October 7, 2022 NHTSA CAMPAIGN NUMBER: 22V748000
Extended Brake Pedal May Contact Dash Panel
Brake failure can increase the risk of a crash.
NHTSA Campaign Number: 22V748
Manufacturer Newmar
Corporation
Components SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected 32
Summary
Newmar
Corporation (Newmar
) is recalling certain 2023 Dutch Star motorhomes. The adjustable brake pedal may come into contact with the dash panel, resulting in unintentional brake engagement, which can cause the brakes to overheat and fail.
Remedy
Dealers will trim the dash panel to add more clearance at the brake pedal and dash panel, free of charge. Owner notification letters were mailed on November 1, 2022. Owners may contact Newmar
’s customer service at 1-800-731-8300.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
RSB 590
November 01, 2022
NHTSA #22V 748
TC #2022-569
RECALL SERVICE BULLETIN
AFFECTED MODELS
2023 :: Dutch Star
DESCRIPTION
The dash interferes with full extension of the brake pedal assembly.
ISSUE
Newmar
Corporation has decided that a defect, which relates to motor vehicle safety, exists in specific motorhomes built on Freightliner
and Spartan Chassis.
On certain Newmar
motorhomes, when the adjustable brake pedal is fully extended towards the driver, it may contact the dash panel. This can cause the brakes to partially be applied. Continuing to drive with the brakes partially applied may cause the brakes to overheat and cause a brake failure.
UNITS AFFECTED
Please refer to the attached population list for affected units and VINs.
CORRECTIVE ACTION
Follow the attached work instructions to trim the plastic dash panel.
PARTS NEEDED
FLAT RATE CODE:
22V 748
LABOR TIME:
.5 hr.
DEALER ACTION
Contact your Newmar
Service Account Manager to obtain authorization and order part(s).
CUSTOMER ACTION
Contact the Newmar
brand specialist immediately at 1-800-731-8300. An associate will assist you in making an appointment to have this repair completed.
IMPORTANT: Please read this bulletin in its entirety prior to beginning any diagnosis or repairs.
NOTICE: Any technical information published in this bulletin is intended for use only by a qualified, Newmar
-authorized service technician. Newmar
is not responsible for the misuse of this information.
Work Instructions for Bulletin 590 :: Brake Pedal/Dash Clearance Issue
- Measure and mark the dash cut, or print the attached template, and cut out the upper and lower template for a pattern to mark the dash cut.
- Using an air saw or a similar cutting device, cut slowly along the marks made in the previous step, making sure no wires are in the path of the blade. If you try to cut too fast, you may melt the plastic back together.
- After cutting, use 80 grit sandpaper to de-bur the cut plastic on the dash, and discard the plastic piece that was removed.
- Add a piece of foam tape to the back side of the dash in line with the brake pedal arm. This will eliminate dash rattling if the pedal arm is still close while driving with the pedal assembly fully extended.
Chronology :
Newmar
Corporation is reporting this recall following the notification from a dealer on 9/12/22 that a driver delivering a unit noticed brake pedal catching the dash panel when it was extended towards him in the driver seat. This was causing the brakes to drag on the motorhome.
On 9/13/22 Newmar
production tested the brake pedal by extending it out completely towards the driver and noticed the interference with the dash panel.
On 9/14/22 the Newmar
Warranty Reduction team was notified of the problem to start working on a review of the issue and next steps to be taken.
On 9/20/22 and Engineering change order was written to trim the dash panel in the area of the brake pedal to give more clearance and removed the chance of any interference of the brake pedal with the dash panel. The was implemented immediately in production and all units still on Newmar
property already through production also had the dash panel trimmed.
