May 10, 2022 NHTSA CAMPAIGN NUMBER: 22V319000
Improperly Calibrated Front Passenger OCS/FMVSS208
A child in the front seat may be at a greater risk of injury in the event of a passenger air bag deployment during a crash.
NHTSA Campaign Number: 22V319
Manufacturer Rivian
Automotive, LLC
Components SEATS, AIR BAGS
Potential Number of Units Affected 502
Summary
Rivian
Automotive, LLC (Rivian
) is recalling certain 2022 R1T vehicles. The Occupant Classification System (OCS) may not deactivate the air bag when a child or child seat
occupies the front passenger seat. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, “Occupant Crash Protection.”
Remedy
Rivian
Service Centers will replace the front passenger seat, free of charge. Owner notification letters were mailed July 6, 2022. Owners may contact Rivian
customer service at 1-734-855-4345. Rivian
’s number for this recall is FSAM-651.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
RRC-72-22-001-1: Replace 1st Row Passenger Seat Due to Improperly Calibrated Occupant Classification System
Rivian
has decided that certain model year 2022 Rivian
R1T vehicles fail to conform with Federal Motor Vehicle Safety Standard No. 208 “Occupant Crash Protection”. If a child seat
or a child is seated in the front passenger seat, the passenger air bag may not be deactivated as required. In the event of a crash which deploys the front passenger air bag, the infant in the child seat
or child occupant may have an increased risk of injury. Pursuant to its recall determination, Rivian
will replace the front passenger seat in certain model year 2022 R1T vehicles.
Removal and Inspection
1. On the RH side: Remove: Seat Assembly, 1st Row (refer to service manual procedure 681010010).
Note: Raise the seat cushion to maximum height before disabling 12V power.
2. On the removed component(s): Remove: Bin, 1st Row Seat (refer to service manual procedure 683120010).
3. On the removed component(s): Remove: Module, Control, 1st Row Seat (refer to service manual procedure 682410010).
Note: The component(s) will be used in a later step.
4. Compare the highlighted trim on the old and new components.
- If the trim is the same: Skip to the Replacement section.
- If the trim is different: Continue to the next step.
5. On the removed and new component(s): Remove: Headrest, 1st Row Seat (refer to service manual procedure 683110010).
6. Transfer the headrest and rear cover from the removed component to the new component.
Tip: If any clips are damaged, replace them with undamaged clips from the unused rear cover.
Replacement
1. On the new component(s): If necessary: Remove: Bin, 1st Row Seat (refer to service manual procedure 683120010).
2. On the new component(s): Use the ScanKey app to scan the 2D barcode on the label attached to the bottom of the seat.
3. Paste the resulting serial number into the work order.
4. On the new component(s): Install: Module, Control, 1st Row Seat (refer to service manual procedure 682410010).
Note: Reuse the component that was removed in step 3.
5. Install: Bin, 1st Row Seat (refer to service manual procedure 683120010).
Note: Install the bin that was supplied with the new seat. Do not reuse the bin from the removed seat.
6. On the RH side: With an assistant: Install: Seat Assembly, 1st Row (refer to service manual procedure 681010010).
7. Reinstall all components that were removed for access and replace all non-reusable components.
8. Using RiDE: Run the routine for labor code 681010110 – Seat Assembly, 1st Row, Passenger (Remove and Replace).
Chronology :
In March 2022, deviations in the OCS performance were identified in the seat production by Rivian
.
Subsequently, the calibration system was investigated to evaluate root cause.
In late April 2022, MGA Research Corporation provided a report to Rivian
that included test results indicating the passenger air bag may not be deactivated automatically when a suspect seat was tested in accordance with the FMVSS 208 low risk deployment requirement.
In May 2022, Rivian
determined that a potential noncompliance to FMVSS 208, Occupant crash protection cannot be ruled out. As of the date of this filing, Rivian
is not aware of any accidents or injuries related to this issue in any market.
