engine/Transmission). It quickly clears fault codes, turns off warning lights, read data stream and auto VIN.
- ใ3.5" Handheld Scanner with 4 System Diagnoseใ 3.5" Super large TFT screen equipped displays an intuitive menu and clear readings of various sensors from ABS, SRS, ECM and TCM systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any batteries or updates required.
- ใOne-Click I/M Readines&Full OBD2 Functionsใ Press F1 to get an intuitive corloured form about whether various emissions-related systems on the vehicle are operating properly. Help you get smog-check ready quickly. OM901 car scanner supports all essential OBD2 functions you need: read & clear codes, view freeze frame, read I/M readiness, retrieve VIN, live data stream (with graphing display), O2 sensor test, onboard monitoring mode, and EVAP leak test.
- ใBattery Voltage Check&DLC Pin Testใ It allows you to monitor battery health by monitoring current battery voltage. Plus, this obd2 diagnostic tool features DLC 16-PIN test to check current voltage of every pin.
- ใAutomotive Scanner Diagnostic Kitใ The package comes with 1 car scanner, 1 USB-type c cable, 1 hard storage bag and 1 user manual(en). Free to update without any hidden fees. 5 languanges available in setting including English, French, Italian, German and Espanish. Valuable and Portable, making it a great tool kit for car owners, DIY enthusiasts, and professional mechanics.
- [Diagnose Like a Pro] BlueDriver Pro Next-Gen is a professional OBD2 scanner and diagnostic tool that helps you scan, understand, and clear vehicle trouble codes with confidence. Turn your phone into a powerful car diagnostic scannerโno guesswork, no unnecessary repairs.
- [Read and Clear More Codes Than Ever] Read and clear more codes than basic car code readers. Access enhanced diagnostics for Check Engine, ABS, SRS, Airbag, TPMS, Transmission, and more on supported vehicles, including expanded coverage on newer model years.
- [Verified Fixes and Real-Time Data] Get unlimited, technician-verified repair reports matched to your VIN, with definitions, causes, and confirmed fixes. Monitor live vehicle data as you drive, view freeze frames, check smog readiness, and analyze Mode 6 test results.
- [Expanded Make & Model Coverage] Optimized for todayโs vehicles with strong support for GM, Ford
, Stellantis (RAM
, Jeep
, Chrysler
), Toyota
, Honda
, Nissan
, Mazda
, Subaru
, Hyundai
, Mercedes-Benz
, BMW
, and VW
. Enhanced communication on select 2024+ Nissan
and Mazda
models (see compatibility chart). - [Gas Vehicles 1996+ & Select Light-Duty Trucks] Works with all gas-powered vehicles made in 1996 or newer, plus select light-duty trucks and diesels, including F-250, RAM
2500, Silverado, and Sierra. Built for daily drivers, family vehicles, and real-world truck use.
- PAID FOR ITSELF ON THE FIRST USE - SKIP MORE DIAGNOSIS FEE: One visit to a dealership just for diagnosis can easily c-ost 200 or more before any repair begins. The NT614 Elite foxwell scanner brings professional vehicle diagnostics right to your driveway. Unlike basic code readers that only read check engine lights, it scans 4 critical systems โ Engine, ABS, SRS, and Transmission to pinpoint exactly where the problem is and why. Read and clear trouble codes and perform essential resets including ABS Bleeding, SAS Calibration, EPB Reset, Oil Reset, and Throttle Reset. Stop paying shops just to "take a look"
- UPGRADE OF NT604 - 5 ESSENTIAL RESET SERVICES, BRING 1000+ OF SHOP SERVICES HOME: Most 4-system car scanners stop at reading codes. The NT614 Elite obd2 scanner goes further by supporting 5 commonly used maintenance resets that repair shops often charge hundreds for: ABS Bleeding, EPB Reset, Oil Reset, SAS Calibration, Throttle Relearn. Just one brake service can offset the c-ost of the tool
- 15 SECONDS FAST DIAGNOSIS, SMART AUTOVIN, PLUG & PLAY: Simply plug into the OBD2 port, one click AUTOVIN, the code reader automatically retrieves your VIN and enters diagnostic mode in about 15 seconds. No complicated setup required. Instantly identify your vehicle and access the relevant systems. Whether you're a DIY car owner, beginner, or mechanic, you can quickly locate problems and make informed repair decisions. (NOTE: 1.A few cars need to manually enter the VIN. 2.Vehicles with CAN protocol support fast diagnosis in 15 seconds)
