May 13, 2022 NHTSA CAMPAIGN NUMBER: 22E038000
Fuel pump failure can cause an engine stall, increasing the risk of a crash.
NHTSA Campaign Number: 22E038
Manufacturer Plastic Omnium
Components FUEL SYSTEM, GASOLINE
Potential Number of Units Affected 41,409
Summary
Plastic Omnium (Plastic Omnium) has submitted a Defect Information Report based upon the recall determinations made by Nissan
North America, Inc. (recall 21V-957), and Mitsubishi Motors North America, Inc. (recall 22V-027). The fuel tank assemblies contain a fuel pump that may fail.
Remedy
The affected vehicle manufacturers will determine the appropriate remedy for their vehicles and mail owner notification letters. Nissan owners can contact Nissan customer service at 1-800-867-7669. Mitsubishi owners can contact MMNA customer service at 1-888-648-7820.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
December 9th, 2021: Nissan North America Inc filed a Part 573 defect information report identifying a defect in certain Nissan Rogue Vehicles. (See Recall No. 21V-957)
Feb 3rd, 2022: Mitsubishi Motors North America Inc filed a Part 573 defect information report identifying a defect in certain Mitsubishi Outlander Vehicles. (See Recall No. 22V-027)
March – April, 2022 – NHTSA contacted Plastic Omnium in regards to the above recalls. Plastic Omnium contacted the OEM’s in regards to the recalls and worked with NHTSA to obtain information requested.
May 1st, 2022: Based on NHTSA’s request and the two recall reports submitted by two vehicle manufacturers Nissan and Mitsubishi, Plastic Omnium agreed to submit a defect information report under 49 CFR 573.3(f) due to the safety-related defect determinations made by its customers, Nissan and Mitsubishi, concerning the component from TI Automotive. Plastic Omnium’s understanding is that Nissan and Mitsubishi are working directly with TI Automotive on any defects related to this concern.
1 Affected Product
Equipment
| BRAND | PART NO. | PRODUCTION DATES |
| PLASTIC OMNIUM | FUEL TANK ASSEMBLY | |
3 Associated Documents
Defect Notice 573 Report
RCLRPT-22E038-6106.PDF 219.558KB
Recall Acknowledgement
RCAK-22E038-1908.pdf 645.911KB
Recall 573 Report – 5/18/2022
RCLRPT-22E038-8363.PDF 219.633KB
Latest Recalls Documents
- Dual Dial For Accurate Reading, With A 140 PSI /10 Bar Scale
- Deluxe Manometer Fuel Injection Pressure Tester Gauge Kit
- Set comes in a specially designed molded case to make storage easy and organized.
- A time saving quick coupler connection at the end of he gauge hose makes a speedy and efficient couple possible with most adapters.
- The included adapters, hoses and fittings cover all fuel injection systems and most cars and trucks world wide!
- Compatibility Note: For further confirmation of specific model compatibility, refer to the vehicle owner's manual or contact a professional technician. Excludes Fo/rd, K/I/A, Bo/s/ch, C/I/S Je/tro/nic, G//M Th/rot/tle Bo/dy Systems, A/cu/ra, J/ee/p, B/M/W, Ni/s/san, and To/yo/ta fuel systems. Not compatible with small/non/standard S/chra/der vallves, high/pre/ssure direct in/ject/ed engines, or die//sel injection pumps. Verify your vehicle’s vallve size and pressure specs before purchase
- Wide Compatibility: This fuel pressure tester kit comes with multiple adapters for most gasoline engines in trucks, cars, motorcycles and RVs. But not compatible with diesel high - pressure injection pumps or direct injection engines
- Accurate Testing: The fuel pressure tester features high - precision sensors for accurate measurement of fuel system pressure changes. Measures range 0-140PSI/ 0-10bar dual color coded scale to diagnose fuel supply and injection issues
