January 4, 2024 NHTSA CAMPAIGN NUMBER: 24V002000
A detached drum can become a road hazard, increasing the risk of a crash or injury.
NHTSA Campaign Number: 24V002
Manufacturer Terex Advance Mixer, Inc.
Components EQUIPMENT
Potential Number of Units Affected 125
Summary
Terex Advance Mixer, Inc. (Terex) is recalling certain 2023-2024 Commander, Charger, and 2023 MM300 concrete mixer
trucks. The bolts connecting the drum to the drum drive plate may loosen, resulting in the drum separating from vehicle.
Remedy
The remedy is currently under development. The manufacturer has not yet provided a schedule for recall notification. Owners may contact Terex customer service at 1-800-678-5961.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
On the afternoon of January 2nd, 2024 a team member noticed a defective torque wrench being used to fasten bolts. Management was notified and an investigation was opened into this issue. An engineering representative was sent out to inspect additional units that were still on site. After reviewing the findings on January 4th it was determined that a safety recall was appropriate.
5 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| TEREX ADVANCE | CHARGER | 2023-2024 |
| TEREX ADVANCE | COMMANDER | 2023-2024 |
| TEREX ADVANCE | MM300 | 2023 |
4 Associated Documents
Defect Notice 573 Report
RCLRPT-24V002-6868.PDF 214.431KB
Recall Acknowledgement
RCAK-24V002-9199.pdf 646.378KB
Recall 573 Report – 01/09/2024
RCLRPT-24V002-5755.PDF 214.433KB
Recall 573 Report – 01/22/2024
RCLRPT-24V002-8349.PDF 214.728KB
Latest Recalls Documents
For the Latest and Most recent Recall Information Visit the link below…
- 【Powerful Motor】This Cement mixer equiped 2100 Watt motor with 270-900 RPM, Suitable for mixing oil paint, cement, fodder, mud, printing ink, thin-set mortar, plaster, cementitious adhesives
- 【Adjustable 6 Speed】This Concrete mixer design a 6 speeds with self-locking switch and screw-shaped dual-paddle for effective and thorough mixing, saving time
- 【Overheating Protection】Mud mixer carry with Porous heat dissipation design and automatic power-off when overheated for longer-lasting use.
- 【Easy Operation 】Dual ergonomic handle and Operation Locking Switch reduce finger fatigue while mixing; All-copper carbon brush holder for easy and quick maintenance.
- 【What you get】Concrete Mixer Kit x1 ; Spare Carbon Brush (7*11*15mm) x 2 ; Installation wrench x 2 ;
- 【Powerful Motor】This Cement mixer equiped 2100 Watt motor with 270-900 RPM, Suitable for mixing oil paint, cement, fodder, mud, printing ink, thin-set mortar, plaster, cementitious adhesives and more.
- 【Adjustable 6 Speed】This Concrete mixer design a 6 speeds with self-locking switch and screw-shaped dual-paddle for effective and thorough mixing, saving time and preventing splashing.
- 【Overheating Protection】This Mud mixer carry with Porous heat dissipation design and automatic power-off when overheated for longer-lasting use.
- 【Easy Operation and maintenance】Dual ergonomic handle and Operation Locking Switch reduce finger fatigue while mixing; All-copper carbon brush holder for easy and quick maintenance.
- 【What you get】Concrete Mixer Kit x1 ; Spare Carbon Brush (7*11*15mm) x 2 ; Installation wrench x 2 ;
- Cleans easy with solid steel drums, and IP45 wash down certified motor and gear box
- Motor drive box is factory-assembled for easy and mess-free installation
- Quick 1-person assembly can be done in under thirty minutes
- Steel handle uses an iron ring and safety lock for easy adjustments and locking in place safely and easily
- Low-profile height makes it simple to pour into forms, wheelbarrows, and maneuver around
- POWERFUL CONCRETE MIXER:Electric Concrete Mixer is equipped with a 450W copper motor (Horsepower:3/5HP). This concrete mixer is equipped with a large capacity of 4.3 cubic feet, which can handle a large amount of materials at one time and significantly enhance work efficiency. The mixer can finish the mixing work efficiently and quickly
- STABLE AND DURABLE STRUCTURE: Made of high-strength steel, the surface is treated with a durable powder coating, featuring rust and corrosion resistance. It is long-lasting and suitable for long-term use. Additionally, a triangular support structure design is adopted, further enhancing stability
- MULTIFUNCTIONAL CEMENT MIXER: This robust and durable cement mixer is not only suitable for mixing concrete, mortar, and plaster, but also ideal for agricultural tasks such as seed and feed mixing. Thanks to its compact size, this cement mixer is the perfect assistant for completing small-scale construction projects
- FLEXIBLE MOVEMENT AND HIGH PRACTICALITY: Our electric cement mixer is equipped with two 7-inch solid rubber wheels, allowing the mixer to be easily moved around your yard or farm. With 360-degree full-range mixing, it ensures even blending without dead angles, saving both time and effort during operation
- EASY TO OPERATE：This cement mixer comes complete with all necessary hardware components and a step-by-step operation manual, making assembly straightforward. We also offer 24-hour customer service to address any post-purchase or product-related inquiries.
