Trailer Brakes May Not Activate – 2020-2022 Coachmen Catalina, & 2021-2022 Forest River Aurora Travel Trailers

July 6, 2022 NHTSA CAMPAIGN NUMBER: 22V477000

Trailer Brakes May Not Activate

Trailer brakes that fail to activate can increase the risk of a crash.

 

NHTSA Campaign Number: 22V477

Manufacturer Forest RivereBay logo, Inc.

Components ELECTRICAL SYSTEM

Potential Number of Units Affected 12,141

 

Summary

Forest RivereBay logo, Inc. (Forest RivereBay logo) is recalling certain 2020-2022 Coachmen Catalina, and 2021-2022 Forest RivereBay logo Aurora travel trailers. The breakaway switch may be incorrectly wired to the battery disconnect, which can prevent the trailer brakes from activating as intended.

 

Remedy

Dealers will inspect and re-wire the breakaway switch, as necessary, free of charge. Owner notification letters were mailed August 2, 2022. Owners may contact Forest RivereBay logo customer service at 1-574-825-6241. Forest RivereBay logo’s number for this recall is 51-1529.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


RECALL 22V477, 2022-358 REMEDY INSTRUCTIONS

Make(s): CATALINA & AURORA
Model(s): SEE BELOW
Model Year(s): 2020, 2021 & 2022
Repair Code: RC-003-22-00-004205
Allotted Time: .30 HRS.
Inspection Code: RC-003-05-00-004204
Allotted Time: .10 HRS
Concern:
THE BATTERY/HOUSE AND THE BREAKAWAY WIRING IS INCORRECT ON THE BATTERY DISCONNECT.
Photo(s) Required: YES
Prior Authorization Required: NO
Part(s) Kit Number: N/A
Part(s) Return: N/A

 

Disconnect the vehicles’ battery Positive and Negative, disconnect any House battery(s) Positive and Negative, if equipped with a generator ensure it is off and lastly, ensure the vehicle is disconnected from shore power. Block any tires/wheels to prevent the vehicle from rolling. Failure to do so may result in electrocution, fire or other personal injury, property damage and/or death.

 

CERTAIN 2020 THROUGH 2022 CATALINA AND AURORA TRAVEL TRAILER RECREATIONAL VEHICLES.

STEP 1: LOCATE AND REMOVE SCREWS HOLDING THE BATTERY DISCONNECT FROM THE FRAME (FIG. 1);

STEP 2: CUT AN ACCESS HOLE ROUGHLY 12” X 12” DIRECTLY BEHIND THE FRONT CROSS MEMBER AND BATTERY DISCONNECT. SET 12” X 12” UNDERBELLY ASIDE FOR LATER USE. THIS WILL GIVE YOU ACCESS TO THE JUNCTION BOX AND AUTO-RESET MINIeBay logo BREAKERS (FIG. 2);

STEP 3: LOCATE THE MINIeBay logo-BREAKER ON THE FAR RIGHT WITH THE SOLID BLACK WIRE CONNECTED TO THE TOP STUD OF THE MINIeBay logo-BREAKER. LOOSEN AND REMOVE NUT FROM THE MINIeBay logo-BREAKER STUD AND PULL THE BLACK WIRE OFF THE STUD OF THE MINIeBay logo-BREAKER;

STEP 4: LOCATE THE CRIMPED ON EYELET ON THE BLACK WIRE, SNIP OFF THE EYELET. STRIP THE BLACK WIRE AND CRIMP ON A 3/8” EYELET. (EYELET SHALL BE OF THE CORRECT SIZE TO FIT THE BATTERY DISCONNECT LUG);

STEP 5: LOOSEN AND REMOVE THE NUT FROM STUD ON THE BATTERY DISCONNECT THAT IS ASSOCIATED WITH THE CONSTANT POWER. CONNECT THE BLACK WIRE FROM THE BREAKAWAY SWITCH TO THE STUD CONNECTED DIRECTLY TO THE BATTERY (FIG. 3);

STEP 6: TIGHTEN NUT DOWN ONTO THE STUD;

STEP 7: REATTACH THE BATTERY DISCONNECT TO THE FRONT CROSS MEMBER. USE THE SAME FOUR (4) HOLES TO REMOUNT THE DISCONNECT. TAKE GREAT CARE TO NOT SNAP OR STRIP THE SCREWS.
TAKE CARE TO NOT OVER TIGHTEN THE BATTERY DISCONNECT EXCESSIVE TORQUE MAY RESULT IN A BROKEN BATTERY DISCONNECT HOUSING.