- PERFORM ABS BLEEDING AT HOME โ RESTORE BRAKE PEDAL FEEL: After replacing brake pads, calipers, or brake fluid
, air can enter the brake system, causing a soft or sinking brake pedal and longer stopping distance. The NT614 Elite code reader for cars and trucks supports ABS Bleeding, helping remove trapped air from the brake lines and restore proper brake pressure. Maintain safer braking performance without a shop visit. (NOTE: A few cars don't support ABS Bleeding function, pls check it before purchase๏ผ - LIVE DATA GRAPHING + BUILT-IN DTC LIBRARY + LIFETIME WiFi UPDATES: Not sure what a fault code means or how your sensors are performing? The NT614 Elite scanner for car displays real-time live data (RPM, speed, O2 sensors, transmission temp, and more) in easy-to-read graphs, helping you quickly spot abnormal fluctuations. The built-in DTC library explains trouble codes directly on screen-no phone or internet search required. You can save diagnostic data and print reports for further analysis or sharing with your mechanic. Simply connect to WiFi for lifetime free updates, with no SD card required
- [All System Diagnostics, Professional-Level Scanner] - BLCKTEC 460T is the ultimate OBD2 diagnostic tool for home mechanics and professionals. It supports all 10 OBD2 modes, reads and clears Engine/Transmission/ABS/SRS codes, performs All-System Diagnostics, offers workshop reset tools, and provides real-time live data. It helps you pinpoint issues, assess your car's condition, and prepare for SMOG checks with ease. NOTE: Function availability depends on your vehicle. Before you buy, be sure to use the Compatibility Checker on BLCKTEC website or contact our customer support to verify that the features you need are supported for your vehicleโs specific year, make, and model.
- [12+ Most Popular Reset Functions] - BLCKTEC 460T OBD2 scanner offers 12+ dealer-level service functions, including Oil Maintenance Reset, ABS Bleeding, EPB Reset, SAS(Steering Angle Sensor) Recalibration, DPF(Diesel Particulate Filter) Reset, Throttle Body Relearn, Battery Reset/Initialization, TPMS Relearn, Transmission Reset, Fluid Change Reset, Maintenance Reset and more, enabling you to perform workshop services like a pro. NOTE: Function availability depends on your vehicle. Be sure to use the Compatibility Checker on BLCKTEC website to verify that the features you need are supported for your vehicle.
- [Real-Time OBD2 and OEM Live Data, Freeze Frame Data] - BLCKTEC 460T helps diagnose vehicle issues when warning lights like Check Engine Light or ABS/SRS Light appear. It offers detailed DTC info, ECU Freeze Frame Data, and real-time OBD2 and advanced OEM live data, including Engine, Transmission, ABS, SRS, and more, making it easy to diagnose and resolve vehicle problems. You can view, graph, record, replay, and overlay up to four live data streams in a single graph for better analysis.
- [AutoVIN, AutoReLink, AutoScan, 3X Faster] - Equipped with AutoVIN technology, 460T automatically retrieves the VIN to save you time. Its AutoScan and AutoReLink features scan all of the vehicle's ECUs and detect any fault codes immediately after you plug the scanner into the vehicle's OBD2 port - no button presses required. Additionally, it regathers DTC and I/M readiness information every 30 seconds, simplifying monitor tests. 460T's advanced technology makes it 3X faster than other products.
- [Get RepairSolutions2, the #1 Auto Repair App for Free] - When paired with RepairSolutions2(RS2) App, 460T becomes even more powerful. RS2's Verified Fix Database built by master technicians, provides the parts needed for the repair. Additionally, RS2 gives you access to OEM warranty info, maintenance schedules, TSB, and dealership recall info, making car care easier than ever. RS2 is free with no subscription fees and it stores your car scan reports in the cloud, allowing you to access, share, or print them anytime and anywhere.