1 Affected Product
10 Associated Documents
Recall Acknowledgement
RCAK-22V319-9345.pdf 645.157KB
Noncompliance Notice 573 Report
RCLRPT-22V319-1723.PDF 214.917KB
Recall 573 Report-Amendment 1-07/05/2022
RCLRPT-22V319-8240.PDF 214.913KB
Remedy Instructions and TSB
RCRIT-22V319-1070.pdf 152.688KB
Part 577 Owner Notification Envelope
RONE-22V319-9697.pdf 104.743KB
Email Owner Notification
RMISC-22V319-6596.pdf 128.473KB
Text Message Owner Notification
RMISC-22V319-9331.pdf 12.682KB
ISSUED Owner Notification Letter(Part 577)
RCONL-22V319-5648.pdf 24.674KB
Recall Quarterly Report #1, 2022-3
RCLQRT-22V319-8097.PDF 211.145KB
Recall Quarterly Report #2, 2022-4
RCLQRT-22V319-4250.PDF 211.248KB
Latest Recalls Documents
- [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note:The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
- [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- OBD2 SCANNER FOR ALL SYSTEMS – The INNOVA SD35 is a tablet-based OBD2 scanner designed for advanced diagnostics. Read and clear check engine light, ABS, SRS, and TPMS codes, plus test your car battery and alternator to prevent unexpected failures. Vehicle coverage may vary. Please use Innova’s Coverage Checker to verify compatibility.
- ALL-SYSTEM DIAGNOSTICS & LIVE DATA – Unlike basic code readers, this OBD2 scanner for all vehicles scans engine, transmission, ABS, SRS, and more. Get real-time live data, including RPM, fuel trims, temperature readings, and oxygen sensor performance.
- OBD2 TABLET WITH USER-FRIENDLY INTERFACE – This automotive scan tool features a high-resolution display, making vehicle diagnostics faster and easier.
- ADVANCED TPMS, OIL RESET & SERVICE FUNCTIONS – Perform TPMS sensor checks, oil light reset, and other service resets with ease This professional diagnostic tool provides comprehensive vehicle maintenance capabilities in one device.
- WIDE VEHICLE COVERAGE (1996 & NEWER CARS & TRUCKS) – This OBD2 scanner Bluetooth tablet is compatible with Toyota
, Ford
, Honda
, Chevrolet
, Nissan
, Dodge
, and more. However, feature coverage may vary. Please use Innova's Coverage Checker to verify coverage.
- 【Reset ABS/SRS/Transmission/Engine Lights】 More than an check engine code reader, OBDMATE OM901 obd2 scanner performs comprehensive diagnostics for the 4 most-used systems (ABS/SRS/Engine/Transmission). It quickly clears fault codes, turns off warning lights, read data stream and auto VIN.
- 【3.5" Handheld Scanner with 4 System Diagnose】 3.5" Super large TFT screen equipped displays an intuitive menu and clear readings of various sensors from ABS, SRS, ECM and TCM systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any batteries or updates required.
- 【One-Click I/M Readines&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether various emissions-related systems on the vehicle are operating properly. Help you get smog-check ready quickly. OM901 car scanner supports all essential OBD2 functions you need: read & clear codes, view freeze frame, read I/M readiness, retrieve VIN, live data stream (with graphing display), O2 sensor test, onboard monitoring mode, and EVAP leak test.
- 【Battery Voltage Check&DLC Pin Test】 It allows you to monitor battery health by testing current battery voltage. Plus, this obd2 diagnostic tool features DLC 16-PIN test to check current voltage of every pin.
- 【Automotive Scanner Diagnostic Kit】 The package comes with 1 car scanner, 1 USB-type c cable, 1 hard storage bag and 1 user manual(en). Free to update without any hidden fees. 5 languanges available in setting including English, French, Italian, German and Espanish. Valuable and Portable, making it a great tool kit for car owners, DIY enthusiasts, and professional mechanics.
- 【Full Systems Automotive Diagnostic】 More than checking engine, ABS and SRS, OBDMATE OM970 obd2 scanner performs comprehensive diagnostics on all electric modules. It quickly scans and clears fault codes, turns off warning lights, reads live data, and features Auto-VIN technology.
