April 25, 2023 NHTSA CAMPAIGN NUMBER: 23V293000
Missing Belt Guard Reflector/FMVSS 108
A missing belt guard reflector may reduce the visibility of the motorcycle to other drivers, increasing the risk of a crash.
NHTSA Campaign Number: 23V293
Manufacturer Indian
Motorcycle Company
Components VISIBILITY, EQUIPMENT
Potential Number of Units Affected 4
Summary
Indian
Motorcycle Company (Indian
) is recalling certain 2022 Indian
Chief Bobber, Indian
Chief Dark Horse, and Indian
Chief Bobber Dark Horse motorcycles. These motorcycles may be missing a belt guard reflector. As such, these motorcycles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, “Lamps, Reflective Devices, and Associated Equipment.”
Remedy
Dealers will install a belt guard reflector, as necessary, free of charge. The manufacturer has not yet provided a schedule for recall notification. Owners may contact Indian
customer service at 1-877-204-3697. Indian
’s number for this recall is I-23-05.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check for Indian Motorcycle Recalls
Chronology :
In March 2023, during a routine audit. it was identified that an automated quality hold for a missing belt guard reflector was incorrectly closed during production. In response, Indian
Motorcycle began investigating. Indian
Motorcycle conducted appropriate diligence to ascertain the scope of the potentially affected vehicles and the root cause for improper closure of the missing reflector quality hold.
The investigation identified 5 suspect VINs outside of lndian’s control. Indian
contacted the dealer in possession of one unit, who confirmed the belt guard reflector was properly installed ( vehicle therefore removed from affected population). Indian
has been unable to inspect to confirm the condition of the remaining 4 VINs as they are registered with consumers.
Subsequently, on April 18, 2023, Indian
Motorcycle decided that the lack of belt guard reflector constitutes a non-compliance with FMVSS 108 and decided to recall the affected bikes.
Indian
Motorcycle has not identified any warranty claims, other field or service reports, or other information related to this issue.
3 Affected Products
Vehicles
2 Associated Documents
Noncompliance Notice 573 Report
RCLRPT-23V293-1829.PDF 467.675KB
Recall Acknowledgement
RCAK-23V293-7662.pdf 646.163KB
Latest Recalls Documents
- Cool and Comfortable Ride: Crafted from polyester and PE to assure breathability and comfort, enhanced with a silver mesh to keep you cool while riding
- Relieve Waist : Relieve waist with ease with the humanized curve design and built-in curved rubber back plate of this motorcycle kidney belt. The optimal support and high riding comfort it provides makes it excellent for all types of riders seeking flexibility and comfort during their rides
- Adjustable Comfort: Achieve a warm fit with our motorcycle kidney belt's fully adjustable design. The touch fastener and elastic belt assure a comfortable and stable wearing experience, catered to personal waist circumference
- Professional Safety Protection: Tailored for motorcycle enthusiasts, this kidney belt delivers safe and secure waist protection, safeguarding against accidents and enhancing your riding experience with unmatched professional protection
- Long-Lasting Quality: Built to withstand the toughest conditions, our Motorcycle Kidney Belt is expertly crafted from sturdy PVC fabric that boasts high durability and reliability, ensuring longevity with every use
- Provides lower back support when riding
- Gentle compression helps protect lower abdomen and internal organs
- Ergonomic design provides maximum lumbar support
- Country of Origin : China
- : This waist protector belt is designed to offer for motorcyclists during rides, effectively resists collisions and impacts.
- Adjustable and Comfortable: The belt can be easily adjusted to provide a snug fit, for all body types, ensuring maximum comfort for the .
- Multi Purpose : Whether you're on an off road or a long distance ride, this waist protector is suitable for all types of riding conditions.
- Materials: The waist protector is made with excellent PVC, polyester, and PE materials, high toughness, wear , with long lasting use.
- Easy to Wear: The waist protector belt features a convenient buckle closure, making it easy to wear and remove whenever needed.
- Ergonomically designed for maximum stability of the torso and lower back.
- Supportive thermoformed PE foam and molded PU support panels for a conforming yet comfortable fit.
- Removable quilted thermal liner adapts the belt to suit a range of climate conditions.
- Dual elastic waistband for a secure and precise fit.
- Wind breaking front flaps; closure belt has a membrane in between the layers to prevent wind exposure.
- 👉 SIZE IS A KEY - choose by measuring your belly, NOT by pant size 👉X-LARGE size fits Circumference 41 - 48 inches Around Belly
- ✅ WELL CONSTRUCTED – Special thin orthopedic material, industrial Vecro and 6 plastic stays able support your kidney during a long motorcycle riding
- ✅ BACK BRACE KIDNEY BELT – useful while cutting grass, on a motocross racing, on an off-roading, on a long trip in the car on the freeway. No more sore back with this kidney protector belt
- ✅ EASY TO PUT ON AND TAKE OFF – breathable kidney belt for men and women can be used on top of regular clothing. If compare with bulky belts on the market, AVESTON brace has slim designe and invisible
- ✅ REPLACEMENT GUARANTEE – If you have any issues - contact seller. Order therapeutic kidney belt back brace at the most attractive price, right now!