Last update on 2026-06-13 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
Polestar
Service and Parts Business Quality Bulletin TITLE: PS Seat belt Retractor GROUP: 88 NO: R10112 ISSUING DEPARTMENT: Product, Safety and Compliance REVISIONS: ISSUE DATE: 2021-09-22 STATUS DATE: 2021-09-29 Page 1 of 4 Produced and printed in the USA and available as an electronic document. ยฉ Polestar
2021 CAR MARKET: United States Attachment File Name R10112 – Concerned cars.xlsx Functionality test_ALR_PS1_EN01.docx Quality Actions Type Variant Chassis From Chassis To MY From MY To Assembly Plant 232 Polestar
1 0000976 0000978 2021 2021 Model Info Models Model Years Polestar
1 2021-2021 Condition Thereโs a risk that the Automatic Locking Retractor (ALR) in the front passenger seat belt may not work as intended. Decision Polestar
has decided that all cars, concerned by this QB, shall be inspected and if necessary modified in accordance with this QB, without delay. Policy Settlement 100% Part and Labor Page 2 of 4 2021-09-29 Quality Bulletin R10112 Polestar
Authorized Service points are not expected to contact customers to inform of recall / Active service action either via letter or phone call. Customer will be contacted by Polestar
Support. Note Corrective Actions Functionality test the front passenger seat belt according to attached instructions. If necessary, replace the seat belt according to VIDA. If replacing seat belt a SWDL RMR/RML Reload and a Total upgrade is needed. Polestar
Authorized Service points are not expected to contact customers to inform of recall / Active service action either via letter or phone call. Customer will be contacted by Polestar
Support. Labor Operations Op No JV Times/Car Main Op Description Competence Req 99921-2 1 M Check seatbelt function ALR acc. To QB-R10112 Volvo
Level 1 Technician 97786-2 1 Seat belt front x1 replace acc. To QB-R10112 (including SDWL) Volvo
Level 2 Technician Labor Text *NOTE) Operation number 97786-2 has the software download RMR/RML Reload and Total Upgrade included. Parts Required Part No Qty Failing Part Description 31675302 0-1 F Seat belt Front RH Yellow 32137209 0-1 Total Upgrade PS1 32283143 0-1 SWDL RML/RMR Reload PS1 985047 0-1 Flange screw Parts Text NOTE* Due to very low predicted failure rate and parts availability, DO NOT ORDER any parts until confirmed issue. CSC Customer Symptom Codes Code Description XW Service/repair/Service action/Recall Cause Code Description Code Description 02 PERFORMED REPAIR 2021-09-29 Page 3 of 4 Quality Bulletin R10112 VIN: Type: Chassi: MY: Resp. Importer: Resp. Dealer: LPSBE0YL7MB000976 232 0000976 2021 3 US 7510 6 US 6631 LPSBE0YL0MB000978 232 0000978 2021 3 US 7510 6 US 6634 Page 4 of 4 2021-09-29 Quality Bulletin R10112 Polestar
Service Method Inspection/ Control, Automatic Locking Retractor (ALR). Passenger Seat Belt. Note! The front passenger seat must be in its rearmost and highest position and the height adjuster in its lowest position, such as the amount of belt getting retract inside the seatbelt retractor is at its maximum. Step 1: Put the safety belt across the empty vehicle seat and insert the metal tongue of the belt into the buckle. Step 2: Pull the safety belt all the way out of the retractor to activate the Automatic Locking Retractor (ALR). Step 3: Carefully let the safety belt retract fully into the retractor while the belt remains buckled, which simulates a restrained child seat
. You will notice that when in ALR mode, there is a ratcheting/clicking noise from the retractor. This is normal. Step 4: Grasp the torso portion of the safety belt and carefully pull on the belt in an attempt to pull the belt back out of the retractor. The belt should not pull out of the retractor. Step 5: Unlatch the belt, and let it completely retract back into the retractor. Step 6: Repeat steps 1 to 5, six times Conclusion: Is the safety belt locked so that the strap cannot be pulled out of the retractor in step 4? Yes: The ALR function works properly, and the safety belt assembly meets requirements No: ALR does not work properly, the safety belt must be replaced according to the repair instructions in VIDA.