- 【Live Datastream&4-in-1 Graph】 Easily view live sensor data such as RPM, fuel trims, ATF temperature, wheel speed sensor, battery voltage and so on. OM970 scan tool also supports 4-in-1 trend graphing. Spend just 3 minutes to check – and you'll know exactly what's going wrong, helping you avoid hundreds in dealership diagnostic fees.
- 【One-Click I/M Readiness&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether your vehicle's emissions-related systems are operating properly. Help you get smog-check ready quickly. OM970 obd2 diagnostic tool supports all essential OBD2 functions you need. Plus, it features battery voltage test and DLC 16-PIN test.
- 【Straightforward Menus with Easy Navigation】 All functions are easy to understand without obscure decriptions. 3.5" Large screen delivers clear readings while keeping one-hand operation. The car diagnostic tool comes with a silicone protective case and a hard-shell carrying case, ensuring long-lived durability and drop resistance.
- 【Budget-Friendly, No Subscriptions, Free Software Updates】 Plug and play: no bluetooth pairing, monthly fees, Wi-Fi connection, or any other troublesome initial settings. OM970 obd2 scanner works out of the box with the latest software. Lifetime free upgrade.
- ✔️【Professional SRS Reset for 1994-2003 BMW
】 Designed specifically for classic BMW
models (1994-2003). This B800 scanner reads & clears SRS airbag fault codes, turns off the warning light, and saves you a costly dealer visit. Confirmed compatible with: E36, E46 (EXCEPT 2001 330i), E34, E38, E39, Z3, and X5 (E53). NOT compatible with any BMW
built before 1994 or after 2003. - ✔️【Important: Two Different Connection Ports – Read Before Use】 To avoid “not working” issues, please note: For 1994–2000 BMWs (most E36, E34, Z3, early E39), the SRS diagnostic port is a round 20-pin connector under the hood. You MUST use the included 16-pin to 20-pin adapter cable. For 2000–2003 models (late E46, E39, X5), use the standard OBD-II port inside the cabin. Incorrect connection is the #1 reason for “incompatibility” reports.
- ✔️【Read & Clear Fault Codes in Minutes】 Quickly diagnose why your SRS light is on. The scanner accurately reads fault codes from airbag and seatbelt pretensioner systems. With one button press, clear the codes and reset the SRS warning light in seconds. No expensive dealer tools needed.
- ✔️【User-Friendly for DIYers – No Mechanic Required】 Easy operation with an intuitive button layout: ‘Enter’ to confirm, ‘Scroll’ to navigate. The clear LCD screen shows results instantly. Includes a step-by-step manual (revised for clarity) to guide you through the entire reset process.
- ✔️【Reliable Support with 1-Year Warranty】 We stand behind the quality of our B800 scanner. It comes with a 1-Year Hassle-Free Warranty. If you have any questions or need support, please contact us with your Order ID, and our dedicated team will assist you promptly.
SEOCONTENT-START
Important Recall Message From Rivian
! Your 2022 R1T is included in NHTSA Recall Number 22V-319. Please call Rivian
Service at 855-748-4265 to schedule your recall appointment immediately. For the time being, you should not seat children 12 and under or use child seats
in the front passenger seat. For more information, please visit https://www.NHTSA.gov/recalls.