NOTE: BREAKAGE AS A RESULT OF REINSTALLING THE BATTERY DISCONNECT IS NOT COVERED UNDER THIS RECALL. YOUR DEALERSHIP WILL BE RESPONSIBLE FOR REPLACING THE BATTERY DISCONNECT AT NO CHARGE TO THE OWNER. THIS PART MAY BE ORDERED FROM CATALINA SEPARATELY, AS/IF NEEDED.

STEP 8: TEST CIRCUIT WITH DISCONNECT IN THE “OFF” POSITION TO ENSURE IT IS IN WORKING ORDER.

STEP 9: USE BLACK TAPE SUCH AS GORILLA TAPE TO SECURE THE 12” X 12” UNDERBELLY PANEL BACK TO THE VEHICLE. ENSURE THE PATCH IS PRESENTABLE TO THE CUSTOMER. THIS WILL ALSO HELP IF IN THE FUTURE THE CUSTOMER OR A DEALER NEEDS TO ACCESS THE CONNECTIONS FOR THE 7 WAY CORD.

 


This notice is sent to you in accordance with the requirements Motor Vehicle Safety Act. This notice is also sent in accordance with the requirements of the United States’ National Traffic and Motor Vehicle Safety Act. Forest RivereBay logo has decided that a defect, which relates to the motor vehicle safety, exists in certain 2020 – 2022 Coachmen Catalina and 2021 – 2022 Forest RivereBay logo Aurora travel trailer recreational vehicles. This is to inform you that your vehicle may contain a defect that could affect the safety of a person.

 

WHAT IS THE DEFECT/NONCOMPLIANCE?

The breakaway switch wire was connected to a minieBay logo-breaker that was connected to the auxiliary side of the battery disconnect. By the breakaway switch being wired to the auxiliary side of the battery disconnect, it is not supplying constant power to the switch, therefore, the switch may not engage when needed and consequently not allow the trailer brakes to activate.

 

EVALUATION OF THE RISK TO THE VEHICLE AND OPERATOR(S) RELATED TO THE RECALL.

If battery disconnect is in the “off” position, the breakaway switch will not engage when needed, the trailer brakes will not activate which may lead to a crash.

 

WHAT IS FOREST RIVEReBay logo AND OUR DEALERSHIPS GOING TO DO?

Forest RivereBay logo is notifying dealerships of the recall. An authorized Forest RivereBay logo Dealer or Service Center will need to perform the remedy, which will include inspecting the wiring to the breakaway switch rewire if needed so that the breakaway switch will activate properly. It is preferable if you have your selling dealership perform the remedy. Forest RivereBay logo completely covers your cost for the remedy; you will not receive any bill of sale for anything covered under the above recall number.

 

WHAT SHOULD YOU DO?

Please contact your dealer immediately and request a service appointment to schedule the free remedy. The vehicle Owner is responsible for arranging to have the work completed. Please state you have been notified by Forest RivereBay logo of having a recall in process for your vehicle and provide the recall number for the dealership. It is also helpful to the dealership to have a copy of this letter when you take your vehicle in for the recall remedy. You may also visit www.forestriverinc.com for dealer locations.

 

HOW LONG WILL THE REMEDY PROCESS TAKE?

The estimated time of repair is .30 hours. However, the dealership may need to keep your vehicle or schedule an appointment with you for a later date to fit into their regular service schedule.

 

WHAT IF YOU HAVE PREVIOUSLY PAID FOR REPAIRS TO YOUR VEHICLE FOR THIS PARTICULAR CONDITION?

If you have already paid for a repair that is within the scope of this defect under recall, you still need to have this recall inspected and/or performed to ensure the correct parts and procedures were utilized. Additionally, you may be eligible for a refund of previously paid repairs. Refunds will only be provided for within the scope of this defect under recall.