- Multipurpose Use: The 8 inches hose fits all M6 fuel pressure test ports. The 15 inches hose connects snugly to any 1/4" standard schrader valve. The M8, M10, M12, and M14 adapters make sure this tool kit can be used on most cars and vehicles
- Corrosion Resistance: Crafted from high - strength materials, the fuel pressure tester offers excellent corrosion and impact resistance. It ensures long - term stability and reliability even in harsh working conditions
- ACCURATE DUAL-SCALE GAUGE: Features a shock-resistant dry gauge with built-in damping mechanism, providing clear 0–140 PSI and 0–10 BAR dual scales for precise fuel system diagnostics
- DURABLE CONSTRUCTION: Built with OEM-grade brass, aluminum, and steel components for long-lasting performance in tough environments
- COMPLETE ADAPTER SET: Includes 8 adapters (M6 to M14) and two hoses with quick-release valve for easy and safe testing on various fuel ports
- USER-FRIENDLY & SAFE: Comes with relief valve and drain hose for safe fuel recovery; always follow included safety guidelines for optimal use
- COMPATIBILITY NOTICE: This tester fits most gasoline engines in vehicles. But it will NOT FIT vehicles with Bosch, CIS Jetronic, GM TBI, or Direct Injection systems. Check Your Model as it may not fit certain Ford, KIA, Acura, Jeep, BMW, Nissan, and Toyota models that use small or non-standard Schrader valves. We strongly recommend verifying your vehicle's specifications to guarantee a perfect fit.
- Universal Design: The included adapters, hoses and fittings cover most fuel injection systems and Gas Engine Cars, Motorcycles, Trucks, SUVs, ATVs, UTVs, RVs. (Does not compatible with Bosch, CIS Jetronic, TB System on GM vehicles, 2012 Dodge 5.7L, 1999 GNMC Sonoma 4.3). Please verify your vehicle's vallve size and pressure specs before purchase
- Ideal For Mechanics: Fuel Injection Pump Pressure / Oil Combustion Spraying Pressure Gauge Teste
- Durable: Designed for repeated use with high quality materials
- Convenient and Safe Design: Fuel pressure tester with a quick release valve button could offer single-handed operation inflation and deflation
- Measuring Range: 0-140psi (0-10 bar)
- 45-PIECE WIDE COVERAGE: From multi-point to throttle body injection, this 45-piece adapter kit covers virtually all American, Asian and European gasoline cars, trucks and SUVs; solves the frustration of missing the right fitting mid-job, letting you diagnose more vehicles with one comprehensive case.
- FLUORESCENT GLOW DIAL: The 0-140 PSI (0-10 Bar) dual-scale gauge face absorbs workshop light and glows in dark engine bays, so you can read pressure clearly without holding a flashlight. The armored rubber boot withstands drops and vibration, keeping the precise movement safe in daily use.
- LABELED ORGANIZED CASE: Each adapter slot in the rugged, shockproof case is printed with the exact size and thread spec—find the right fitting in seconds and never lose a piece. Keeps all 45 components clean, protected, and job-site ready for mobile mechanics and garage storage.
- LEAK-FREE QUICK CONNECTS: Includes tees, quick couplers, extension hose and transparent relief hose for real-time pressure testing and safe fuel recovery. The gauge also features a built-in hang hook, freeing your hands for other tasks—designed to meet the demands of both professional auto shops and passionate DIYers.
- GASOLINE SYSTEM COMPATIBILITY: This kit measures low-pressure systems (0-140 PSI) and fits most gasoline cars, pickups and SUVs. Important note: it will NOT work on diesel engines, GDI/FSI high-pressure direct injection systems (2000+ PSI), or the high-pressure side of hybrid vehicles. Please verify your vehicle’s fuel system type before purchase.