**************************************************************************************************************
Rivian
Automotive Hi Jonathan, This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Rivian
has decided that certain model year 2022 Rivian
R1T vehicles fail to conform with Federal Motor Vehicle Safety Standard No. 208 “Occupant Crash Protection.” This notice applies to your vehicle, VIN: %VIN%. What is the problem? If a child seat
or a child is seated in the front passenger seat, the passenger air bag may not be deactivated as required. In the event of a crash which deploys the front passenger air bag, the infant in the child seat
or child occupant may have an increased risk of injury. What will Rivian
do? Your Rivian
Service Center will replace the front passenger seat, free of charge, in your vehicle. What should you do? Please call 1-885-748-4265 to schedule the recall service repair immediately. The estimated recall service time will be approximately 1.5 hours, please plan accordingly. For the time being, you should not seat children 12 and under or use child seats
in the front passenger seat of the vehicle. If you have further questions, please call Rivian
Service at 1- 855-748-4265. Rivian
Automotive Thank you for your attention to this important matter. The quality and safety of your vehicle is of the utmost importance to us. 14600 Myford Rd. Irvine, CA 92606 © 2022 Rivian
| All rights reserved. Help Center | Privacy | Terms | Preferences | View in Browser
**************************************************************************************************************
RRC-72-22-001-1: Replace 1st Row Passenger Seat Due to Improperly Calibrated Occupant Classification System Rivian
has decided that certain model year 2022 Rivian
R1T vehicles fail to conform with Federal Motor Vehicle Safety Standard No. 208 “Occupant Crash Protection”. If a child seat
or a child is seated in the front passenger seat, the passenger air bag may not be deactivated as required. In the event of a crash which deploys the front passenger air bag, the infant in the child seat
or child occupant may have an increased risk of injury. Pursuant to its recall determination, Rivian
will replace the front passenger seat in certain model year 2022 R1T vehicles. Document Type Safety Recall Bulletin Date July 6, 2022 Affected Region(s) USA Affected Model(s) R1T Model Year(s) 2022 Approximate Build Dates Refer to the FSA Dashboard to determine if this document applies to a specific vehicle. 2 Vehicle System Minimum Service Location 72 – Occupant Protection Service Center Required Parts Part Number Quantity Engineering Name Service Name/Notes One of the following: PT00675781- A-001 PT00675781- A-002 PT00675781- A-003 BLKEA-SERVICE ASSY -SEAT-LHD; ROW1; PASS; Heat+Vent; 4WL; Adventure FORBA-SERVICE ASSY -SEAT-LHD; ROW1; PASS; Heat+Vent; 4WL; Adventure OCELA-SERVICE ASSY -SEAT-LHD; ROW1; PASS; Heat+Vent; 4WL; Adventure Seat Assembly, 1st Row, Passenger; Black Mountain and Ebony Ash Seat Assembly, 1st Row, Passenger; Forest Edge and Brown Ash Seat Assembly, 1st Row, Passenger; Ocean Coast and Light Ash Attention: The parts listed in this table are only for unique steps that are called out in this bulletin. Some sections of this bulletin might refer to Service Manual procedures which require additional parts. Always review the bulletin and all potentially related Service Manual procedures before ordering parts and beginning work. RRC-72-22-001-1: Replace 1st Row Passenger Seat Due to Im roperly Calibrated Occupant Classification System, Page 1 Removal and Inspection 1. On the RH side: Remove: Seat Assembly, 1st Row (refer to service manual procedure 681010010). Note: Raise the seat cushion to maximum height before disabling 12V power. 2. On the removed component(s): Remove: Bin, 1st Row Seat (refer to service manual procedure 683120010). 3. On the removed component(s): Remove: Module, Control, 1st Row Seat (refer to service manual procedure 682410010). Note: The component(s) will be used in a later step. 4. Compare the highlighted trim on the old and new components. • If the trim is the same: Skip to the Replacement section. • If the trim is different: Continue to the next step. 5. On the removed and new component(s): Remove: Headrest, 1st Row Seat (refer to service manual procedure 683110010). 6. Transfer the headrest and rear cover from the removed component to the new component. Tip: If any clips are damaged, replace them with undamaged clips from the unused rear cover. Replacement 1. On the new component(s): If necessary: Remove: Bin, 1st Row Seat (refer to service manual procedure 683120010). 2. On the new component(s): Use the ScanKey app to scan the 2D barcode on the label attached to the bottom of the seat. 3. Paste the resulting serial number into the work order. 