Please send the service invoice to the following address:

Catalina & Aurora
Forest RivereBay logo, Inc.
Attn: WARRANTY MANAGER
PO Box 30
Middlebury, IN 46540

 


Chronology :

On June 24, 2022, during a routine Codes & Standards Audit, it was discovered that the breakaway switch was incorrectly wired. Forest Rivers Office of Corporate Compliance was notified by the manufacturing plant of the issue and began to determine the vehicle scope.

 


5 Affected Products

Vehicles

MAKEMODELYEAR
COACHMENCATALINA2020-2022
FOREST RIVEReBay logoAURORA2021-2022

 


8 Associated Documents

Recall 573 Report

RCLRPT-22V477-1670.PDF 214.852KB

 


Recall Acknowledgement

RCAK-22V477-8312.pdf 645.865KB

 


ISSUED Owner Notification Letter(Part 577)

RCONL-22V477-8373.pdf 173.635KB

 


Remedy Instructions and TSB

RCRIT-22V477-9239.pdf 210.157KB

 


Manufacturer Notices(to Dealers,etc)

RCMN-22V477-6475.pdf 203.655KB

 


Recall Quarterly Report #1, 2022-3

RCLQRT-22V477-7639.PDF 211.128KB

 


Recall Quarterly Report #2, 2022-4

RCLQRT-22V477-9093.PDF 211.237KB

 


Recall Quarterly Report #3, 2023-1

RCLQRT-22V477-5342.PDF 211.319KB

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V477&docType=RCL

 


 