All of this information was presented to the Safety Committee on 10/5/2022 and at that time it was decided to file a recall for this issue.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| NEWMAR | DUTCH STAR | 2023 |
9 Associated Documents
Recall Acknowledgement
RCAK-22V748-5794.pdf 645.745KB
Defect Notice 573 Report
RCLRPT-22V748-7676.PDF 213.969KB
Owner Notification Letter(Part 577)
RCONL-22V748-7230.pdf 204.106KB
Recall Quarterly Report #1, 2022-4
RCLQRT-22V748-6102.PDF 211.118KB
573 Report Cover Letter
RMISC-22V748-4368.pdf 176.198KB
573 Main Body Brake Pedal
RMISC-22V748-3084.pdf 197.887KB
Remedy Instructions and TSB
RCRIT-22V748-0626.pdf 1752.287KB
Recall Quarterly Report #2, 2023-1
RCLQRT-22V748-0596.PDF 211.219KB
Recall Quarterly Report #3, 2023-2
RCLQRT-22V748-8614.PDF 211.303KB
Latest Recalls Documents
- [Wide Compatibility Heavy Duty Truck Scanner] Compatible with a wide range of 12V & 24V heavy-duty trucks across North America, including major truck brands such as Freightliner
, Peterbilt
, Kenworth
, International
, Volvo
, and Western Star
, with support for common diesel engines from Cummins
, Detroit, and PACCAR
. Whether you're an owner-operator, fleet manager, or repair technician, HD601 helps simplify routine inspections, preventive maintenance, and everyday fault checks. Vehicle coverage may vary by model year, system, and configuration - [Full-System Diagnostic Truck Scanner] This heavy duty diagnostic scanner supports full-system diagnostics for heavy-duty trucks, including Engine, Transmission, ABS, and more.It helps quickly identify faults, pinpoint problem areas, troubleshoot faster, and understand which systems need attention before repairs. Compatible light-duty vehicles support OBD2 diagnostics only
- [DTC Library + Live Data] This truck diagnostic scanner's built-in DTC library helps truck drivers, DIY users, and more quickly understand fault information. You can also manually enter standard SPN and FMI codes to look up fault details. For roadside situations without internet access, it helps identify possible problem areas
- [2-in-1 Heavy Duty & OBDII Diagnostics] This heavy duty scanner supports both HDOBD and OBDII diagnostics. It provides essential functions including Quick Scan, Full Scan, Live Data, Freeze Frame Data, Fault Code Reading and Clearing, and more. It supports HDOBD protocols such as J1939 and J1587/J1708 for reliable vehicle communication
- [Supports Multiple Vehicle Types] Suitable for various commercial vehicles, including heavy-duty trucks, semi-trucks, buses, and more. This truck scanner diagnostic tool features 6/9/16-pin connectors to support common vehicle interfaces, making it suitable for different vehicle applications and transportation needs
- Boost DPF Performance For Smooth Truck Operation: Facing power loss, weak acceleration or constant DPF warning lights? The DPF regen scan tool offers forced DPF regeneration, DPF Reset, and DPD/DPR functions to clear soot buildup, recover engine output and keep exhaust aftertreatment working properly. Detect DPF‑related errors fast, reduce downtime, and prolong your diesel particulate filter lifespan. Vehicle compatibility varies. Please verify before purchase.
- Full-System Diagnostics with Real-Time Live Data: This truck scanner diagnostic tool covers Engine, ABS, Transmission, SRS, SAS, TPMS and other core vehicle systems. Read & clear fault codes, access live data stream, freeze frame, I/M readiness, DTC lookup and additional practical functions. Leverage real‑time data to quickly locate faults and support reliable repair judgements.
- 7+ Resets ‑ Perform Essential Service Procedures: The heavy duty diagnostic tool comes with 7+ professional service resets. It supports DPF Regen for soot removal, Oil Reset to erase service reminders, Injector Coding for new injectors, DEF Test, Speed Limit Adjustment, Cylinder Cutout for weak cylinder detection, Clutch Relearn for improved clutch engagement. Run these resets after service or component replacement to keep your truck working properly. Available functions vary by vehicle model.
- One Professional heavy duty scanner for 50+ Truck Brands: Compatible with J1939, J1708, J1587, and OBD2/CAN protocols this semi truck scanner delivers wide coverage for mainstream diesel trucks and commercial vehicles. Supported brands include Cummins
, Detroit, Caterpillar
, Paccar
, Volvo
, Freightliner
, Kenworth
, Peterbilt
, International
, Mack
, Isuzu
, Hino, Scania, Mercedes-Benz
, and more. This single diesel diagnostic scanner lets you service more vehicles and cut down tool investment costs. - Expert Remote Diagnostic Support: Faced with unexpected truck breakdowns? Equipped with built‑in TeamViewer and tech‑to‑tech support, this diesel truck scanner enables secure real‑time remote connection with professional technicians for diagnosis and troubleshooting. Share live vehicle data and send diagnostic feedback for quicker technical analysis to get expert guidance, no on‑site service required. Minimize downtime, prevent unnecessary repairs and get your truck back on the road sooner.