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-038
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Plastic Omnium
Submission Date : MAY 18, 2022
NHTSA Recall No. : 22E-038
Manufacturer Recall No. : NR
Manufacturer Information :
Manufacturer Name : Plastic Omnium
Address : 2710 Bellingham Dr
Troy MI 48083
Company phone : 7347413492
Population :
Number of potentially involved : 41,409
Estimated percentage with defect : 1 %
Equipment Information :
Brand / Trade 1 : Fuel Tank Assembly
Model : FWD ORVR
Part No. : 17201 6RE0B
Size : NR
Function : NR
Descriptive Information : Plastic Omnium makes this submission at NHTSA’s request based on the recall of
vehicles by Nissan North America, Inc. (21V957) and Mitsubishi Motors North
America, Inc. (22V027) that were equipped with Plastic Omnium fuel systems
(P/Ns 172016RE0B, 172016RE1B, 1700B771V, and 1700B773V) that
incorporated TI Automotive fuel-pump modules (P/Ns 1760A634, 1760A6341,
17040 6RE0A, and 17040 6RE1A). As explained by Nissan and Mitsubishi, the
fuel-pump modules may have been subject to an inappropriate manufacturing
process at TI Automotive. Plastic Omnium only supplied fuel systems with the
suspect fuel-pump modules to Nissan and Mitsubishi. Each fuel system part
number is specifically designed for each OEM (Nissan/Mitsubishi) and is not
shipped to other OEM’s.
The total number of potentially affected parts specified herein is the number of
fuel systems incorporating the suspect fuel-pump modules that Plastic Omnium
supplied to the recalling vehicle manufacturers and that were manufactured
within the identified production ranges.
The information provided herein is based on information available to Plastic
Omnium at the time of the submission and may not include all information
available to the vehicle manufacturers.
Production Dates : OCT 16, 2020 – MAY 21, 2021
Part 573 Safety Recall Report 22E-038 Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Brand / Trade 2 : Fuel Tank Assembly
Model : AWD
Part No. : 1700B773V
Size : NR
Function : NR
Descriptive Information : Plastic Omnium makes this submission at NHTSA’s request based on the recall of
vehicles by Nissan North America, Inc. (21V957) and Mitsubishi Motors North
America, Inc. (22V027) that were equipped with Plastic Omnium fuel systems
(P/Ns 172016RE0B, 172016RE1B, 1700B771V, and 1700B773V) that
incorporated TI Automotive fuel-pump modules (P/Ns 1760A634, 1760A6341,
17040 6RE0A, and 17040 6RE1A). As explained by Nissan and Mitsubishi, the
fuel-pump modules may have been subject to an inappropriate manufacturing
process at TI Automotive. Plastic Omnium only supplied fuel systems with the
suspect fuel-pump modules to Nissan and Mitsubishi. Each fuel system part
number is specifically designed for each OEM (Nissan/Mitsubishi) and is not
shipped to other OEM’s.
The total number of potentially affected parts specified herein is the number of
fuel systems incorporating the suspect fuel-pump modules that Plastic Omnium
supplied to the recalling vehicle manufacturers and that were manufactured
within the identified production ranges.
The information provided herein is based on information available to Plastic
Omnium at the time of the submission and may not include all information
available to the vehicle manufacturers.
Production Dates : FEB 08, 2021 – OCT 12, 2021
Part 573 Safety Recall Report 22E-038 Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Brand / Trade 3 : Fuel Tank Assembly
Model : FWD
Part No. : 1700B771V
Size : NR
Function : NR
Descriptive Information : Plastic Omnium makes this submission at NHTSA’s request based on the recall of
vehicles by Nissan North America, Inc. (21V957) and Mitsubishi Motors North
America, Inc. (22V027) that were equipped with Plastic Omnium fuel systems
(P/Ns 172016RE0B, 172016RE1B, 1700B771V, and 1700B773V) that
incorporated TI Automotive fuel-pump modules (P/Ns 1760A634, 1760A6341,
17040 6RE0A, and 17040 6RE1A). As explained by Nissan and Mitsubishi, the
fuel-pump modules may have been subject to an inappropriate manufacturing
process at TI Automotive. Plastic Omnium only supplied fuel systems with the
suspect fuel-pump modules to Nissan and Mitsubishi. Each fuel system part
number is specifically designed for each OEM (Nissan/Mitsubishi) and is not
shipped to other OEM’s.
The total number of potentially affected parts specified herein is the number of
fuel systems incorporating the suspect fuel-pump modules that Plastic Omnium
supplied to the recalling vehicle manufacturers and that were manufactured
within the identified production ranges.
