August 26, 2022 NHTSA CAMPAIGN NUMBER: 22V643000
Incorrect Axle Rating on Federal Placard
An incorrect axle rating can result in the vehicle being overloaded, causing a loss of vehicle control and increasing the risk of a crash.
NHTSA Campaign Number: 22V643
Manufacturer Forest River
, Inc.
Components EQUIPMENT
Potential Number of Units Affected 6
Summary
Forest River
, Inc. (Forest River
) is recalling certain 2023 Rockwood and Flagstaff fifth wheels. The Federal Placard states an axle rating of 5,200 lbs, when the correct axle rating is 5,000 lbs.
Remedy
Dealers will replace the Federal Placards, free of charge. Dealers were notified August 26, 2022. Owners may contact Forest River
customer service at 1-574-642-8943. Forest River
’s number for this recall is 10-1549.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
Manufacturing personnel discovered this on August 19, 2022, by an audit of the new models’ Federal Placards.
On August 26, 2022 Forest Rivers Corporate Recall Committee voted to recall
2 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| FOREST RIVER | FLAGSTAFF | 2023 |
| FOREST RIVER | ROCKWOOD | 2023 |
5 Associated Documents
Recall Acknowledgement
Remedy Instructions and TSB
RCRIT-22V643-5562.pdf 693.231KB
Noncompliance Notice 573 Report
RCLRPT-22V643-5936.PDF 236.888KB
Manufacturer Notices(to Dealers,etc)
Recall Quarterly Report #1, 2022-3
RCLQRT-22V643-1394.PDF 211.121KB
Latest Recalls Documents
- 89" Hubface 74" Spring Center / 5x4.5 Bolt Pattern | Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
- Internal Components: 3.5k (3500 lb Capacity) Bearing Kit, 3.5k TK Axle Hub - 5 lug Brake, 3.5k TK Axle Beam - 3.5k Tube, 3.5k TK Axle Studs - 1/2"
- How to Measure Your Idler Trailer Axle - Hubface: Measure from one face of hub (where the studs start coming out of hub) to the face of hub on opposite side. Spring Center: Measure from center of one spring seat, to the center of spring seat on opposite side (see image in gallery for more details).
- High Strength Straight Steel Axle Tube Construction - Ensures even tire wear and a better highway experience | Underslung - Axle is welded with spring seats on the bottom. Allows for lower ride height. For optimal usage, use with double eye springs. | EZ Lube Design - Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
- Replaces Dexter
, AL-KO, Hayes
, and Lippert
Axles. Design for use on Light Duty Trailers: Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Motorcycle, BBQ Pit, Cargo, Enclosed, RV & More
- Compatibility. Trailer axle kit for 3,500lb cargo trailer, 73" hubface - 58" spring center(reference from P2), impressive support to wheels and shock absorbent for RV camper
, pack with spring, U-bolt, hanger and shackle kit for replacement.1 - Trailer Axle Parts Oulet. Maximum distance between spring center is 18'', between hubface is 14'', 5 bolt on 4.5 pattern trailer hub, replace the axle with prominent steel-made, provide better support to thefor 3500 lbs cargo trailer.
- Trailer Leaf Spring. Confirm the measurement for sure fit, eye to eye length: 25-1/4 inch; free open: 3 inch; width of leaf: 1-3/4 inch; 4 leaves; 9/16 inch bushing dia, OEM reference: SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184.
- Includes. Tandem trailer leaf spring kit included compatible 4 U-bolts feature 5-1/2'' long, 1/2'' dia, 2 tie plates and 8 hex nuts, 4 hangers, 4pcs 3-1/8" shackle straps and necessary locknuts and shackle bolts for one package easy replacement.
- Durability. Trailer axle springs constructed with prominent steel with anti-corrosion coating, DOT qualified hardware and accessories improve the suspension system for long time and long distance journey in years.
- 73" Hubface 58" Spring Center / 5x4.5 Bolt Pattern | Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
- Internal Components: 3.5k (3500 lb Capacity) Bearing Kit, 3.5k TK Axle Hub - 5 lug Brake, 3.5k TK Axle Beam - 3.5k Tube, 3.5k TK Axle Studs - 1/2"
- How to Measure Your Idler Trailer Axle - Hubface: Measure from one face of hub (where the studs start coming out of hub) to the face of hub on opposite side. Spring Center: Measure from center of one spring seat, to the center of spring seat on opposite side (see image in gallery for more details).
