Wheel Lock-Up From Improperly Tightened Spokes – 2012-2017 Ural Motorcycles

June 16, 2022 NHTSA CAMPAIGN NUMBER: 22V431000

Wheel Lock-Up From Improperly Tightened Spokes

Damaged rims or a wheel lock-up can increase the risk of a crash.

 

NHTSA Campaign Number: 22V431

Manufacturer Irbit Motorworks of America, Inc.

Components WHEELS

Potential Number of Units Affected 3,250

 

Summary

Irbit Motorworks of America, Inc. (Irbit) is recalling certain 2012-2017 Ural Gear Up, Ural Patrol (T), Ural Retro, 2012-2015 Ural Tourist (T), and 2015-2017 Ural cT motorcycles. The wheel spokes may have been improperly tightened, which can damage the rims or cause a wheel lock-up.

 

Remedy

Dealers will replace the wheel rims, spokes, tubes, and rim strips, free of charge. Owner notification letters were mailed August 17, 2022. Owners may contact Irbit customer service at 1-425-702-8484. This recall excludes wheel rims previously replaced by warranty and/or under NHTSA Recall No. 13V-507.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Chronology :

After being contacted by the NHTSA in regard to additional complaints of cracked and/or defective wheel rims we opened a full investigation into claim history and documented complaints that were outside the scope of our original recall. Upon review it was determined that a potential defect may exist for all wheel rims provided by our supplier ComStart and assembled between 9/15/2011 and 10/3/2017.

 


25 Affected Products

Vehicles

MAKEMODELYEAR
URALCT2015-2017
URALGEAR-UP2012-2017
URALPATROL-T2012-2017
URALRETRO2012-2017
URALTOURIST-T2012-2015

 


6 Associated Documents

Recall Acknowledgement

RCAK-22V431-1966.pdf 645.917KB

 


Defect Notice 573 Report

RCLRPT-22V431-2523.PDF 217.543KB

 


Manufacturer Notices(to Dealers,etc)

RCMN-22V431-9623.pdf 31.6KB

 


Recall Quarterly Report #1, 2022-3

RCLQRT-22V431-9400.PDF 211.143KB

 


Recall Quarterly Report #2, 2022-4

RCLQRT-22V431-6867.PDF 211.254KB

 


Recall Quarterly Report #3, 2023-1

RCLQRT-22V431-0099.PDF 211.337KB

 


Latest Recalls Documents

 


 