4. On the new component(s): Install: Module, Control, 1st Row Seat (refer to service manual procedure 682410010). Note: Reuse the component that was removed in step 3. RRC-72-22-001-1: Replace 1st Row Passenger Seat Due to Improperly Calibrated Occupant Classification System, Page 2 5. Install: Bin, 1st Row Seat (refer to service manual procedure 683120010). Note: Install the bin that was supplied with the new seat. Do not reuse the bin from the removed seat. 6. On the RH side: With an assistant: Install: Seat Assembly, 1st Row (refer to service manual procedure 681010010). 7. Reinstall all components that were removed for access and replace all non-reusable components. 8. Using RiDE: Run the routine for labor code 681010110 – Seat Assembly, 1st Row, Passenger (Remove and Replace). Labor Codes Labor Code Description RRC722200100 RRC-72-22-001-1 not applicable RRC722200101 Replace 1st row passenger seat due to improperly calibrated occupant classification system RRC722200102 Replace 1st row passenger seat due to improperly calibrated occupant classification system; transfer headrest and rear cover Contact ServiceDocumentFeedback@rivian
.com regarding labor codes and document content. RRC-72-22-001-1: Replace 1st Row Passenger Seat Due to Improperly Calibrated Occupant Classification System, Page 3
**************************************************************************************************************
Dear This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Rivian
Automotive, LLC has decided that certain model year 2022 Rivian
R1T vehicles fail to conform with Federal Motor Vehicle Safety Standard No. 208 “Occupant Crash Protection.” What is the problem? If a child seat
or a child is seated in the front passenger seat, the passenger air bag may not be deactivated as required. In the event of a crash which deploys the front passenger air bag, the infant in the child seat
or child occupant may have an increased risk of injury. What will Rivian
do? Your Rivian
Mobile Service Technician or Rivian
Service Center will replace the front passenger seat, free of charge, in your vehicle. What should you do? Please call 1-885-748-4265 to schedule the recall service repair immediately. The estimated recall service time will be approximately 1.5 hours, please plan accordingly. For the time being, you should not seat children 12 and under or use child seats
in the front passenger seat of the vehicle. Do you have other questions? If you have further questions, please call Rivian
Service at 1-855-748-4265. For additional information please visit NHTSA.gov/recalls. If you believe that Rivian
has failed or is unable to remedy the defect within a reasonable time or without charge, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue S.E., Washington, D.C. 20590, or call the toll-free Vehicle Safety Hot Line at 1-888-327-4236 (TTY: 1-800-424-9153) or visit www.safercar.gov. Thank you for your attention to this important matter. The quality and safety of your vehicle is of the utmost importance to us. Rivian
IMPORTANT SAFETY RECALL This notice applies to your vehicle, VIN XXXXXXXXXXXXXXXXX 2022 Rivian
R1T Front Passenger Seat OCS NHTSA Recall Number 22V-319 For updated information, please visit NHTSA.gov/recalls 14600 Myford Road | Irvine, California 92606 | 1-855-748-4265
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-319 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Submission Date : Rivian
Automotive, LLC JUL 05, 2022 NHTSA Recall No. : 22V-319 Manufacturer Recall No. : FSAM-651 Manufacturer Information : Manufacturer Name : Rivian
Automotive, LLC Address : 13250 North Haggerty Road PLYMOUTH
MI 48170 Company phone : 999 Population : Number of potentially involved : 473 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2022-2022 Rivian
R1T Vehicle Type : LIGHT VEHICLES Body Style : PICKUP TRUCK Power Train : NR Descriptive Information : Certain 2022 R1T vehicles. The potentially affected vehicle production period began on August 27, 2021, when Rivian
Automotive, LLC (“Rivian
”) started to build vehicles with the suspect seat assemblies and ended on April 18, 2022, when Rivian
stopped building with the suspect seat assemblies. The suspect population was determined using the supplier’s seat manufacturing records, seat calibration data, and Rivian
component traceability information. Similar vehicles not included in this recall received seats with properly calibrated occupant classification systems (“OCS”). Production Dates : AUG 27, 2021 – APR 18, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Noncompliance : Description of the Noncompliance : Rivian
has determined that on certain R1T vehicles, the calibration of the OCS for the front passenger seat might not meet current production specifications. This condition may result in a noncompliance with FMVSS 208, Occupant crash protection. FMVSS 1 : 208 – Occupant crash protection FMVSS 2 : NR Description of the Safety Risk : If a child seat