- 【High-power motor】The SILVEL cement mixer is equipped with a 2300W/110V copper motor, providing a more efficient and stable mixing process. It is suitable for mixing slurry, cement, mortar, paint, feed, etc.
- 【Heat Emission】This concrete mixer has a high efficient ventilation system and overheating protection system. Therefore, it can ensure the safety if use as well the greatly extend the service life.
- 【Convenient Use】Our concrete mixer machine is designed with light, anti-impact and rust-proof material. Simple and well-made accessories make it easy to assemble, use and replace.
- 【6 Adjustable Speeds】The mud mixer has 6 speed gears. Dual steering wheel handle and self-locking switch can easily meet the different mixing speed requirements of various materials.
- 【Customer Service】We promise to give our customers the best service so you can contact us if you have any questions about quality problems, and we are willing to help you solve them within 24 hours.
Last update on 2026-06-19 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-002
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Terex Advance Mixer, Inc. JAN 04, 2024 NHTSA Recall No. : 24V-002 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Terex Advance Mixer, Inc.
Address : 7727 Freedom Way
Fort Wayne IN 46818 Company phone : 999
Population :
Number of potentially involved : 125 Estimated percentage with defect : NR
Vehicle Information :
Vehicle 1 : 2023-2024 Terex Advance Mixer Commander Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : This issue was caused by continuing to use a torque wrench, for the operation in question, despite the fact that it was damaged. The starting point for the population was determined by reviewing our torque wrench inspection records. The torque wrench was inspected at the beginning of October, and was found to be in good working order. We used this fact to determine the start of the population of trucks potentially involved.
Production Dates : OCT 01, 2023 – JAN 02, 2024
VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2023-2023 Terex Advance Mixer MM300 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : This issue was caused by continuing to use a torque wrench, for the operation in question, despite the fact that it was damaged. The starting point for the population was determined by reviewing our torque wrench inspection records. The torque wrench was inspected at the beginning of October, and was found to be in good working order. We used this fact to determine the start of the population of trucks potentially involved.
Production Dates : OCT 01, 2023 – JAN 02, 2024
VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 24V-002 Page 2 Vehicle 3 : 2023-2024 Terex Advance Mixer Charger Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : This issue was caused by continuing to use a torque wrench, for the operation in question, despite the fact that it was damaged. The starting point for the population was determined by reviewing our torque wrench inspection records. The torque wrench was inspected at the beginning of October, and was found to be in good working order. We used this fact to determine the start of the population of trucks potentially involved.
Production Dates : OCT 01, 2023 – JAN 02, 2024
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : Bolts securing the drum to the drum drive plate may have been assembled with insufficient torque. An improperly torqued fastener may become loose.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : There is potential of the drum separating from the vehicle, which can result in property damage and /or personal injury
Description of the Cause : NR Identification of Any Warning
that can Occur : Prior to failure, loose or missing hardware might or might not be observed Involved Components : Component Name 1 : NR Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer
Name : NR Address : NR The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-002
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
NR
Country : NR
Chronology :
On the afternoon of January 2nd, 2024 a team member noticed a defective torque wrench being used to fasten bolts. Management was notified and an investigation was opened into this issue. An engineering representative was sent out to inspect additional units that were still on site. After reviewing the findings on January 4th it was determined that a safety recall was appropriate.
Description of Remedy :
Description of Remedy Program : NR How Remedy Component Differs NR from Recalled Component :
Identify How/When Recall Condition NR was Corrected in Production : Recall Schedule :
Description of Recall Schedule : NR
Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-002
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Terex Advance Mixer, Inc. JAN 09, 2024 NHTSA Recall No. : 24V-002 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Terex Advance Mixer, Inc.
Address : 7727 Freedom Way
Fort Wayne IN 46818 Company phone : 999
Population :
Number of potentially involved : 128 Estimated percentage with defect : NR
Vehicle Information :
Vehicle 1 : 2023-2024 Terex Advance Mixer Commander Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : This issue was caused by continuing to use a torque wrench, for the operation in question, despite the fact that it was damaged. The starting point for the population was determined by reviewing our torque wrench inspection records. The torque wrench was inspected at the beginning of October, and was found to be in good working order. We used this fact to determine the start of the population of trucks potentially involved.
Production Dates : OCT 01, 2023 – JAN 02, 2024
VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2023-2023 Terex Advance Mixer MM300 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : This issue was caused by continuing to use a torque wrench, for the operation in question, despite the fact that it was damaged. The starting point for the population was determined by reviewing our torque wrench inspection records. The torque wrench was inspected at the beginning of October, and was found to be in good working order. We used this fact to determine the start of the population of trucks potentially involved.