- High Strength Straight Steel Axle Tube Construction - Ensures even tire wear and a better highway experience | Underslung - Axle is welded with spring seats on the bottom. Allows for lower ride height. For optimal usage, use with double eye springs. | EZ Lube Design - Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
- Replaces Dexter
, AL-KO, Hayes
, and Lippert
Axles. Design for use on Light Duty Trailers: Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Motorcycle, BBQ Pit, Cargo, Enclosed, RV & More
- 73" Hubface: Measure from one face of hub (where the studs start coming out of hub) to the face of hub on opposite side
- 58" Spring Center: Measure from center of one spring seat, to the center of spring seat on opposite side
- Package include: 3500 lbs Trailer Axle with 5-Lug 4.5'' Hubs
- Widely used: Suitable for all light trailers, including trailer axle, boat trailer axle, car trailer axle, ATV trailer axle, lawn and landscape trailer axle, motorcycle trailer axle, cargo trailer axle, enclosed trailer axle, RV trailer axle, etc
- Any questions after receiving Trailer Axle Kit , please contact us freely
- 85" Hubface 70" Spring Center / 5x4.5 Bolt Pattern | Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
- Internal Components: 3.5k (3500 lb Capacity) Bearing Kit, 3.5k TK Axle Hub - 5 lug Brake, 3.5k TK Axle Beam - 3.5k Tube, 3.5k TK Axle Studs - 1/2"
- How to Measure Your Idler Trailer Axle - Hubface: Measure from one face of hub (where the studs start coming out of hub) to the face of hub on opposite side. Spring Center: Measure from center of one spring seat, to the center of spring seat on opposite side (see image in gallery for more details).
- High Strength Straight Steel Axle Tube Construction - Ensures even tire wear and a better highway experience | Underslung - Axle is welded with spring seats on the bottom. Allows for lower ride height. For optimal usage, use with double eye springs. | EZ Lube Design - Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
- Replaces Dexter
, AL-KO, Hayes
, and Lippert
Axles. Design for use on Light Duty Trailers: Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Motorcycle, BBQ Pit, Cargo, Enclosed, RV & More
Last update on 2026-05-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
IMPORTANT SAFETY RECALL Page 1 of 2 August 26, 2022 Pursuant to USC49CFR ยง577.13 โ Notification to Dealerships and Distributors โ Paragraph B โIt is a violation of Federal Law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by the notification under a sale or lease until the defect or noncompliance is remedied. Substantial civil penalties apply to violations of this law.โ โForest River
motorized and towable products are contained in this section- CANADA: Pursuant to the Canadian Motor Vehicle Safety Act, section 5 Companies who sell new non-complying vehicles may be in violation of the Motor Vehicle Safety Act. Substantial penalties apply to violations of this law. This notice is being sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This is to inform you that your vehicle may contain a defect that could affect the safety of a person. This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This notice is also sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Forest River
has decided that a noncompliance, which relates to the motor vehicle safety, exists in certain 2023 Rockwood RLF2892WS and Flagstaff FLF529RWS Fifth Wheel recreational vehicles and fail to comply with the requirements of Federal Motor Vehicle Safety Standard 49 CFR Part 567 โCertification.” Additionally, this non-compliance fails to meet the requirements of Canadian Motor Vehicle Safety Regulations; Part 567 โCertification.” The identified VIN referenced in the attached document(s). The designated Date range of production is 7/29/2022 through 8/4/2022 WHAT IS THE DEFECT/NONCOMPLIANCE? The Federal Placard indicates that the axle(s) have a rating of 5,200 lbs. each, whereas the correct rating is 5,000 lbs. each. EVALUATION OF THE RISK TO THE VEHICLE AND OPERATOR(S) RELATED TO THE RECALL. An operator may overload the vehicle, which may lead to loss of vehicle control and potentially lead to a crash. Dealer Service Procedure Federal Placard Installation: ๏ The labels are located on the road side of the unit, low on the sidewall or on the upper deck on the same side and on the entry door; ๏ Wipe off the labels with isopropyl alcohol; ๏ Match the labels and carefully place the new labels directly on top of the old labels DEALER REPAIR CODES: Dealer Connect UNITED STATES CANADA REPAIR CODE DESCRIPTION ALLOWABLE HOUR(S) 22V643 N/A RC-002-01-00-004229 INSTALL FEDERAL PLACARD .10 HRS HELPFUL CONTACT INFORMATION: CONTACT PHONE CUSTOMER SERVICE (574) 642-8943 [email protected] [email protected] DEPARTMENT OF COMPLIANCE VEHICLE SAFETY AND RECALL MANAGEMENT BUILDING 11 423 N MAIN ST MIDDLEBURY, INDIANA 46540-9218 NHTSA RECALL: 22V643 CANADA RECALL: N/A FR ID: 10-1549 <> <
SEOCONTENT-END