Bestseller No. 1
Alrhso 12pcs 290mm/11.4inch Stainless Steel Spokes Mountain Bike/Road Bike Steel 14G Spokes Black with 12mm Nipples
  • Complete Set: Includes 12 high-quality 14G bicycle spokes and 12 durable 12mm brass spoke nipples, suitable for complete wheel replacement or repair.
  • Premium Material: Made of high-quality 304 stainless steel with a black electroplated surface, offering excellent rust resistance and long-lasting durability.
  • Precise Dimensions: 290mm length, 2.0mm diameter (14G), with a J-bend design to ensure a secure connection to the hub.
  • Compatibility: Compatible with most mountain bikes, road bikes, and standard bicycle wheels – please measure your existing spokes before ordering.
  • Stability: These professional-grade bike spokes offer excellent toughness and impact resistance, enhancing wheel stability and load-bearing capacity.
Bestseller No. 2
Meuey Lyot 12 Pack 14G Bike Spokes, 10.2 Inch Stainless Steel with Nipples
  • The bicycle spoke is made of stainless steel, durable, with fine workmanship, environmental protection, surface plating, rust prevention, corrosion resistance, long service life and other advantages.
  • 14G mountain bike spoke, spoke diameter :2 mm, spoke measurement standard: distance from the inner wall of the bend to the top of the other end.
  • The stainless steel spokes of the bicycle have good toughness and impact resistance, reducing the impact resistance of the wheels, their race durability, and improving the vibration load capacity.
  • The road bike 14G spoke kit includes enough spokes and spoke caps to freshen up your bike and look like new.
  • Model :14G spoke. Spoke length: 260 mm /10.2 in. The length of the bicycle spokes depends on your rim, hub, and your braiding method. So we have no suggestion on this, you can measure your old spokes first, please confirm before placing an order.
Bestseller No. 3
A ABSOPRO 12 Set 14G Bicycle Spokes 265mm Bike Wheel Spokes Silver Tone
  • Spoke Specifications: Spoke Thread Size: 14G; Spoke Material: 304 Stainless Steel; Spoke Color: Silver Tone; Spoke Diameter: 2mm / 0.08"; Spoke Elbow Diameter: 4mm / 0.16"; Spoke Length(without Elbow): 265mm / 10.43"; Spoke Nipple Thread Size: 14G; Spoke Nipple Material: Copper; Spoke Nipple Diameter: 6mm / 0.24"; Spoke Nipple Length: 12mm / 0.47"
  • Universal Fit: The bicycle spoke is suitable for bicycle wheels, like common bikes, mountain bikes, city bikes, etc. The spokes have good toughness and impact resistance, which reduces the impact resistance of the wheels. Updates your bike spokes and makes your bicycle look like a new one.
  • Durable Material: The spokes are made of 304 Stainless Steel, which has good toughness and impact resistance, thereby reducing the impact resistance of the wheel.
  • Easy Installation: When installing, the two adjacent spokes on the wheel drum are mounted in the first and third holes in the same direction on the rim (two spokes spaced one hole). The length of bicycle spokes depends on the rim, hub, and braiding method. Please measure the old spokes and confirm the size before placing an order. To match the alignment of your wheel, you can take a photo before installation.
  • Package List: 12 Pcs Bike Wheel Spokes; 12 Pcs Bike Spoke Nipples
SaleBestseller No. 4
bskkw 16PCS 295mm 14G J Bend Bicycle Spokes with Nipples, Black Steel Replacement Spokes for Mountain Bike MTB Road Bike Wheel Building and Repair
3 Reviews
bskkw 16PCS 295mm 14G J Bend Bicycle Spokes with Nipples, Black Steel Replacement Spokes for Mountain Bike MTB Road Bike Wheel Building and Repair
  • Package Including: You will receive 16pcs 295mm 14g j bend bicycle spokes with nipples, Spoke Length(without Elbow): 295mm/ 11.61inch, Elbow Head Diameter: 3.8mm/ 0.15inch, Spoke Shaft Diameter: 14G (2mm/ 0.08inch), Nipples Size: 12mmx6mm/ 0.47inchx0.24inch(H*D).
  • Professional Grade Construction: These 14G J bend bicycle spokes with nipples feature precision-rolled threads that ensure smooth installation and secure engagement. The steel replacement spokes maintain consistent tension across mountain bike MTB road bike wheels, providing reliable performance for both professional wheel building and home repair projects.
  • Universal Compatibility Design: Engineered to work with standard hub flanges and rim eyelets across multiple bicycle types. These steel replacement spokes accommodate various wheel building patterns for mountain bike MTB road bike applications, making them suitable for front and rear wheel configurations.
  • Consistent Tension Performance: Uniform gauge throughout length ensures even stress distribution across the wheel structure. These steel replacement spokes for mountain bike MTB road bike maintain proper wheel trueness and roundness under varying loads, reducing the need for frequent adjustments after initial wheel building and repair completion.
  • Workshop Ready Quality: Pre-checked threading and bend angles minimize installation complications during wheel service. The 14G J bend bicycle spokes with nipples arrive ready for immediate use in professional shops or home workshops, supporting efficient wheel building and repair workflows without requiring additional preparation or modifications.
Bestseller No. 5
Goucrro Bike Spokes 12G 2.5mm E-Bike Tricycle Wheel 20pcs(Black, 12G-260mm)
  • HIGH QUALITY MATERIALS - Bicycle spokes are made of high quality #45 steel, which is strong and can withstand all kinds of complicated road conditions to ensure long-term use
  • MULTIPLE SIZES AVAILABLE - 12G bicycle spokes are available in lengths from 70mm to 300mm, please choose the size that fits your bike. Spoke color: Black/Silver; Spoke diameter: 2.5 mm; Nut length 12 mm
  • UNIVERSAL - 20pcs black steel spokes + nuts, easy to install, these professional spokes are universal for all bikes, such as electric bicycle, mountain bikes, road bikes, folding bikes, wheelchairs, etc. Replacement/repairable wheel spokes
  • NOTE- spoke length depends on your rim, hub and the weaving style. Therefore we have no recommendation on this, you can measure your old spokes first, please confirm before placing an order
  • PROFESSIONAL CRAFTSMANSHIP - Professional precision machining and adjustments ensure that each spoke has good toughness and impact resistance, improving the balance and stability of the wheel

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...