**************************************************************************************************************
Produced and printed in the USA and available as an electronic document. ยฉ Polestar
2021 Polestar
Service and Parts Business Parts Bulletin TITLE: Recall R10112 Polestar
1 Seat belt Retractor Model Year: Polestar
1 2021 GROUP: 88 NO: R10112 CAR MARKET: United States REVISIONS: ISSUE DATE: 2021-09-29 STATUS DATE: 2021-09-29 Page 1 of 2 Reference Bulletins: QB R10112 Polestar
on behalf of Polestar
Performance AB, have decided to launch Recall R10112 on certain model year 2021 Polestar
1 vehicles. Only two VINS are affected by Recall R10112. Volvo
Cars investigations have identified that there may be a risk that certain seat belts with the Automatic Locking Retractor (ALR) have not been produced according to specifications and may result in early deactivation of the locking feature used to tightly secure a child restraint system/seat. The subject seat belt assemblies have a feature that converts the retractor from an emergency locking retractor (ELR) to an automatic locking retractor. The seat belts convert to the ALR mode after the webbing has been fully withdrawn from the retractor. The system is designed so that as the seat belt is released into the retractor, the ALR function remains active so a child restraint seat can be tightly secured. However, in certain seat belt assemblies the ALR function deactivates early before the webbing is fully retracted. This noncompliance does not impact the compliance or functionality of the seat belt assemblies with respect to their normal use by adult passengers or use of the LATCH system to secure child restraint seats. While using child restraint seats, which the vehicle owner elects to use the seat belt to secure the child restraint seat instead of the LATCH system, if the seat belt is not lockable, there is an increased risk of injury in a crash to the occupant of the child restraint seat. The corrective action is to inspect and perform a functionality test. If necessary, the affected seat belts will be replaced with a seat belt assembly that contains ALR levers that were manufactured according to production specifications. Page 2 of 2 2021-09-29 Parts Bulletin 88-R10112 The following part numbers apply: Part Number Description Qty 31675302 Seat Belt Front RH Yellow 1 32137209 Total Upgrade PS1 1 32283143 SWDL RML/RMR Reload PS1 1 985047 Flange screw 1
**************************************************************************************************************
October 25, 2021 IMPORTANT SAFETY RECALL mis NOTICE APPLIES TO YOUR VEHICLE, VIN Dear Polestar
A. Owner, NHTSA RECALL 21V-683 This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Polestar
Performance AB has decided that certain 2021 Polestar
l vehicles fail to conform to Federal Motor Vehicle Safety Standard No. 208 “Occupant Crash Protection”. The reason for Recall Rt 0112: Polestar
Perfomiance AB investigations have identified that there may be a risk that certain seat belts with the Automatic Locki11g Retractor (ALR) have not been produced accordi11g to specifications and may result in early deactivation of locki11g feature used to tightly secure a child restraint system/seat. The subject seat belt assemblies have a feature that converts the retractor from an emergency locking retractor (ELR) to an automatic locking retractor. The seat belts convert to the ALR mode after the webbing has been fully withdrawn from the retractor. The system is designed so that as the seat belt is released into the retractor, the ALR function remains active so a child restraint seat can be tightly secured. However, in certain seat belt assemblies the ALR function deactivates early before the webbing is fully retracted. This noncompliance does not impact the compliance or functionality of the seat belt assemblies ยทwith respect to their normal use by adult passengers or use of the LATCH system to secure child restraint seats. This only affects the functionality of the right front seat belt when used lo secure a child restraint seat using the seat belt. With child restraint seats, which the vehicle owner elects to use the seat belt to secure the child restraint seat instead of the LATCH system, if the seat belt is not lockable, there is an increased risk of injury in a crash to the occupant of the child restraint seat. Rcc:dl action: Rl.0112: The corrective action is to inspect ai1d perfom1 a functionality test. If necessary, tJ1e affected seat belt will be replaced with a seatbelt assembly that contains ALR levers that were manufactured according to production specifications, free of charge. Please contact your authorized Polestar
Service Poi11t to schedule an appointment for the repair to be completed. This procedure will be completed at no cost and can take up to one hour to complete, however due to service scheduling your Polestar
Service Point may require your vehicle for a longer period. lf you no longer own the vehicle described in this letter, please help us to update our records by sending us the updated owner information. Please refer to our contact information in this letter. Please contact: lfyou have any questions, please contact Polestar
Customer Support: 777 MacA11hur Blvd. Mahwah, NJ 07430 Or by phone at 1-800-806-2504, Monday – Friday, 9:00 am to 8:00 pm. You may also contact us by going to http ://www.polcstar.com/us/contact . We have advised the National Highway Traffic Safety Administration (NHTSA) that we are conducting this recall. If you are unable to have this procedure performed without charge, and within a reasonable period of time, you may contact the NHTSA Administrator at: National Highway Traffic Safety Administration 1200 New Jersey A venue, SE. Washington, DC 20590 Or you can call the toll-free Vehicle Safety Hotline at l-800-327-4236 (TTY: l-800-424-9153). You may also go to their website, http ://www.safercar.gov. Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. To learn more about Polestar
safety recalls, visit us at: https :/ /www. polestar