Last update on 2026-06-19 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
Part 573 Safety Recall Report Manufacturer Name : Indian
Motorcycle Company Submission Date : APR 25, 2023 NHTSA Recall No. : 23V-293 Manufacturer Recall No.: 1-23-05 0MB Control No.: 2127-0004 23V-293 ~ om NHTSA HA.TIOMAl HIOHWAYTRAJJ’IC SAFETY AOMIMISTAATlON Manufacturer Information : Population : Manufacturer Name : Indian
Motorcycle Company Address : 2100 Highway 55 Medina MN 55340 Company phone : 800-765-2747 Vehicle Information : Vehicle 1: 2022-2022 Indian
Chief Bobber Vehicle Type: Body Style: Power Train : NR Number of potentially involved : 4 Estimated percentage with defect : 100 % Descriptive Information : The recall population was determined by reviewing vehicle hold documentation and internal production quality data to identify units that may not have had the reflector installed in production. The recalled motorcycles differ from motorcycles that were not included in the recall in that they may have been built without a belt guard reflector. Production Dates: OCT 05, 2021-OCT 05, 2021 VIN Range 1 : Begin : 56KDLBAG1N~ End: 56KDLBAG1N~ □ Not sequential Vehicle 2: 2022-2022 Indian
Chief Dark Horse Vehicle Type: Body Style: Power Train : NR Descriptive Information : The recall population was determined by reviewing vehicle hold documentation and internal production quality data to identify units that may not have had the reflector installed in production. The recalled motorcycles differ from motorcycles that were not included in the recall in that they may have been built without a belt guard reflector. Production Dates: AUG 18, 2021-AUG 18, 2021 VIN Range 1 : Begin : 56KDMABHON~ End: 56KDMABHON~ □ Not sequential The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report Vehicle 3: 2022-2022 Indian
Chief Bobber Dark Horse Vehicle Type: Body Style: Power Train : NR 23V-293 Page2 Descriptive Information : The recall population was determined by reviewing vehicle hold documentation and internal production quality data to identify units that may not have had the reflector installed in production. The recalled motorcycles differ from motorcycles that were not included in the recall in that they may have been built without a belt guard reflector. Production Dates : JUN 06, 2022 -JUN 06, 2022 VIN Range 1 : Begin: 56KDLABHSN~ End: 56KDLABH9N~ [Z] Not sequential Description of Noncompliance : Description of the Indian
Motorcycle has determined that certain Model Year 2022 Chief Noncompliance : motorcycles may have been manufactured without a belt guard reflector and fail to comply with the requirements of FMVSS 108. FMVSS 1 : 108 – Lamps, reflective devices, and assoc. Equipment FMVSS 2 : NR Description of the Safety Risk : If the motorcycle is missing the belt guard reflector, it can reduce the motorcycle’s visibility to other drivers, increasing the risk of a crash. Description of the Cause : Incorrect manual closure of a quality hold allowing vehicle( s) to be shipped. Identification of Any Warning The issue is detectable by a visual observation of the motorcycle and the lack of that can Occur : a belt guard reflector. Involved Components : Component Name 1 : Belt Guard Deflector Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer Name: NR The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report Address: NR NR Country: NR Chronology : 23V-293 Page3 In March 2023, during a routine audit. it was identified that an automated quality hold for a missing belt guard reflector was incorrectly closed during production. In response, Indian
Motorcycle began investigating. Indian
Motorcycle conducted appropriate diligence to ascertain the scope of the potentially affected vehicles and the root cause for improper closure of the missing reflector quality hold. The investigation identified 5 suspect VINs outside of lndian’s control. Indian
contacted the dealer in possession of one unit, who confirmed the belt guard reflector was properly installed ( vehicle therefore removed from affected population). Indian
has been unable to inspect to confirm the condition of the remaining 4 VINs as they are registered with consumers. Subsequently, on April 18, 2023, Indian
Motorcycle decided that the lack of belt guard reflector constitutes a non-compliance with FMVSS 108 and decided to recall the affected bikes. Indian
Motorcycle has not identified any warranty claims, other field or service reports, or other information related to this issue. Description of Remedy : Description of Remedy Program : Polaris
will contact affected consumers to determine whether their motorcycles have the belt guard reflector installed. If any of the affected motorcycles were built without the belt guard reflector installed, Polaris
will inform dealers of the reported concern and provide instructions to dealers to install the belt guard reflector at no cost to consumers. Customers who paid to replace or service their vehicle for this condition prior to the recall notification may be eligible for reimbursement per Polaris
’ General Recall Reimbursement Plan on file with NHTSA. How Remedy Component Differs Installation of the belt guard reflector on the affected motorcycles will from Recalled Component: resolve the noncompliance with FMVSS 108. Identify How/When Recall Condition No detection issues were identified with the automated quality system. was Corrected in Production : Indian
re-assigned the auditor responsible for the manual error to an alternative function. Recall Schedule : Description of Recall Schedule : Upon approval. owner notification letters will be mailed no later than 60 days after submission of this report. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR * NR – Not Reported 23V-293 The information contained in this report was submitted pursuant to 49 CFR §573 Page4
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.