Production Dates : OCT 01, 2023 – JAN 02, 2024
VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 24V-002 Page 2 Vehicle 3 : 2023-2024 Terex Advance Mixer Charger Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : This issue was caused by continuing to use a torque wrench, for the operation in question, despite the fact that it was damaged. The starting point for the population was determined by reviewing our torque wrench inspection records. The torque wrench was inspected at the beginning of October, and was found to be in good working order. We used this fact to determine the start of the population of trucks potentially involved.
Production Dates : OCT 01, 2023 – JAN 02, 2024
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : Bolts securing the drum to the drum drive plate may have been assembled with insufficient torque. An improperly torqued fastener may become loose.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : There is potential of the drum separating from the vehicle, which can result in property damage and /or personal injury
Description of the Cause : NR Identification of Any Warning
that can Occur : Prior to failure, loose or missing hardware might or might not be observed Involved Components : Component Name 1 : NR Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer
Name : NR Address : NR The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-002
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
NR
Country : NR
Chronology :
On the afternoon of January 2nd, 2024 a team member noticed a defective torque wrench being used to fasten bolts. Management was notified and an investigation was opened into this issue. An engineering representative was sent out to inspect additional units that were still on site. After reviewing the findings on January 4th it was determined that a safety recall was appropriate.
Description of Remedy :
Description of Remedy Program : NR How Remedy Component Differs NR from Recalled Component :
Identify How/When Recall Condition NR was Corrected in Production : Recall Schedule :
Description of Recall Schedule : NR
Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-002
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Terex Advance Mixer, Inc. JAN 22, 2024 NHTSA Recall No. : 24V-002 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Terex Advance Mixer, Inc.
Address : 7727 Freedom Way
Fort Wayne IN 46818 Company phone : 999
Population :
Number of potentially involved : 128 Estimated percentage with defect : 100 %
Vehicle Information :
Vehicle 1 : 2023-2024 Terex Advance Mixer Commander Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : This issue was caused by continuing to use a torque wrench, for the operation in question, despite the fact that it was damaged. The starting point for the population was determined by reviewing our torque wrench inspection records. The torque wrench was inspected at the beginning of October, and was found to be in good working order. We used this fact to determine the start of the population of trucks potentially involved.
Production Dates : OCT 01, 2023 – JAN 02, 2024
VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2023-2023 Terex Advance Mixer MM300 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : This issue was caused by continuing to use a torque wrench, for the operation in question, despite the fact that it was damaged. The starting point for the population was determined by reviewing our torque wrench inspection records. The torque wrench was inspected at the beginning of October, and was found to be in good working order. We used this fact to determine the start of the population of trucks potentially involved.
Production Dates : OCT 01, 2023 – JAN 02, 2024
VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 24V-002 Page 2 Vehicle 3 : 2023-2024 Terex Advance Mixer Charger Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : This issue was caused by continuing to use a torque wrench, for the operation in question, despite the fact that it was damaged. The starting point for the population was determined by reviewing our torque wrench inspection records. The torque wrench was inspected at the beginning of October, and was found to be in good working order. We used this fact to determine the start of the population of trucks potentially involved.
Production Dates : OCT 01, 2023 – JAN 02, 2024
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : Bolts securing the drum to the drum drive plate may have been assembled with insufficient torque. An improperly torqued fastener may become loose.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : There is potential of the drum separating from the vehicle, which can result in property damage and /or personal injury
Description of the Cause : NR Identification of Any Warning
that can Occur : Prior to failure, loose or missing hardware might or might not be observed Involved Components : Component Name 1 : NR
Component Description : BOLT, HHCS,5/8″-11×2 1/4”, ECOGUARD Component Part Number : 30572 Component Name 2 : NR
Component Description : WASHER,5/8″SAE ECOGUARD FINISH Component Part Number : 35136 The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-002
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Supplier Identification : Component Manufacturer
Name : NR Address : NR
NR
Country : NR
Chronology :
On the afternoon of January 2nd, 2024 a team member noticed a defective torque wrench being used to fasten bolts. Management was notified and an investigation was opened into this issue. An engineering representative was sent out to inspect additional units that were still on site. After reviewing the findings on January 4th it was determined that a safety recall was appropriate.
Description of Remedy :
Description of Remedy Program : Provide new bolts and Loctite, along with instructions on how to remedy the issue for all the vehicles affected. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : The components are the same. On January 2nd, 2024 a new torque wrench set to the correct torque specification was implemented into production. Recall Schedule :
Description of Recall Schedule : Impacted customers will be notified starting on 01/26/2024 via owner
notification letter.
Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : JAN 26, 2024 – NR
* NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.