January 11, 2024 NHTSA CAMPAIGN NUMBER: 24V015000
Engine Compartment Fire from Short Circuit
A short circuit increases the risk of a fire.
NHTSA Campaign Number: 24V015000
Manufacturer Altec Industries, Inc.
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 437
Summary
Altec Industries, Inc. (Altec) is recalling certain 2004-2023 AT Series aerial devices. The cables in the engine compartment may contact the vehicle’s hood, damaging the cables and causing a short circuit.
Remedy
Altec will inspect and relocate the cables and fuse blocks, free of charge. Owner notification letters are expected to be mailed March 8, 2024. Owners may contact Altec customer service at 1-877-462-5832. Altec’s number for this recall is CSN-3142.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
A customer notified Altec of a thermal event on an AT unit on November 15, 2023. The customer inspected additional vehicles and found that approximately 10% of their vehicles had visible contact between the hood and electrical cable protective split loom. Altec reviewed the production build records and inspected other potentially affected vehicles. After reviewing the results of Altec’s Investigation and the customer inspections, Altec determined that a potential defect could be present in certain AT units mounted on specific chassis. There have been no other reported accidents, injuries or deaths related to this issue.
20 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| ALTEC | AERIAL DEVICE | 2004-2023 |
3 Associated Documents
Recall 573 Report – 01/19/2024
RCLRPT-24V015-6414.PDF 213.925KB
Recall Acknowledgement
RCAK-24V015-7766.pdf 687.833KB
Defect Notice 573 Report
RCLRPT-24V015-6896.PDF 213.919KB
Latest Recalls Documents
For the Latest and Most recent Recall Information Visit the link below…
- TWELVE CIRCUITS WITH GROUND: Supports twelve ATO or ATC fused branch circuits with integrated negative bus
- 100 A MAXIMUM CAPACITY: Rated for up to 100 amps total capacity and supports up to 30 amps per circuit when used with standard ATO or ATC blade fuses, suitable for higher‑demand DC systems
- INSULATING COVER: Clear protective cover features a secure push‑button latch, integrated spare fuse storage, and recessed label areas for simple circuit identification and maintenance
- CORROSION RESISTANT: Tin‑plated copper buses and durable fuse clips resist corrosion and ensure long‑term conductivity in harsh automotive or marine environments
- FLEXIBLE INSTALLATION: Accepts ring or snap fork terminals; suitable for twenty four hour circuits
- Quick Fix: Red LED warning light will light up immediately when the fuse is blown. It is very easy for you to check and replace the blown fuse
- Safe & Superior Material: Made of environment fire-resist PBT material, this fuse block has high mechanical strength, good insulation, heat & flame resistance. It will hardly cause any issues like fracture, deformation, combustion or short circuit
- Make Wiring Clean：6 Circuit Fuse Block is applied to ATC/ATO (Middle Size) fuses, every positive terminal screw has a negative one, Perfect solution for organizing and protecting a maze of low voltage circuit wiring in your vehicle
- Loads Name Labels: Multifunctional DIY sticker for convenient examination & repair. You can easy to identify which appliance is going wrong. Max operating voltage: 32V DC; Max 30A per circuit & 100A per panel
- Free Blade Fuses: This 6-Circuit Blade Fuse Block widely used in Cars, Buses, Tankers, Boat, Marine, Truck, SUV, Yacht, RV, Ships etc.The package includes 1 x 12V 6-way fuse block,12 x blade type fuse,4 x screws,2 x tip stickers
- 【Product Name】- 6 way marine fuse block waterproof ATO/ATC marine fuse panel. 12v - 36v automotive fuse block, rated max 100A continuous current, and max 30A per way.
- 【Blade Fuse Box】- This 12v 6 way marine fuse box 12v will come with suitable blade fuses for use, includes 2X5A, 2X10A, 4X15A and 4X20A fuses, total 12 pieces of fuses.
- 【LED Indicator】 - This 12V fuse block features LED indicator lights, LED light up when fuse blows, helps you quickly and easily identify the blown fuse.
- 【Label Sticker】 - The fuse block 12 volt automotive will come with a transparent cover and two sheets of stickers, which will help in easily identifying the status of each fuse.
- 【Versatile Application】 - Shields branch circuits via the 12v fuse block from short circuits and overload damage. Keeps wiring neat with the fuse box to prevent device failure in marine/automotive setups.
