February 21, 2024 NHTSA CAMPAIGN NUMBER: 24V126000
Overloaded Electrical System May Cause Fire
Overloaded electrical circuits can overheat, increasing the risk of fire.
NHTSA Campaign Number: 24V126
Manufacturer Spencer Manufacturing, Inc.
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 8
Summary
Spencer Manufacturing, Inc. (Spencer) is recalling certain 2020 pumper fire trucks equipped with Weldon 8X16 Input-Output nodes. In the event of a short circuit or wiring failure, the firmware in the node may fail to shut off the output pin, resulting in overloaded electrical circuits.
Remedy
Weldon will update the firmware, free of charge. Owner notification letters were mailed January 24, 2024. Owners may contact Akron Brass customer service at 1-800-228-1161 or Spencer customer service at 1-269-637-8721.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
TECHNICAL SERVICE BULLETIN 23-001E
V‐MUX 8 x 16 Input / Output Node
January 5, 2024
IMPORTANT SAFETY RECALL INFORMATION NHTSA RECALL 23E‐084
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Weldon, a division of Akron Brass Company, has decided a safety related defect exists in certain V‐MUX 8 x 16 I/O Nodes, Weldon Part Number 6030‐2000‐00.
In the affected products, short circuit protection may not function properly. In the case of a short circuit in the wiring or the connected load, overheating of the wiring or the connected device may occur, and depending on how the product is installed in the vehicle, this could increase the risk of a vehicle fire.
You are receiving this notice because your vehicle manufacturer records indicate you have received a vehicle that contains an affected unit or units. Vehicles equipped with these devices need a firmware update.
All the affected nodes installed in your vehicle can be updated with one connection to the V‐MUX network, without accessing the individual nodes. The design files and functionality are not affected. A Weldon service app and the downloader kit is utilized to make the firmware update. This update is estimated to take 5 minutes and can be completed when the vehicle is in PM without other changes.
Weldon will provide the update application to fleet owners and authorized service centers to install the firmware update along with instructions.
Please contact Weldon Customer Service fsg‐[email protected] and reference this recall number and provide your agency name and mailing address to obtain the remedy at no cost to you.
Please note that it is a violation of Federal Law to deliver a new motor vehicle or any item of motor vehicle equipment which is subject to a recall until the remedy has been performed.
If you believe there is a failure to remedy this defect without charge to the end user/owner of the vehicle and within a reasonable period of time, you may submit a written complaint to the Administrator, NHTSA, 1200 New Jersey Ave, SE, Washington, DC 20590, or call the Vehicle Safety Hotline 1‐888‐327‐4336 (TTY: 1‐800‐424‐9153) or go to http://www.safercar.gov.
Thanks for your prompt attention to this matter and continued support of Weldon.
Customer Care PH. 800.228.1161
Chronology :
This was not provided to us by Weldon.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| SPENCER | PUMPER | 2020 |
3 Associated Documents
Defect Notice 573 Report
RCLRPT-24V126-9666.PDF 237.161KB
Recall Acknowledgement
RCAK-24V126-4714.pdf 645.516KB
Owner Notification Letter(Part 577)
RCONL-24V126-7805.pdf 122.27KB
Latest Recalls Documents
For the Latest and Most recent Recall Information Visit the link below…
- 【Meet Different Needs】 The 12V round voltmeter comes with a panel and a nylon nut, which can be mounted separately on the 29mm diameter mounting hole or fixed on the matching panel, so that it could meet your different mounting needs.
- 【Blue LED Display】 This 12V battery meter with blue LED light, can be widely used under DC 12V 24V. With the digital voltage meter, you can easily monitor the voltage status of your car battery in real times, especially in dark environments.
- 【Waterproof & Useful】 The marine voltmeter gauge is waterproof design, so this LED voltmeter is safe to use even in moist environments. And also the mini
voltmeter is fit for 12V 24V cars, automotive, motorcycles, RVs, SUV, Off-road, ATV, boats, marine, ships, trucks, tractor, etc. - 【Measuring Range】 The rating of this battery voltage monitor is DC 8-48V, and its accuracy is 0.1V. With the precise 3-digit LED digital voltmeter, you can better monitor of the car's battery voltage status, helping to extend battery life.
- 【Easy installation】 This 12 volt battery monitor comes with a set of wires, two mounting screws, a matching panel and a nylon nut, making it easy to install and use.