- BROAD VEHICLE & ENGINE COVERAGE: Professional heavy duty truck scanner for trucks, buses, medium-duty vehicles, construction and agricultural equipment. Supports major brands including Freightliner
, Kenworth
, Peterbilt
, Mack
, International
, Volvo
, Hino and Isuzu
, plus Cummins
, Detroit, PACCAR
, Caterpillar
and International
A26 engines. J1939/J1708 support covers newer and legacy commercial vehicles. Verify coverage before purchase - DPF REGEN & DEF/SCR: Diagnose supported diesel aftertreatment systems with DPF regeneration, soot load, differential pressure, exhaust temperature, NOx sensor and DEF level data. Helps identify DPF blockage, excessive soot, DEF/SCR faults, warning lights and derate-related issues, providing key data for faster aftertreatment diagnosis and service
- BIDIRECTIONAL ACTIVE TESTS: Go beyond code reading with two-way component testing. Command and monitor supported injectors, EGR/VGT actuators, cooling fans, fuel pumps and relays to help verify operation. Cylinder cut-off testing helps identify misfires, cylinder contribution and injector-related issues, reducing unnecessary parts replacement
- 40+ DIESEL SERVICE FUNCTIONS: Focused on high-frequency shop tasks including oil reset, injector coding, speed limiter adjustment and idle speed adjustment. Additional service and reset functions support chassis and other routine maintenance needs. Speed and idle adjustments remain within supported manufacturer parameters
- INDUSTRIAL-GRADE DUAL-CHIP HARDWARE: Quad-core 2.0 GHz processor and automotive-grade communication MCU support smooth multitasking and reliable vehicle communication. Wireless VCI offers up to 10 m Bluetooth connectivity. An 8-inch high-brightness display supports glove-friendly use
- Diagnose Heavy-Duty Truck Problems Fast — Read and clear fault codes and diagnose warning light issues on many Class 4–8 diesel trucks including Freightliner
, Peterbilt
, Kenworth
, Volvo
, Mack
and Cummins
-powered vehicles - Help Reduce Downtime & Repair Costs — It offers full system diagnostics for major trucks meeting standard protocols, along with complete OBD2 functionality. Quickly check engine faults, view live truck data and identify issues before expensive repair shop visits or unnecessary repairs
- No complicated setup required — Simple menus and built-in DTC explanations make this truck code reader easy to use for owner-operators, mobile mechanics and small fleet maintenance
- Live Data & Built-in DTC Lookup — View real-time engine data and built-in truck fault code definitions directly on the scanner to help understand vehicle problems faster without searching through manuals
- Free Lifetime Updates & Technical Support — Includes free software updates plus responsive technical support for setup, compatibility and everyday truck diagnostics
- HANDLE MORE HEAVY-DUTY JOBS WITH ONE SCANNER — The ANCEL X7HD PRO brings full-system diagnostics, HDOBD/OBD2 diagnostics, 42+ service functions, bi-directional controls, and ECU coding into one heavy-duty scan tool. Built for diesel technicians, repair shops, and fleet maintenance teams that need one scanner for everyday diagnostics, service, active tests, and post-repair work
- TAKE ON 42+ SERVICE & RESET JOBS IN-HOUSE — Perform supported DPF regeneration, injector coding, oil reset, throttle adaptation, EPB reset, ABS bleeding, idle/speed adjustment, and more. Handle more routine maintenance and service work in your own shop or fleet yard instead of relying on a dealer or separate tools for every job
- COMMAND COMPONENTS & CHECK THEIR RESPONSE — Bi-directional control lets you command supported components such as injectors, cooling fans, throttle actuators, and ABS-related systems, then check how they respond. Use active tests to narrow down a problem before tearing things apart or replacing parts, helping you troubleshoot based on actual component behavior instead of fault codes alone
- CODE & MATCH MODULES AFTER REPLACEMENT — Perform supported ECU coding, module matching, adaptations, and relearn procedures when replacing compatible components or control modules. Complete more post-repair setup with the same scanner and help ensure replacement modules are properly configured to communicate with the vehicle
- DIAGNOSE MORE SYSTEMS ACROSS A MIXED FLEET — Read and clear codes, view live data and freeze frame information, and access supported systems including Engine, Transmission, ABS, and Body. Coverage includes compatible Freightliner
, Kenworth
, Peterbilt
, Volvo
, Mack
, and International
trucks; Cummins
, Caterpillar
, Detroit, PACCAR
, and Navistar
engines; plus supported OBD2/HDOBD vehicles—giving multi-brand shops and fleets broader coverage from one tool
SEOCONTENT-START
NEWMAR
CORPORATION NEWMARCORP.COM NEWMAR
CORPORATION · 355 N DELAWARE ST · NAPPANEE, IN 46550-0030 (574) 773-7791 · FAX (574) 773-5153 · WWW.NEWMARCORP.COM Page 1 of 1 10/06/2022 VIA E-MAIL RECEIPT CONFIRMATION REQUESTED Mr. Greg Rea Associate Administrator for Enforcement NHTSA NEF-200, Room W45-306 1200 New Jersey Avenue, SE Washington, DC 20590 Re: Newmar