Bestseller No. 1
VEVOR Electric Trailer Brake Assembly, 12" x 2", 2 Pairs Self-Adjusting Electric Brakes Kit for 7000 lbs Axle, 5-Hole Mounting, Backing Plates for Braking System Part Replacement (2 Right + 2 Left)
  • Self-Adjusting Electric Brake: Say goodbye to manual adjustments! Dive into the world of 12" x 2" electric trailer brake assemblies that self-adjust. It's not just smart; it's efficient and gives your trailer that smooth braking touch.
  • Hassle-Free Installation: DIY's best friend! Our electric trailer brake is straightforward and a breeze to install. It's ready to install right out of the box and boasts high compatibility. Wherever you are, installation is just a few steps away.
  • Built for the Long Haul: Keep on rolling! With a lifespan of up to 30,000 kilometers, these trailer brakes are in it for the long haul, designed for your trailer's daily adventures. Constructed from premium materials, our brakes promise robust durability and resistance to wear and tear.
  • Versatility at Its Best: The trailer brake kit has a broad range of applications, including towing trailers, transporting goods, camping trips, and more. It's compatible with DextereBay logo, AL-KO (a brand under the former), and other trailer axles.
  • Top-Notch Packaging: When it comes to packaging, we don't just box; we care. Our trailer electric brake kit is packaged above industry standards. Every brake is meticulously checked and wrapped to ensure what you get is nothing short of perfect.
Bestseller No. 2
Trailer Axle Electric Brake Kit, Pair of 5-Hole, 4.5" Bolt Circle Brake Drum with 10" x 2 1/4" Self-Adjusting Electric Brakes for 3500 lb Axles, Replacement 10”(not for 4400lb) Brake Hub Drum Assembly
  • Premium Material: This brake drum is made of high-quality iron and uses electroplating technology to protect the drum body, enabling it to work normally in various environments. At the same time, the brake drum is resistant to rust and corrosion, greatly extending the service life of the product.
  • About The Drum and Self-Adjusting Electric Brakes: Classic design and rich production experience make the brake drum more excellent response, in a variety of harsh environments can achieve a short period of emergency braking, so that your journey is safer. It’s designed for 3500 lb Axles.
  • Package Including: 2*brake drum 5 hole, 4.5" bolt, 2*Bearing inner ring replace for L68149( I.D:1.377", O.D:2.164"), 2*Bearing inner ring replace for L44649(I.D:1.062", O.D:2.058"), 2*grease seal(I.D: 1.718" O.D: 2.56" height: 0.5" ), 2*dust cover(Mounting diameter:1.988"), 2*rubber plug dust cover(Mounting diameter:1.988"), 10*hub nut(1/2-20 UNF-2B), 1*left electric brake, 1*right electric brake, 8*spring washer, 8*nut, 2* hexagon slotted nut, 2*flat washer, 2* cotter pin.
  • Suit for: Pair of trailer 5 on 4.5" hub drum kits and 10" x 2 1/4" electric adjusting brakes fit for DextereBay logo and other brands 3500lbs trailer axle. Fits 1-1/16'' to 1-3/8'' spindles 3,500 pounds trailer. Not fit for 1-1/16" Straight spindle and 1" Straight spindle.
  • After Sale Service: High quality assurance! And we provide after-sales service policy. If you have any problems, please contact us first, we will try our best to solve your problem.
Bestseller No. 3
VEVOR Electric Trailer Brake Assembly, 10" x 2-1/4", 2 Pairs Self-Adjusting Electric Brakes Kit for 3500 lbs Axle, 4-Hole Mounting, Backing Plates for Brake System Part Replacement (2 Right + 2 Left)
  • Self-Adjusting Electric Brake: Say goodbye to manual adjustments! Dive into the world of 10" x 2-1/4" electric trailer brake assemblies that self-adjust. It's not just smart; it's efficient and gives your trailer that smooth braking touch.
  • Hassle-Free Installation: DIY's best friend! Our electric trailer brake is straightforward and a breeze to install. It's ready to install right out of the box and boasts high compatibility. Wherever you are, installation is just a few steps away.
  • Built for the Long Haul: Keep on rolling! With a lifespan of up to 30,000 kilometers, these trailer brakes are in it for the long haul, designed for your trailer's daily adventures. Constructed from premium materials, our brakes promise robust durability and resistance to wear and tear.
  • Versatility at Its Best: The trailer brake kit has a broad range of applications, including towing trailers, transporting goods, camping trips, and more. It's compatible with DextereBay logo, AL-KO (a brand under the former), and other trailer axles.
  • Top-Notch Packaging: When it comes to packaging, we don't just box; we care. Our trailer electric brake kit is packaged above industry standards. Every brake is meticulously checked and wrapped to ensure what you get is nothing short of perfect.
Bestseller No. 4
4Pcs 10" x 2-1/4" Electric Trailer Brake Assemblies for 3,500lbs, Left and Right
  • Compatible with: Fit For Alko/ for DextereBay logo/ for Quality, and other brands 3,500lbs trailer axle. Brake flange PCD: 4", Brake Flange Spacing between adjacent bolts: 2-7/8 inches. (Note: Not compatible with the 4400lbs axle)
  • Kit Includes: 2x 10" x 2-1/4" left electric brake assemblies, 2x 10" x 2-1/4" right electric brake assemblies, 16x spring pad, 16x nut
  • Function: good braking performance allows you to stop steadily in all road conditions.
  • Product Introduction: The AEagle electronic brake features non-asbestos brake linings for superior friction performance, ensuring longevity and enhanced braking capabilities.
  • Quality Assurance: 12-month warranty! Tested before shipping.
Bestseller No. 5
2Pcs 10" x 2-1/4" Electric Trailer Brake Assemblies for 3,500lbs to 4000lbs, Left and Right
  • Compatible with: Fit For Alko/ for DextereBay logo/ for Quality, and other brands 3,500lbs trailer axle; Brake flange PCD: 4", Brake Flange Spacing between adjacent bolts: 2-7/8 inches (Note: Not compatible with the 4400lbs axle)
  • Kit Includes: 1x 10" x 2.25" left electric brake assemblies, 1x 10" x 2.25" right electric brake assemblies, 8x spring pad, 8x nut
  • Function: good braking performance allows you to stop steadily in all road conditions.
  • Product Introduction: The AEagle electronic brake features non-asbestos brake linings for superior friction performance, ensuring longevity and enhanced braking capabilities.
  • Quality Assurance: 12-month warranty! Tested before shipping.

Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API


 

 


 

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...