- Real-Time DC Battery Monitor: This LED digital voltmeter gives you a precise, constant readout (8V-48V) of your battery’s voltage, letting you spot issues before a dead battery leaves you stranded, accuracy 0.1- 0.2V, only display voltage will not show power
- Clear Blue LED for Day & Night: Bright blue LED digits ensure easy reading under the sun or at night, with 0.1V accuracy for reliable monitoring of your 12V/24V system
- LED Digital Display: This Panel Mounting Voltage Meter with an led digital display to help monitor the on-board battery level and also makes it easy to ensure that you are not using more than the system can produce while working, thus avoiding draining the battery
- Waterproof for Vehicles & Boats: Rugged and sealed designed battery voltage monitor, making this 12V battery meter works everywhere—from daily cars and trucks to boats, RVs, and motorcycles. It’s built to handle rain, splash, and off-road conditions
- Easy 29mm Panel Mount Kit: Install in minutes - Everything is included for a clean mount in a standard 29mm dashboard hole or on the provided panel
- Buyer's Note: Our car voltage meter cigarette lighter size is 2.80*1.57*1.17 in, voltage: 12V, current: 0.1A, input voltage: 0-30V, output voltage: 0-5.5V. Please check the product parameters carefully to see if they are applicable before placing an order
- Bright Display: Car voltmeter is equipped with a high-contrast LED display, the digital display is clear, even in direct sunlight during the day or dark night, you can see the voltage value at a glance, to provide you with a handy reading experience
- Accurate Control: Voltage meter 12v can monitor the vehicle battery voltage in real time, reading accuracy up to 1 decimal place, so that you always pay attention to the vehicle power status, to avoid battery loss, short circuit and other safety hazards
- Excellent Quality: The case of the car voltage meter is made of ABS, which is durable and unbreakable. The handle has many neatly arranged small bumps, which prevents it from slipping easily during use and provides you with a long time of use
- Plug & Play: No need for cumbersome wiring or modification, just easily plug voltmeter for car into the cigarette lighter socket and instantly start your vehicle power monitoring journey, which can be easily managed by novice drivers
- 【Flexible Mounting Options】 This 12V round digital voltmeter includes a mounting panel and a nylon nut, supporting both independent installation on a 1.1IN diameter mounting hole and fixed installation with the matching panel, fully satisfying your various installation demands
- 【Blue LED Digital Readout】 Built with a bright blue LED display, this 12V battery voltage meter works perfectly with DC 12V and 24V power systems. It allows you to check your vehicle battery’s real-time voltage status easily and clearly, even in low-light or dark environments
- 【Waterproof & Wide Application】 Designed with a waterproof structure, this LED voltmeter gauge ensures safe and stable use in damp or wet conditions. It is widely compatible with 12V 24V vehicles, such as cars, motorcycles, RVs, SUVs, off-road vehicles, ATVs, boats, marine vessels, trucks and tractors
- 【Wide Measuring Range & High Accuracy】 This battery voltage monitor supports a wide voltage range of DC 8-48V with 0.1V high precision. The 3-digit clear LED display helps you monitor battery voltage accurately in real time, effectively protecting the battery and prolonging its service life
- 【Hassle‑Free Installation】 The 12 volt battery monitor comes complete with a full set of installation accessories, including wires, two mounting screws, a dedicated panel and a nylon nut, making the whole installation process simple, fast and ready for immediate use
- Useful Features: Effectively monitoring your car's battery level, this volt meter ensures that you are not using more power than the system's generating capacity, preventing battery drain and helping to prolong battery usage time, making it an ideal tool for maintaining your vehicle's electrical system
- LED Display: Featuring a precise 3-digit LED digital display with a range of 5-48V and an accuracy of 0.1V, this voltage meter can be read clearly in a variety of lighting conditions and is suitable for use on a wide range of vehicles and equipment
- Safe and Reliable: Made of high quality ABS material, durable and waterproof, this battery voltage meter is suitable for wet environments. Copper wiring and a built-in fuse provide overheat, overcurrent, overvoltage, overload, and short circuit protection to ensure safe use
- Easy Installation: Complete with 1 surface mounting plate, 1 round nut, 2 screws, 2 insulated terminals, and 1 23.8-inch connecting cable with a red wire for positive power and a black wire for negative power for quick wiring, this car voltage meter ensures easy installation
- Widely Used: Suitable for 12V and 24V DC systems, this digital voltmeter is widely compatible with cars, motorcycles, RVs, SUVs, crossovers, ATVs, UTVs, boats, trucks, tractors, and many other vehicles, ensuring stable operation in various environments
Last update on 2026-05-26 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-126
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Spencer Manufacturing, Inc. FEB 21, 2024 NHTSA Recall No. : 24V-126 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Spencer Manufacturing, Inc.
Address : 165 Veterans Blvd
South Haven MI 49090 Company phone : 269-637-8721
Population :
Number of potentially involved : 8
Estimated percentage with defect : 100 %
Vehicle Information : Vehicle 1 : 2020-2020 Spencer Pumper
Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : Weldon notified Spencer of the recall on 11/27/23, however, the correct person was not notified. It was not until NHTSA reached out regarding this recall that we began to dive into this. Unfortunately, we had some issues getting logged into our account due to an issue with login.gov. This has now been resolved and we are filing our recall information. There were a total of eight vehicles that were affected by this recall. Seven out of the eight were to one customer so it made the notification process fairly easy. Weldon notified all of our affected customers with owner’s letters on 1/24/24. We have not received any complaints or warranty claims from our customers.
Production Dates : DEC 19, 2019 – NOV 30, 2020
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : Describe the defect or noncompliance:
The short circuit protection may not function properly. In the case of a short circuit in the wiring or the connected load, overheating of the wiring or the load may occur, and depending on how the product is installed in the vehicle.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : This could increase the risk of a vehicle fire.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR Part 573 Safety Recall Report 24V-126 Page 2 Involved Components : Component Name 1 : V-MUX 8 x 16 Input / Output Node Component Description : Node
Component Part Number : 6030-2000-00 Supplier Identification : Component Manufacturer
Name : Weldon
Address : 607 NW 27th Avenue
Ocala Florida 34475 Country : United States Chronology :
This was not provided to us by Weldon. Description of Remedy :
Description of Remedy Program : All the affected nodes installed can be updated with one connection to the
V-MUX network, without accessing the individual nodes. The design files and functionality are not affected. A Weldon service app and the downloader kit is utilized to make the firmware update. This update is estimated to take 5 minutes and can be completed when the vehicle is in PM without other changes. Weldon will provide the update application to fleet owners and authorized service centers to install the firmware update along with instructions. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : An update to the firmware eliminates the defect. Once the defect was discovered, Weldon addressed the issue in production. Recall Schedule : Description of Recall Schedule : All affected customers have already been notified. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-126
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573 Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR
* NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.