Corporation Part 573 Defect and Noncompliance Information Report Mr. Rea: Following is a compulsory ‘defect and noncompliance information report’ pursuant to 49 U.S.C. Chapter 301 and 49 CFR Part 573.6. Newmar
Corporation is reporting this recall campaign concerning possible interference with a fully extended brake pedal coming in contact with the dash panel causing unknown partial brake engagement. Newmar
Corp. will assume responsibility for coordinating and executing this recall, in its entirety. If you need any additional information regarding this recall campaign, please feel free to contact me at (574) 773-7791, Ext. 3443. Sincerely, Rodney Newcomer Codes and Compliance Manager Newmar
Corporation [email protected]
**************************************************************************************************************
NEWMAR
CORPORATION NEWMARCORP.COM NEWMAR
CORPORATION · 355 N DELAWARE ST · NAPPANEE, IN 46550-0030 (574) 773-7791 · FAX (574) 773-5153 · WWW.NEWMARCORP.COM Page 1 of 3 10/06/2022 Defect and Noncompliance Information Report Newmar
Corporation was made aware of a potential equipment defect relating to motor vehicle safety that may exist in the vehicles listed below. Newmar
Corporation is furnishing notification to the National Highway Traffic Safety Administration pursuant to 49 U.S.C. Chapter 301 and 49 CFR Part 573.6. Newmar
Corporation’s campaign identification number will be assigned by NHTSA. Final Stage Vehicle Manufacturer Newmar
Corporation 355 N Delaware St. Nappanee, IN 46550-0030 Inquiries should be directed to: Sherrena Beer Consumer Affairs Newmar
Corporation 355 N. Delaware St. Nappanee, IN 46550-0030 Phone: (574) 773-7791 Fax: (574) 773-2007 Identification of Vehicles The vehicle models involved in this recall are: 2023 Dutch Star motorhomes. These vehicles were manufactured by Newmar
Corporation between 1/20/2022 and 8/18/2022. Comprehensive Vehicle Population The total number of vehicles included in this campaign is 32. Effected Population Assessment 100% of the vehicles identified above may contain defective equipment. Page 2 of 3 Defect Description On certain Newmar
Dutch Star class A motorhomes built on both Spartan and Freightliner
chassis it was discovered that when the adjustable brake pedal is fully extended towards the driver the pedal may contact the dash panel causing it to have unknown partial brake engagement. If the brake is unknowingly engaged for a long period of time, it could cause brake overheating which could cause brake failure. The potential of brake overheating, and possible failure increase the risk for a crash. Manufacturer: Newmar
Corporation 355 N. Delaware St. Nappanee, IN 46550 Ph. 574-773-7791 Principle Event Chronology Newmar
Corporation is reporting this recall following the notification from a dealer on 9/12/22 that a driver delivering a unit noticed brake pedal catching the dash panel when it was extended towards him in the driver seat. This was causing the brakes to drag on the motorhome. On 9/13/22 Newmar
production tested the brake pedal by extending it out completely towards the driver and noticed the interference with the dash panel. On 9/14/22 the Newmar
Warranty Reduction team was notified of the problem to start working on a review of the issue and next steps to be taken. On 9/20/22 and Engineering change order was written to trim the dash panel in the area of the brake pedal to give more clearance and removed the chance of any interference of the brake pedal with the dash panel. The was implemented immediately in production and all units still on Newmar
property already through production also had the dash panel trimmed. All of this information was presented to the Safety Committee on 10/5/2022 and at that time it was decided to file a recall for this issue. Newmar
Corporation is not aware of any property damage, injury, or death, in vehicles manufactured by Newmar
Corporation, attributed directly or indirectly to this defect. At the time of this letter Newmar
Corporation has not received any warranty claims for this recall. Defect Remedy Program Newmar
Corporation will be conducting this recall in its entirety. Units identified as having the brake pedal interference problem will have the dash panel trimmed to add more clearance at the brake pedal and dash panel. This will remove any chance of future brake pedal interference with the dash panel. All work will be at no cost to customer. Page 3 of 3 If the customer has had the repair performed before receiving this letter, they may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy. For additional information, contact Newmar
Corporation at: Service Department Newmar
Corporation 355 N Delaware St Nappanee, IN 46550-0030 Distributed Notices and Other Communications None This report prepared by: Rodney Newcomer Codes and Compliance Manager Newmar
Corporation
**************************************************************************************************************
Newmar