- [SAFE AND HIGH-QUALITY MATERIALS] This fuse block is made from sustainable PBT and PC materials, meeting high-quality standards. It has strong mechanical strength, good insulation, and is heat-resistant and flame-retardant. All busbars and fuse clips are nickel-plated copper, ensuring excellent conductivity and corrosion resistance. This prevents deformation, combustion, short circuits, or breakage. The PC cover design provides dust and splash protection, prolonging the fuse box's lifespan
- [12-CIRCUIT NEAT WIRING DESIGN] The fuse block features a neat and organized wiring design with 12 separate circuit slots. This allows for clean and orderly distribution of different electronic devices or systems across individual circuits, ensuring independent protection for each of them. The fuse box has a capacity of 100 amps, with each fuse rated at 30 amps, and the marine fuse block includes a grounding busbar. It is a versatile protective device that can safeguard all electronic equipment
- [LED SAFETY INDICATORS & QUICK FIX] The fuse block features an LED indicator that promptly illuminates when a fuse blows, indicating the specific one requiring replacement. With extra fuses provided, you can immediately replace the blown fuse. The fuses are available in different ampere ratings, allowing you to select the suitable one based on the device's current needs. Furthermore, we provide stickers to label each circuit on the housing, greatly simplifying inspection and maintenance tasks
- [EASY TO SET UP & WIDE APPLICATION] The fuse block is equipped with twist-lock screws for quick and easy installation. It uses self-tapping screws for secure and hassle-free mounting. The 12v fuse box is widely used in car, bus, tanker truck, boat, truck, SUV, yachts, RV, and ship. The marine fuse panel can be directly connected to any electrical wiring in vehicles or boats, such as car headlights, dome lights, fog lights, warning lights, car chargers, car fans, car refrigerators, car TVs, etc
- [COMPACT SIZE & SATISFACTORY SUPPORT] The compact design of the fuse block allows it to accommodate multiple fuses within a limited space. This is crucial for organizing electrical systems in vehicles, boats, or other compact areas. The small-sized fuse box can be easily installed in tight areas while ensuring the safe operation of the circuits
- SIX CIRCUITS WITH NEGATIVE BUS: Combines six fused circuits and ground connections in one block
- 100 AMP BLOCK RATING: Rated for up to 100 amps total capacity and supports up to 30 amps per circuit when used with standard ATO or ATC blade fuses, suitable for higher‑demand DC systems
- INSULATING COVER: Clear protective cover features a secure push‑button latch, integrated spare fuse storage, and recessed label areas for simple circuit identification and maintenance
- COMPACT DESIGN: Consolidates branch circuits and in line fuses to reduce wiring clutter
- CORROSION RESISTANT: Tin‑plated copper buses and durable fuse clips resist corrosion and ensure long‑term conductivity in harsh automotive or marine environments
Last update on 2026-06-19 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-015
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Altec Industries, Inc. JAN 11, 2024 NHTSA Recall No. : 24V-015 Manufacturer Recall No. : CSN-3142 Manufacturer Information :
Manufacturer Name : Altec Industries, Inc.
Address : 210 Inverness Center Drive Birmingham AL 35242
Company phone : 205 991 7733
Population :
Number of potentially involved : 393 Estimated percentage with defect : 10 %
Vehicle Information : Vehicle 1 : 2016-2023 Altec AT series aerial device Vehicle Type :
Body Style :
Power Train : NR
Descriptive Information : The recall population was determined from a review of production records.
Production Dates : DEC 01, 2016 – DEC 31, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : Electrical cables routed in the engine compartment could be contacting the vehicle hood when it is closed. Contact could cause rubbing between the cable’s protective split loom and the hood, resulting in the protective split loom of the cable to wear over time.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : Damage to the protective split loom and cable insulation could allow an
electrical short circuit between the cable and the vehicle hood. An electrical short circuit increases the risk of serious injury, death, or property damage due to a thermal event.
Description of the Cause : NR Identification of Any Warning
that can Occur : A periodic inspection of the components under the hood could visually identify the signs of wear between the hood and the protective split loom of the cable.