or a child is seated in the front passenger seat, the passenger air bag might not be deactivated as required. In the event of a crash which Part 573 Safety Recall Report 22V-319 Page 2 deploys the front passenger air bag, the infant in the child seat
or child occupant may have an increased risk of injury. Description of the Cause : Due to a defect during supplier manufacturing of the seat, the calibration of the OCS does not perform consistently. Identification of Any Warning that can Occur : The customer may be made aware of the status of the passenger restraint system by the illumination, or lack thereof, of the PASSENGER AIRBAG OFF lamp in the lower corner of the center display. In some circumstances, the passenger seat belt notification may chime when the seat is empty. Involved Components : Component Name 1 : SEAT Component Description : LHD; ROW1; PASS; VENT; 4WL Component Part Number : C100030805-C500030805, PT00030805 Supplier Identification : Component Manufacturer Name : Hyundai
Transys Michigan, LLC Address : 27555 Executive Dr. Suite 155 Farmington Hills Michigan 48331 Country : United States Chronology : In March 2022, deviations in the OCS performance were identified in the seat production by Rivian
. Subsequently, the calibration system was investigated to evaluate root cause. In late April 2022, MGA Research Corporation provided a report to Rivian
that included test results indicating the passenger air bag may not be deactivated automatically when a suspect seat was tested in accordance with the FMVSS 208 low risk deployment requirement. In May 2022, Rivian
determined that a potential noncompliance to FMVSS 208, Occupant crash protection cannot be ruled out. As of the date of this filing, Rivian
is not aware of any accidents or injuries related to this issue in any market. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 22V-319 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Description of Remedy : Description of Remedy Program : Rivian
will replace the passenger seat in the affected vehicles free of charge. Rivian
is committed to reimbursing owners for previous out-of-pocket repairs according to the plan submitted to the agency on May 10, 2022; however, the OCS and passenger seat for the vehicles affected by this recall are covered under Rivian
’s 5 year/60,000 miles new vehicle limited warranty. Rivian
only began releasing vehicles to customers at the end of 2021. As no owners of these vehicles would have reached the end of the warranty period and therefore not incurred expenses for the warranted repair as a result of this condition, no notification regarding reimbursement under section 577.11 is necessary. Rivian
has a policy and practice of reimbursing owners who have paid for a repair that subsequently becomes the subject of a field action. To ensure consistency, Rivian
, as part of the owner letter, will request that customers send the original receipt and/or other adequate proof of payment to the company for confirmation of the expense. How Remedy Component Differs from Recalled Component : Identify How/When Recall Condition was Corrected in Production : The remedy component will be a passenger seat assembly that was properly built and calibrated. NR Recall Schedule : Description of Recall Schedule : Rivian
will begin notifying affected customers not to seat children or use child seats
in the passenger seat of the affected vehicles via e-mails, texts, and in vehicle messaging on the center display as soon as possible. Rivian
will mail notifications on or before July 1, 2022. As a direct-to-consumer manufacturer, Rivian
owns and operates all of the Company’s sales and service operations. As all “dealers” are Rivian
owned entities, notification will be through internal means to our licensed store and service operations addressing this recall on or before the date set forth in this response. Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : JUL 01, 2022 – JUL 01, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-319 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Submission Date : Rivian
Automotive, LLC, d.b.a Rivian
MAY 10, 2022 NHTSA Recall No. : 22V-319 Manufacturer Recall No. : FSAM-651 Manufacturer Information : Manufacturer Name : Rivian
Automotive, LLC, d.b.a Rivian
Address : 13250 North Haggerty Road PLYMOUTH
MI 48170 Company phone : 999 Population : Number of potentially involved : 502 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2022-2022 Rivian
R1T Vehicle Type : LIGHT VEHICLES Body Style : PICKUP TRUCK Power Train : NR Descriptive Information : Certain 2022 R1T vehicles. The potentially affected vehicle production period began on September 21, 2021, when Rivian
Automotive, LLC (“Rivian
”) started to build vehicles with the suspect seat assemblies and ended on April 12, 2022, when Rivian