Corporation PO Box 30 Nappanee, IN 46550 RSB 590 NHTSA #22V 748 November 01, 2022 TC #2022-569 IMPORTANT: Please read this bulletin in its entirety prior to beginning any diagnosis or repairs. NOTICE: Any technical information published in this bulletin is intended for use only by a qualified, Newmar
-authorized service technician. Newmar
is not responsible for the misuse of this information. RECALL SERVICE BULLETIN AFFECTED MODELS 2023 :: Dutch Star DESCRIPTION The dash interferes with full extension of the brake pedal assembly. ISSUE Newmar
Corporation has decided that a defect, which relates to motor vehicle safety, exists in specific motorhomes built on Freightliner
and Spartan Chassis. On certain Newmar
motorhomes, when the adjustable brake pedal is fully extended towards the driver, it may contact the dash panel. This can cause the brakes to partially be applied. Continuing to drive with the brakes partially applied may cause the brakes to overheat and cause a brake failure. UNITS AFFECTED Please refer to the attached population list for affected units and VINs. CORRECTIVE ACTION Follow the attached work instructions to trim the plastic dash panel. PARTS NEEDED Item Description Quantity Newmar
Part # SEAL FOAM SCRN DR 1 ft. 03650 FLAT RATE CODE: 22V 748 LABOR TIME: .5 hr. DEALER ACTION Contact your Newmar
Service Account Manager to obtain authorization and order part(s). CUSTOMER ACTION Contact the Newmar
brand specialist immediately at 1-800-731-8300. An associate will assist you in making an appointment to have this repair completed. Work Instructions for Bulletin 590 :: Brake Pedal/Dash Clearance Issue 1. Measure and mark the dash cut, or print the attached template, and cut out the upper and lower template for a pattern to mark the dash cut. 2. Using an air saw or a similar cutting device, cut slowly along the marks made in the previous step, making sure no wires are in the path of the blade. If you try to cut too fast, you may melt the plastic back together. 3. After cutting, use 80 grit sandpaper to de-bur the cut plastic on the dash, and discard the plastic piece that was removed. 4. Add a piece of foam tape to the back side of the dash in line with the brake pedal arm. This will eliminate dash rattling if the pedal arm is still close while driving with the pedal assembly fully extended.
**************************************************************************************************************
NEWMAR
CORPORATION . NEWMARCORP.COM NEWMAR
CORPORATION · 355 N DELAWARE ST · NAPPANEE, IN 46550-0030 (800) 731-8300 · WWW.NEWMARCORP.COM P A Page 1 of 2 IMPORTANT SAFETY RECALL This notice applies to your vehicle VIN. #_______________________ Name Address City, State Zip code Date: 10/24/2022 Motor Vehicle Recall Notification – Recall Campaign No. 22V-748 Dear Valued Customer: This notice is being sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. REASON FOR THIS RECALL Newmar
Corporation has decided that a defect, which relates to motor vehicle safety exists on certain Newmar
Motorhomes built on both Freightliner
and Spartan chassis. When the adjustable brake pedal is fully extended towards the driver, it may contact the dash panel. This can cause the brakes to partially apply. If you continue to drive with the brakes partially applied, the brakes could overheat and cause a brake failure. These motorhomes require immediate service. Continued use poses a potential safety hazard. The Safety Risk Overheated brakes or a brake failure could increase the risk of a crash. WHAT WE WILL DO Newmar
Corp. will provide owners of all affected motorhomes a remedy for the potential defect at no charge for parts or labor. The dash panel will be inspected and trimmed to eliminate the contact with the adjustable brake pedal when it is fully extended towards the driver. The total expected time for repair is .5 hrs. However, due to scheduling times the service provider may need the vehicle longer. WHAT YOU NEED TO DO As this defect does affect motor vehicle safety, it is recommended that you call Newmar
service department immediately at 1-800-731-8300. An associate will assist you in making an appointment to have this repair completed. Federal regulations require that any vehicle lessor receiving this recall notification must forward a copy of this notice to the lessee within ten days. If you have had the repair performed before receiving this letter, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy. For additional information, contact Newmar
Corporation at: Service Department Newmar
Corporation 355 N Delaware St Nappanee, IN 46550-0030 Newmar
dealers are best equipped to obtain parts and provide service to ensure your vehicle is corrected as promptly as possible. HOWEVER, if you take your vehicle to your dealer on the scheduled date and this condition is not remedied on that date or within five days; please contact the Newmar
Corporation Customer Service Department at 1-800-731-8300. You may also submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., SE., Washington DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov. NEWMAR