. com/us/recall-information/ Thank you for being a member of the Polestar
family We hope you will appreciate our efforts to continually provide you with updated information of importance to your safety and the quality of your Polestar
I vehicle. Sincerely, Steve DeGrazio Head of Customer Service & Quality, North America 201-981-7066 Steve.degrazio0Jpolestar.com Polestar
Automotive USA Inc. 777 MacArthur Blvd Mahwah, NJ 07430 polestar
.com
**************************************************************************************************************
STEVE DeGRAZIO โ HEAD OF CUSTOMER SERVICE & QUALITY, NORTH AMERICA September 1, 2021 Subject: Recall R10112 TO: All U.S. Service Points NEW VEHICLES IN RETAILER INVENTORY It is a violation of federal law for a retailer to deliver any new Polestar
that is eligible for a recall. Service Points are advised to check all vehicles in inventory for recall eligibility and repair immediately. Violation of this requirement by a Service Point could result in a civil penalty of up to $22,723 per vehicle. Correct all vehicles in your new vehicle inventory before delivery. USED VEHICLES IN INVENTORY Polestar
is ordering the stop-delivery of affected vehicles in auction and inventory until the recalled item can be repaired. Stopping the delivery of affected used vehicles until the recall is complete is consistent with Polestar
commitment to safety. Additionally, while Federal law does not prohibit the sale of used vehicles with open recalls, the sale of such cars could violate certain state laws and create liability on behalf of the service point. What does this mean for customers? Customers will not be able to take delivery of affected vehicles until the recall has been completed. When will this be resolved? Polestar
on behalf of Polestar
Performance AB, have decided to launch Recall R10112 on certain model year 2021 Polestar
1 vehicles. Polestar
investigations have identified that there may be a risk that certain seat belts with the Automatic Locking Retractor (ALR) have not been produced according to specifications and may result in early deactivation of locking feature used to tightly secure a child restraint system/seat. The subject seat belt assemblies have a feature that converts the retractor from an emergency locking retractor (ELR) to an automatic locking retractor. The seat belts convert to the ALR mode after the webbing has been fully withdrawn from the retractor. The system is designed so that as the seat belt is released into the retractor, the ALR function remains active so a child restraint seat can be tightly secured. However, in certain seat belt assemblies the ALR function deactivates early before the webbing is fully retracted. This noncompliance does not impact the compliance or functionality of the seat belt assemblies with respect to their normal use by adult passengers or use of the LATCH system to secure child restraint seats. This only affects the functionality of the right front seat belt when used to secure a child restraint seat using the seat belt. With child restraint seats, which the vehicle owner elects to use the seat belt to secure the child restraint seat instead of the LATCH system, if the seat belt is not lockable, there is an increased risk of injury in a crash to the occupant of the child restraint seat. Polestar
Automotive USA Inc. 777 MacArthur Blvd Page 1 of 2 Mahwah, NJ 07430 Telephone +1-201-981-7066 To remedy the concerned vehicles, Polestar
needs to inspect and perform a functionality test. If necessary, the affected seat belt will be replaced with a seatbelt assembly that contains ALR levers that were manufactured according to production specifications. A total of two (2) U.S. vehicles are eligible for this recall. Vehicle eligibility must be confirmed: โข Vehicle Inquiry โ Warranty Vehicle Inquiry where the message “Recall R10112 Polestar
1 Seat Belt Retractorโ will appear for eligible vehicles, F4+History from the main Inquiry menu must be selected to confirm Recall R10112 has not been completed. โข Recall R10112 eligible vehicles not yet delivered to end customers must be corrected prior to delivery. All vehicles must be checked for any incomplete recalls or service campaigns or service upgrades. All open Recall, Service Campaigns or Service Action repairs must be completed. OWNER NOTIFICATION An owner notification letter will be sent out that will notify the owner of this recall instructing them to contact their Polestar
Service Point and request an appointment to have this repair completed. PORT VEHICLES NOT all eligible vehicles arriving from the ports will have this recall completed. Vehicle eligibility must be confirmed. PARTS / PARTS RETURN Please refer to Parts Bulletin R10112 which will be released shortly. We STRONGLY RECOMMEND you DO NOT ORDER replacement parts until the vehicle has been inspected and checked. Due to very low predicted failure rate and parts availability, as well as multiple part numbers dependent on Model, Model Year, Seat Belt Color and Seat Belt Position, DO NOT ORDER any parts before the confirmed faulty ALR. REPLACED PARTS WILL BE REQUESTED TO BE SENT BACK TO TMA FOR TESTING/ANALYSIS. Information will be made available on QB/Parts Bulletin. CLAIM SUBMISSION A Quality Bulletin will be released shortly. Please refer to the claim submission information in the Quality Bulletin. SERVICE POINT RESPONSIBILITIES The Service Point must perform this recall campaign on eligible vehicles regardless of miles/kilometers or vehicle age. All work performed under this recall is free of charge to the owner. As the safety of our customers is our utmost priority, we are taking full responsibility to ensure the highest quality and safety standards for our cars. If you have questions about this recall or any other field service action, please contact me or any member of Customer. Your cooperation in completing this important recall is greatly appreciated. Best regards, Steve DeGrazio Head of Customer Service and Quality, North America 201-981-7066 Steve.degrazio@polestar
.com
SEOCONTENT-END
This product presentation was made with AAWP plugin.