stopped building with the suspect seat assemblies. The suspect population was determined using the supplier’s seat manufacturing records, seat calibration data, and Rivian
component traceability information. Similar vehicles not included in this recall received seats with properly calibrated occupant classification systems (“OCS”). Production Dates : SEP 21, 2021 – APR 12, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Noncompliance : Description of the Noncompliance : Rivian
has determined that on certain R1T vehicles, the calibration of the OCS for the front passenger seat might not meet current production specifications. This condition may result in a noncompliance with FMVSS 208, Occupant crash protection. FMVSS 1 : 208 – Occupant crash protection FMVSS 2 : NR Description of the Safety Risk : If a child seat
or a child is seated in the front passenger seat, the passenger air bag might not be deactivated as required. In the event of a crash which Part 573 Safety Recall Report 22V-319 Page 2 deploys the front passenger air bag, the infant in the child seat
or child occupant may have an increased risk of injury. Description of the Cause : Due to a defect during supplier manufacturing of the seat, the calibration of the OCS does not perform consistently. Identification of Any Warning that can Occur : The customer may be made aware of the status of the passenger restraint system by the illumination, or lack thereof, of the PASSENGER AIRBAG OFF lamp in the lower corner of the center display. In some circumstances, the passenger seat belt notification may chime when the seat is empty. Involved Components : Component Name 1 : SEAT Component Description : LHD; ROW1; PASS; VENT; 4WL Component Part Number : C100030805-C500030805, PT00030805 Supplier Identification : Component Manufacturer Name : Hyundai
Transys Michigan, LLC Address : 27555 Executive Dr. Suite 155 Farmington Hills Michigan 48331 Country : United States Chronology : In March 2022, deviations in the OCS performance were identified in the seat production by Rivian
. Subsequently, the calibration system was investigated to evaluate root cause. In late April 2022, MGA Research Corporation provided a report to Rivian
that included test results indicating the passenger air bag may not be deactivated automatically when a suspect seat was tested in accordance with the FMVSS 208 low risk deployment requirement. In May 2022, Rivian
determined that a potential noncompliance to FMVSS 208, Occupant crash protection cannot be ruled out. As of the date of this filing, Rivian is not aware of any accidents or injuries related to this issue in any market. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 22V-319 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Description of Remedy : Description of Remedy Program : Rivian will replace the passenger seat in the affected vehicles free of charge. Rivian is committed to reimbursing owners for previous out-of-pocket repairs according to the plan submitted to the agency on May 10, 2022; however, the OCS and passenger seat for the vehicles affected by this recall are covered under Rivian’s 5 year/60,000 miles new vehicle limited warranty. Rivian only began releasing vehicles to customers at the end of 2021. As no owners of these vehicles would have reached the end of the warranty period and therefore not incurred expenses for the warranted repair as a result of this condition, no notification regarding reimbursement under section 577.11 is necessary. Rivian has a policy and practice of reimbursing owners who have paid for a repair that subsequently becomes the subject of a field action. To ensure consistency, Rivian, as part of the owner letter, will request that customers send the original receipt and/or other adequate proof of payment to the company for confirmation of the expense. How Remedy Component Differs from Recalled Component : Identify How/When Recall Condition was Corrected in Production : The remedy component will be a passenger seat assembly that was properly built and calibrated. NR Recall Schedule : Description of Recall Schedule : Rivian will begin notifying affected customers not to seat children or use child seats
in the passenger seat of the affected vehicles via e-mails, texts, and in vehicle messaging on the center display as soon as possible. Rivian will mail notifications on or before July 1, 2022. As a direct-to-consumer manufacturer, Rivian owns and operates all of the Company’s sales and service operations. As all “dealers” are Rivian owned entities, notification will be through internal means to our licensed store and service operations addressing this recall on or before the date set forth in this response. Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : JUL 01, 2022 – JUL 01, 2022 * NR – Not Reported
SEOCONTENT-END
This product presentation was made with AAWP plugin.