The information provided herein is based on information available to Plastic
Omnium at the time of the submission and may not include all information
available to the vehicle manufacturers.
Production Dates : FEB 28, 2021 – OCT 12, 2021
Part 573 Safety Recall Report 22E-038 Page 4
The information contained in this report was submitted pursuant to 49 CFR §573
Brand / Trade 4 : Fuel Tank Assembly
Model : AWD ORVR
Part No. : 17201 6RE1B
Size : NR
Function : NR
Descriptive Information : Plastic Omnium makes this submission at NHTSA’s request based on the recall of
vehicles by Nissan North America, Inc. (21V957) and Mitsubishi Motors North
America, Inc. (22V027) that were equipped with Plastic Omnium fuel systems
(P/Ns 172016RE0B, 172016RE1B, 1700B771V, and 1700B773V) that
incorporated TI Automotive fuel-pump modules (P/Ns 1760A634, 1760A6341,
17040 6RE0A, and 17040 6RE1A). As explained by Nissan and Mitsubishi, the
fuel-pump modules may have been subject to an inappropriate manufacturing
process at TI Automotive. Plastic Omnium only supplied fuel systems with the
suspect fuel-pump modules to Nissan and Mitsubishi. Each fuel system part
number is specifically designed for each OEM (Nissan/Mitsubishi) and is not
shipped to other OEM’s.
The total number of potentially affected parts specified herein is the number of
fuel systems incorporating the suspect fuel-pump modules that Plastic Omnium
supplied to the recalling vehicle manufacturers and that were manufactured
within the identified production ranges.
The information provided herein is based on information available to Plastic
Omnium at the time of the submission and may not include all information
available to the vehicle manufacturers.
Production Dates : OCT 16, 2020 – MAY 21, 2021
Description of Defect :
Description of the Defect : As stated by Nissan and Mitsubishi in 21V957 and 22V027, due to
inappropriate manufacturing process at the supplier, the commutator
and wires in the fuel pump may not be fused correctly during production,
resulting in poor continuity. As a result, the commutator and the brushes in the
fuel pump could wear abnormally in use, causing the fuel pump to be
inoperative. If this occurs, the engine may stall while driving or cannot be
started.
FMVSS 1 : NR
FMVSS 2 : NR
Description of the Safety Risk : As stated by Nissan and Mitsubishi in 21V957 and 22V027, if the fuel pump
does not operate, the engine may stall while driving, which
increases risk of a crash
Description of the Cause : Reference Nissan Recall Report 21V-957
Reference Mitsubishi Recall Report 22V-027
Part 573 Safety Recall Report 22E-038 Page 5
The information contained in this report was submitted pursuant to 49 CFR §573
Identification of Any Warning
that can Occur :
Reference Nissan Recall Report 21V-957
Reference Mitsubishi Recall Report 22V 027
Involved Components :
Component Name : Fuel Pump Module
Component Description : Fuel Pump (2WD)
Component Part Number : 1760A634
Component Name : Fuel Pump Module
Component Description : Fuel Pump (4WD)
Component Part Number : 1760A631
Component Name : Fuel Pump Module
Component Description : Fuel Pump (2WD)
Component Part Number : 17040 6RE0A
Component Name : Fuel Pump Module
Component Description : Fuel Pump (4WD)
Component Part Number : 17040 6RE1A
Supplier Identification :
Component Manufacturer
Name : TI Automotive Japan Gunma Ltd.
Address : 1-23-1 Kunisadacho
Isesaki-shi Gunma-ken Foreign States 379-221
Country : Japan
Chronology :
Part 573 Safety Recall Report 22E-038 Page 6
The information contained in this report was submitted pursuant to 49 CFR §573
December 9th, 2021: Nissan North America Inc filed a Part 573 defect information report identifying a defect
in certain Nissan Rogue Vehicles. (See Recall No. 21V-957)
Feb 3rd, 2022: Mitsubishi Motors North America Inc filed a Part 573 defect information report identifying a
defect in certain Mitsubishi Outlander Vehicles. (See Recall No. 22V-027)
March – April, 2022 – NHTSA contacted Plastic Omnium in regards to the above recalls. Plastic Omnium
contacted the OEM’s in regards to the recalls and worked with NHTSA to obtain information requested.