CORPORATION · 355 N DELAWARE ST · NAPPANEE, IN 46550-0030 (574) 773-7791 · Fax (574)773-5153 · WWW.NEWMARCORP.COM P A Page 2 of 2 If you no longer own this vehicle, please furnish us the complete name, phone number, e-mail and physical address of the person or dealership you sold or traded your vehicle to. Thank you for your cooperation. Your safety and satisfaction with your Newmar
product is important to us and we regret any inconvenience to you. Sincerely, Newmar
Corporation
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-748 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Newmar
Corporation Submission Date : OCT 07, 2022 NHTSA Recall No. : 22V-748 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Newmar
Corporation Address : 355 North Delaware Street PO Box 30 Nappanee IN 46550 Company phone : 574-773-7791 Population : Number of potentially involved : 32 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2023-2023 Newmar
Dutch Star Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : On certain Newmar
Dutch Star class A motorhomes built on both Spartan and Freightliner
chassis it was discovered that when the adjustable brake pedal is fully extended towards the driver the pedal may contact the dash panel causing it to have unknown partial brake engagement. If the brake is unknowingly engaged for a long period of time, it could cause brake overheating which could cause brake failure. The potential of brake overheating, and possible failure increase the risk for a crash. Dutch Star = 32 Production Dates : JAN 20, 2022 – AUG 18, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : On certain Newmar
Dutch Star class A motorhomes built on both Spartan and Freightliner
chassis it was discovered that when the adjustable brake pedal is fully extended towards the driver the pedal may contact the dash panel causing it to have unknown partial brake engagement. If the brake is unknowingly engaged for a long period of time, it could cause brake overheating which could cause brake failure. The potential of brake overheating, and possible failure increase the risk for a crash. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : The potential of brake overheating, and possible failure increase the risk for a crash. Description of the Cause : On certain Newmar
Dutch Star class A motorhomes built on both Spartan and Part 573 Safety Recall Report 22V-748 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Freightliner
chassis it was discovered that when the adjustable brake pedal is fully extended towards the driver the pedal may contact the dash panel causing it to have unknown partial brake engagement. Identification of Any Warning that can Occur : Possible smell of hot brakes Involved Components : Component Name 1 : Dutch Star Dash Component Description : Dash Panel in front of driver seat Component Part Number : NR Supplier Identification : Component Manufacturer Name : Newmar
Corp Address : 355 N. Delaware St PO Box 30 Nappanee Indiana 46550 Country : United States Chronology : Newmar
Corporation is reporting this recall following the notification from a dealer on 9/12/22 that a driver delivering a unit noticed brake pedal catching the dash panel when it was extended towards him in the driver seat. This was causing the brakes to drag on the motorhome. On 9/13/22 Newmar
production tested the brake pedal by extending it out completely towards the driver and noticed the interference with the dash panel. On 9/14/22 the Newmar
Warranty Reduction team was notified of the problem to start working on a review of the issue and next steps to be taken. On 9/20/22 and Engineering change order was written to trim the dash panel in the area of the brake pedal to give more clearance and removed the chance of any interference of the brake pedal with the dash panel. The was implemented immediately in production and all units still on Newmar
property already through production also had the dash panel trimmed. All of this information was presented to the Safety Committee on 10/5/2022 and at that time it was decided to file a recall for this issue. Part 573 Safety Recall Report 22V-748 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Description of Remedy : Description of Remedy Program : Newmar
Corporation will be conducting this recall in its entirety. Units identified as having the brake pedal interference problem will have the dash panel trimmed to add more clearance at the brake pedal and dash panel. This will remove any chance of future brake pedal interference with the dash panel. All work will be at no cost to customer. How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : Newmar will notify customers and dealers on or before 60 days from the date of this filing. Planned Dealer Notification Date : DEC 06, 2022 – DEC 06, 2022 Planned Owner Notification Date : DEC 06, 2022 – DEC 06, 2022 * NR – Not Reported
SEOCONTENT-END
This product presentation was made with AAWP plugin.