Involved Components : Part 573 Safety Recall Report 24V-015 Page 2 Component Name 1 : battery mounted 3-circuit DC fuse block Component Description : battery mounted 3-circuit DC fuse block Component Part Number : 991044859 Supplier Identification : Component Manufacturer
Name : Altec Industries Inc. Address : 2106 S. Riverside Rd
Saint Joseph Missouri 64507
Country : United States Chronology :
A customer notified Altec of a thermal event on an AT unit on November 15, 2023. The customer inspected additional vehicles and found that approximately 10% of their vehicles had visible contact between the hood and electrical cable protective split loom. Altec reviewed the production build records and inspected other potentially affected vehicles. After reviewing the results of Altec’s Investigation and the customer inspections, Altec determined that a potential defect could be present in certain AT units mounted on specific chassis. There have been no other reported accidents, injuries or deaths related to this issue. Description of Remedy :
Description of Remedy Program : A clearance test will be completed to ensure proper clearance between the
electrical cable’s split loom and the hood. The cable routing and fuse block locations will be updated if the clearance is insufficient. The recall remedy will be completed free of charge when presented for repair. The Altec Warranty Policy covers the recall remedy, including cases requiring reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : The remedy will ensure clearance between the hood and the cable’s protective split loom.
The product procedures, check sheets, and Pre-delivery Inspection now include a clearance test to verify under-hood clearances. Recall Schedule : The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-015
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Description of Recall Schedule : Altec will issue CSN-3142 to the owners of the affected units. Altec does
not have a dealer network and issues letters to owners only.
Planned Dealer Notification Date : MAR 08, 2024 – MAR 08, 2024
Planned Owner Notification Date : MAR 08, 2024 – MAR 08, 2024
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-015
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Altec Industries, Inc. JAN 19, 2024 NHTSA Recall No. : 24V-015 Manufacturer Recall No. : CSN-3142 Manufacturer Information :
Manufacturer Name : Altec Industries, Inc.
Address : 210 Inverness Center Drive Birmingham AL 35242
Company phone : 205 991 7733
Population :
Number of potentially involved : 437 Estimated percentage with defect : 10 %
Vehicle Information : Vehicle 1 : 2004-2023 Altec AT series aerial device Vehicle Type :
Body Style :
Power Train : NR
Descriptive Information : The recall population was determined from a review of production records.
Production Dates : FEB 01, 2004 – DEC 31, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : Electrical cables routed in the engine compartment could be contacting the vehicle hood when it is closed. Contact could cause rubbing between the cable’s protective split loom and the hood, resulting in the protective split loom of the cable to wear over time.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : Damage to the protective split loom and cable insulation could allow an
electrical short circuit between the cable and the vehicle hood. An electrical short circuit increases the risk of serious injury, death, or property damage due to a thermal event.
Description of the Cause : NR Identification of Any Warning
that can Occur : A periodic inspection of the components under the hood could visually identify the signs of wear between the hood and the protective split loom of the cable.
Involved Components : Part 573 Safety Recall Report 24V-015 Page 2 Component Name 1 : battery mounted 3-circuit DC fuse block Component Description : battery mounted 3-circuit DC fuse block Component Part Number : 991044859 Supplier Identification : Component Manufacturer
Name : Altec Industries Inc. Address : 2106 S. Riverside Rd
Saint Joseph Missouri 64507
Country : United States Chronology :
A customer notified Altec of a thermal event on an AT unit on November 15, 2023. The customer inspected additional vehicles and found that approximately 10% of their vehicles had visible contact between the hood and electrical cable protective split loom. Altec reviewed the production build records and inspected other potentially affected vehicles. After reviewing the results of Altec’s Investigation and the customer inspections, Altec determined that a potential defect could be present in certain AT units mounted on specific chassis. There have been no other reported accidents, injuries or deaths related to this issue. Description of Remedy :
Description of Remedy Program : A clearance test will be completed to ensure proper clearance between the
electrical cable’s split loom and the hood. The cable routing and fuse block locations will be updated if the clearance is insufficient. The recall remedy will be completed free of charge when presented for repair. The Altec Warranty Policy covers the recall remedy, including cases requiring reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : The remedy will ensure clearance between the hood and the cable’s protective split loom.
The product procedures, check sheets, and Pre-delivery Inspection now include a clearance test to verify under-hood clearances. Recall Schedule : The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-015
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Description of Recall Schedule : Altec will issue CSN-3142 to the owners of the affected units. Altec does
not have a dealer network and issues letters to owners only.
Planned Dealer Notification Date : MAR 08, 2024 – MAR 08, 2024
Planned Owner Notification Date : MAR 08, 2024 – MAR 08, 2024
* NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.