May 1st, 2022: Based on NHTSA’s request and the two recall reports submitted by two vehicle manufacturers
Nissan and Mitsubishi, Plastic Omnium agreed to submit a defect information report under 49 CFR 573.3(f) due
to the safety-related defect determinations made by its customers, Nissan and Mitsubishi, concerning the
component from TI Automotive. Plastic Omnium’s understanding is that Nissan and Mitsubishi are working
directly with TI Automotive on any defects related to this concern.
Description of Remedy :
Description of Remedy Program : Because Nissan and Mitsubishi are recalling the subject component, any
notice, remedy, and recall-completion reporting would be completed by
the vehicle manufacturers for their respective recalls. Please refer to
Nissan Recall Report No. 21V-957 and Mitsubishi Recall Report No.
22V-027.
How Remedy Component Differs
from Recalled Component :
NR
Identify How/When Recall Condition
was Corrected in Production :
NR
Recall Schedule :
Description of Recall Schedule : Recall Schedule and notification to be managed by Nissan and Mitsubishi.
Reference Nissan Recall report 21V-957 and Mitsubishi Recall report
22V-027
Planned Dealer Notification Date : NR – NR
Planned Owner Notification Date : NR – NR
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or
installation in new motor vehicles or new items of motor vehicle equipment:
Part 573 Safety Recall Report 22E-038 Page 7
The information contained in this report was submitted pursuant to 49 CFR §573
Name : Nissan Motor Co
Address : NR
Kyushu 00
Country : JP
Company Phone : NR
Name : Mitsubishi Motors
Address : NR
00
Country : JP
Company Phone : NR
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-038
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Plastic Omnium
Submission Date : MAY 13, 2022
NHTSA Recall No. : 22E-038
Manufacturer Recall No. : NR
Manufacturer Information :
Manufacturer Name : Plastic Omnium
Address : 2710 Bellingham Dr
Troy MI 48083
Company phone : 7347413492
Population :
Number of potentially involved : 41,409
Estimated percentage with defect : 1 %
Equipment Information :
Brand / Trade 1 : Fuel Tank Assembly
Model : FWD ORVR
Part No. : 17201 6RE0B
Size : NR
Function : NR
Descriptive Information : Plastic Omnium makes this submission at NHTSA’s request based on the recall of
vehicles by Nissan North America, Inc. (21V957) and Mitsubishi Motors North
America, Inc. (22V027) that were equipped with Plastic Omnium fuel systems
(P/Ns 172016RE0B, 172016RE1B, 1700B771V, and 1700B773V) that
incorporated TI Automotive fuel-pump modules (P/Ns 1760A634, 1760A6341,
17040 6RE0A, and 17040 6RE1A). As explained by Nissan and Mitsubishi, the
fuel-pump modules may have been subject to an inappropriate manufacturing
process at TI Automotive. Plastic Omnium only supplied fuel systems with the
suspect fuel-pump modules to Nissan and Mitsubishi. Each fuel system part
number is specifically designed for each OEM (Nissan/Mitsubishi) and is not
shipped to other OEM’s.
The total number of potentially affected parts specified herein is the number of
fuel systems incorporating the suspect fuel-pump modules that Plastic Omnium
supplied to the recalling vehicle manufacturers and that were manufactured
within the identified production ranges.
The information provided herein is based on information available to Plastic
Omnium at the time of the submission and may not include all information
available to the vehicle manufacturers.
