NHTSA ID Number: 10194473
Manufacturer Communication Number: Bulletin 2019-6
Summary
Warranty Bulletin no 2019-6
Speed Sensor Wiring Harness-Corrugated Tube Installation- Unregistered Vehicles Only.
The front speed sensor wiring harness could get pinched during the front fender installation
PROBLEM
The front speed sensor wiring harness could get pinched during the front fender installation.
SOLUTION
Install corrugated tube on the speed sensor wiring.
PARTS REQUIRED
Order parts through regular channel.
| DESCRIPTION | PART NUMBER | QTY |
| Corrugated tube | 415079900 | *70 mm (2.75 in) per side |
| Electrical tape | Shop supply | |
| * When ordering, 1 quantity = 1 m (3.3 ft) | ||
CORRECTIVE ACTION
Repair
This operation is most effective when performing the PRE-DELIVERY INSPECTION (PDI) before installing the wheels.
Install the corrugated tube on the speed sensor and the flasher wiring harness.
Secure both ends with electric tape.
1. Ensure the corrugated tube touches the speed sensor protective boot.
SEOCONTENT-START
WARRANTY
BULLETIN
WARRANTY CAMPAIGN
CAUTION: All involved customers must be notified, all involved units must be corrected as per instruction herein.
Can-Am® On-Road RykerTM
Campaign no.: 2019–0010
February 21, 2019 Subject:Speed Sensor Wiring Harness- Corrugated
Tube Installation – Unregistered Vehicles
No. 2019-6
MODEL
YEAR
MODEL APPLICABILITY ADMISSIBLE UNITS
2019 Ryker
Unregistered
vehicles only
Go to BOSSWeb/Warranty/Campaign Monitoring
to know the quantity of units in your inventory
impacted by this campaign
IMPORTANT
– When a vehicle comes in for service, always type the VIN in Knowledge Center to check
for pending campaigns or alerts.
– When performing any work on a vehicle, it is good practice to connect it to BUDS2 to
ensure that all needed updates are done.
WARRANTY
Submit a warranty claim using the following information.
NOTE: A fixed amount was added in the campaign
to cover the cost of the shop supply required to
perform the repair.
For claiming procedure, refer to the DEALER/DISTRIBUTOR
WARRANTY GUIDE.
Product Line Ryker
Unit Model Year 2019
Campaign/Bulletin/
Description
10 / 2019-6 / Speed
sensor wiring
Total Labor time paid 0.3 hour
Expiration date
April 30, 2022
SEOCONTENT-END
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| CAN-AM | RYKER | 2019 |
1 Associated Document
Manufacturer Communications
No. 2019-6
February 21, 2019
MC-10194473-0001.pdf 1248.732KB
- Size: Inner diameter: 1/4"| Length: 25 Feet | Color: Black. Our wire loom is made of 100% new and high quality polyethylene
- Our split loom is split and easy to put wires in. Our split loom tubing is thick enough to provide full protection for the wires
- Operating temp (degree F.):-94 to 257 | our split wire loom is used to protect electrical wiring in industry,automotive,home & office
- Our wire loom tubing is resistance to abrasion & harmful chemicals corrosion.Good chemical stability
- Our wire protector tubing is used to wrap wires,and make cables wires neat and orderly
- COMPLETE KIT, NO EXTRA TRIPS : Unlike most pond hoses, every order includes 4 stainless steel clamps
- TRUE KINKPROOF & BURIAL-READY : Corrugated design bends 180° without collapsing. Bury it underground or route around corners. Holds its shape season after season
- EXACT 1" ID, 1-1/4" OD FIT : Inner diameter 1", outer diameter 1-1/4", wall thickness 1/8". Direct fit for most major pond pump brands
- SAFE FORMULA : Made from quality PVC with no harmful coatings. Safe for all aquatic life. UV-resistant and anti-aging for years of outdoor use
- BUILT FOR POND KEEPERS : Whether building a new koi pond or replacing old tubing, Wocloer delivers quality you can count on
- 22mm Aerosol Tubing
- 6 feet long
- Cuffed every 6 inches
- Clear in color
- Pack of 1
- SPECIFICATIONS: DIAMETER(ID): 3/4" | LENGTH: 25FT | COLOR: Black | MATERIAL: Polyethlyene | OPERATING TEMP: - 40°F to +200°F (-40°C to +93°C)
- NONSPLIT: Non-slit design creates a complete barrier around cables, cords, and hoses to provide added protection
- UV RATED: Durable,UV Rated material provides protection from abrasion, heat, chemicals, sunlight, oils, and fluids
- MULTIPLE APPLICATIONS: Versatile and flexible tubing protects and organizes wire harnesses and loose cable bundles in a variety of applications including automotive, telecom, marine, construction, electronics, and home theater
- FLEXIBLE: Flexible tube can be routed through areas like engine bays or around obstructions without being crushed or damaging the cabling inside
- Inner Diameter: 1/2 Inch | Length: 25 Feet | Material: Thick & flame retardant POLYPROPYLENE (PP), raw material for better performance and safety
- Comes with a wire loom insertion tool, makes feeding wires through the split loom so much easier and quicker
- Operating temperature range: -22 °F to 221 °F, ideal for use on automotive, industrial, office and home applications
- Designed with a slit along its length, easy to add or remove cables without the need to disconnect the entire length
- Excellent abrasion, chemical and heat resistance, the wire protector tubing will protect your wires in a variety of harsh environments
This product presentation was made with AAWP plugin.