Production Dates : OCT 16, 2020 – MAY 21, 2021
Part 573 Safety Recall Report 22E-038 Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Brand / Trade 2 : Fuel Tank Assembly
Model : AWD ORVR
Part No. : 17201 6RE1B
Size : NR
Function : NR
Descriptive Information : Plastic Omnium makes this submission at NHTSA’s request based on the recall of
vehicles by Nissan North America, Inc. (21V957) and Mitsubishi Motors North
America, Inc. (22V027) that were equipped with Plastic Omnium fuel systems
(P/Ns 172016RE0B, 172016RE1B, 1700B771V, and 1700B773V) that
incorporated TI Automotive fuel-pump modules (P/Ns 1760A634, 1760A6341,
17040 6RE0A, and 17040 6RE1A). As explained by Nissan and Mitsubishi, the
fuel-pump modules may have been subject to an inappropriate manufacturing
process at TI Automotive. Plastic Omnium only supplied fuel systems with the
suspect fuel-pump modules to Nissan and Mitsubishi. Each fuel system part
number is specifically designed for each OEM (Nissan/Mitsubishi) and is not
shipped to other OEM’s.
The total number of potentially affected parts specified herein is the number of
fuel systems incorporating the suspect fuel-pump modules that Plastic Omnium
supplied to the recalling vehicle manufacturers and that were manufactured
within the identified production ranges.
The information provided herein is based on information available to Plastic
Omnium at the time of the submission and may not include all information
available to the vehicle manufacturers.
Production Dates : OCT 16, 2020 – MAY 21, 2021
Part 573 Safety Recall Report 22E-038 Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Brand / Trade 3 : Fuel Tank Assembly
Model : FWD
Part No. : 1700B771V
Size : NR
Function : NR
Descriptive Information : Plastic Omnium makes this submission at NHTSA’s request based on the recall of
vehicles by Nissan North America, Inc. (21V957) and Mitsubishi Motors North
America, Inc. (22V027) that were equipped with Plastic Omnium fuel systems
(P/Ns 172016RE0B, 172016RE1B, 1700B771V, and 1700B773V) that
incorporated TI Automotive fuel-pump modules (P/Ns 1760A634, 1760A6341,
17040 6RE0A, and 17040 6RE1A). As explained by Nissan and Mitsubishi, the
fuel-pump modules may have been subject to an inappropriate manufacturing
process at TI Automotive. Plastic Omnium only supplied fuel systems with the
suspect fuel-pump modules to Nissan and Mitsubishi. Each fuel system part
number is specifically designed for each OEM (Nissan/Mitsubishi) and is not
shipped to other OEM’s.
The total number of potentially affected parts specified herein is the number of
fuel systems incorporating the suspect fuel-pump modules that Plastic Omnium
supplied to the recalling vehicle manufacturers and that were manufactured
within the identified production ranges.
The information provided herein is based on information available to Plastic
Omnium at the time of the submission and may not include all information
available to the vehicle manufacturers.
Production Dates : FEB 28, 2021 – OCT 12, 2021
Part 573 Safety Recall Report 22E-038 Page 4
The information contained in this report was submitted pursuant to 49 CFR §573
Brand / Trade 4 : Fuel Tank Assembly
Model : AWD
Part No. : 1700B773V
Size : NR
Function : NR
Descriptive Information : Plastic Omnium makes this submission at NHTSA’s request based on the recall of
vehicles by Nissan North America, Inc. (21V957) and Mitsubishi Motors North
America, Inc. (22V027) that were equipped with Plastic Omnium fuel systems
(P/Ns 172016RE0B, 172016RE1B, 1700B771V, and 1700B773V) that
incorporated TI Automotive fuel-pump modules (P/Ns 1760A634, 1760A6341,
17040 6RE0A, and 17040 6RE1A). As explained by Nissan and Mitsubishi, the
fuel-pump modules may have been subject to an inappropriate manufacturing
process at TI Automotive. Plastic Omnium only supplied fuel systems with the
suspect fuel-pump modules to Nissan and Mitsubishi. Each fuel system part
number is specifically designed for each OEM (Nissan/Mitsubishi) and is not
shipped to other OEM’s.
The total number of potentially affected parts specified herein is the number of
fuel systems incorporating the suspect fuel-pump modules that Plastic Omnium
supplied to the recalling vehicle manufacturers and that were manufactured
within the identified production ranges.
The information provided herein is based on information available to Plastic
Omnium at the time of the submission and may not include all information
available to the vehicle manufacturers.
Production Dates : FEB 08, 2021 – OCT 12, 2021
Description of Defect :
Description of the Defect : As stated by Nissan and Mitsubishi in 21V957 and 22V027, due to
inappropriate manufacturing process at the supplier, the commutator
and wires in the fuel pump may not be fused correctly during production,
resulting in poor continuity. As a result, the commutator and the brushes in the
fuel pump could wear abnormally in use, causing the fuel pump to be
inoperative. If this occurs, the engine may stall while driving or cannot be
started.
FMVSS 1 : NR
FMVSS 2 : NR
Description of the Safety Risk : As stated by Nissan and Mitsubishi in 21V957 and 22V027, if the fuel pump
does not operate, the engine may stall while driving, which
increases risk of a crash
Description of the Cause : Reference Nissan Recall Report 21V-957
Reference Mitsubishi Recall Report 22V-027
Part 573 Safety Recall Report 22E-038 Page 5
The information contained in this report was submitted pursuant to 49 CFR §573
Identification of Any Warning
that can Occur :
Reference Nissan Recall Report 21V-957
Reference Mitsubishi Recall Report 22V 027
Involved Components :
Component Name : Fuel Pump Module
Component Description : Fuel Pump (2WD)
Component Part Number : 1760A634
Component Name : Fuel Pump Module
Component Description : Fuel Pump (4WD)
Component Part Number : 1760A631
Component Name : Fuel Pump Module
Component Description : Fuel Pump (2WD)
Component Part Number : 17040 6RE0A
Component Name : Fuel Pump Module
Component Description : Fuel Pump (4WD)
Component Part Number : 17040 6RE1A
Supplier Identification :
Component Manufacturer
Name : TI Automotive Japan Gunma Ltd.
Address : 1-23-1 Kunisadacho
Isesaki-shi Gunma-ken Foreign States 379-221
Country : Japan
Chronology :
Part 573 Safety Recall Report 22E-038 Page 6
The information contained in this report was submitted pursuant to 49 CFR §573
December 9th, 2021: Nissan North America Inc filed a Part 573 defect information report identifying a defect
in certain Nissan Rogue Vehicles. (See Recall No. 21V-957)
Feb 3rd, 2022: Mitsubishi Motors North America Inc filed a Part 573 defect information report identifying a
defect in certain Mitsubishi Outlander Vehicles. (See Recall No. 22V-027)
March – April, 2022 – NHTSA contacted Plastic Omnium in regards to the above recalls. Plastic Omnium
contacted the OEM’s in regards to the recalls and worked with NHTSA to obtain information requested.
May 1st, 2022: Based on NHTSA’s request and the two recall reports submitted by two vehicle manufacturers
Nissan and Mitsubishi, Plastic Omnium agreed to submit a defect information report under 49 CFR 573.3(f) due
to the safety-related defect determinations made by its customers, Nissan and Mitsubishi, concerning the
component from TI Automotive. Plastic Omnium’s understanding is that Nissan and Mitsubishi are working
directly with TI Automotive on any defects related to this concern.
Description of Remedy :
Description of Remedy Program : Nissan and Mitsubishi will be determining remedy. Reference Nissan
Recall report 21V-957 and Mitsubishi Recall report 22V-027
How Remedy Component Differs
from Recalled Component :
NR
Identify How/When Recall Condition
was Corrected in Production :
NR
Recall Schedule :
Description of Recall Schedule : Recall Schedule and notification to be managed by Nissan and Mitsubishi.
Reference Nissan Recall report 21V-957 and Mitsubishi Recall report
22V-027
Planned Dealer Notification Date : NR – NR
Planned Owner Notification Date : NR – NR
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or
installation in new motor vehicles or new items of motor vehicle equipment:
Part 573 Safety Recall Report 22E-038 Page 7
The information contained in this report was submitted pursuant to 49 CFR §573
Name : Mitsubishi Motors
Address : NR
00
Country : JP
Company Phone : NR
Name : Nissan Motor Co
Address : NR
Kyushu 00
Country : JP
Company Phone : NR
* NR – Not Reported
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.