April 6, 2020 NHTSA CAMPAIGN NUMBER: 20V199000
Driver not Warned when ABS Offline/FMVSS 121, 136
If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.
NHTSA Campaign Number: 20V199
Manufacturer PACCAR
Incorporated
Components SERVICE BRAKES, AIR, ELECTRONIC STABILITY CONTROL
Potential Number of Units Affected 455,458
Summary
PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, “Air Brake Systems,” and 136, “Electronic Stability Control System on Heavy Vehicles.”
Remedy
PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR’s number for this recall is 20pbc AND 20KWB.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
IMPORTANT SAFETY RECALL
Interim Notification
June 4, 2020
| Subject: | Safety Recall 18PBB / 20PBC – Tractor ABS Lamp Issue NHTSA Recall numbers – 18V368 / 20V199 This notice applies to your vehicle. Your VIN(s) can be found on the bottom or back of this page. |
Dear Peterbilt Customer,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Peterbilt Motors Company has decided that certain Model Year 2008 through 2019 Model 330, 335, 337, 340, 348, 365, 367, 384, 386, 389, 520, 567, 579, and 587 vehicles manufactured from January 10, 2007 through March 01, 2018 fail to conform to Federal Motor Vehicle Safety Standard (FMVSS) No. 121 – Air brake systems and 136 – Electronic Stability Control Systems on Heavy Vehicles.
The Tractor ABS lamp may not illuminate when the vehicle experiences a loss of battery and/or ignition power to the ABS controller. Unknowingly operating a vehicle with an inoperative ABS system could lead to an increased risk of a crash or injury.
If you own multiple vehicles, your vehicles could be on either recall number. Your Peterbilt dealer will advise the applicable recall number for each vehicle after the software update becomes available.
| The problem is … | The Tractor ABS Lamp may not illuminate when vehicle experiences a loss of battery and/or ignition power to the ABS controller. |
| What your dealer will do … | Dealers will update the vehicle software when the update becomes available. |
| What you must do … | When you are notified the software update is available, contact your Peterbilt Dealer to schedule an appointment for repair. |
Peterbilt has initiated a recall to update the vehicle software. A software update is not yet available to correct this condition. However, Peterbilt is required to notify customers of the existence of the identified noncompliance. You will be notified by mail when the software becomes available.
If you require further information about this recall, reimbursement of a pre-notification remedy associated with this recall or experience any difficulty in making arrangements for this repair, please contact: Peterbilt Motors Company, 1700 Woodbrook St, Denton, TX 76205, Attn: Customer Services Department, phone 940-591-4220.
If you conclude that Peterbilt Motors Company has not enabled you to remedy this noncompliance in reasonable time and without charge, you may submit a complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, S.E., Washington, DC 20590, or call the toll free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
Federal regulation requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. If you no longer own this vehicle, we would appreciate you advising us of the new owner’s name.
We apologize for any inconvenience this preventive procedure may cause and thank you for your participation in helping Peterbilt provide the highest levels of customer satisfaction and service expertise.
We value your business and appreciate your ongoing loyalty to Peterbilt and its dealer network. Industry-leading quality, performance and reliability are hallmarks of Peterbilt products, and we thank you for making Peterbilt your truck of choice.
Sincerely,
Michelle Ponsonby
Director of Customer Service
Peterbilt Motors Company
258 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| KENWORTH | T170 | 2008-2020 |
| KENWORTH | T270 | 2008-2020 |
| KENWORTH | T370 | 2008-2020 |
| KENWORTH | T660 | 2008-2019 |
| KENWORTH | T680 | 2011-2020 |
| KENWORTH | T800 | 2008-2020 |
| KENWORTH | T880 | 2011-2020 |
| KENWORTH | W900 | 2008-2020 |
| PETERBILT | 330 | 2008-2019 |
| PETERBILT | 335 | 2008-2011 |
| PETERBILT | 337 | 2008-2019 |
| PETERBILT | 340 | 2008-2011 |
| PETERBILT | 348 | 2008-2019 |
| PETERBILT | 365 | 2008-2019 |
| PETERBILT | 367 | 2008-2019 |
| PETERBILT | 384 | 2008-2019 |
| PETERBILT | 386 | 2008-2019 |
| PETERBILT | 387 | 2008-2016 |
| PETERBILT | 388 | 2008-2019 |
| PETERBILT | 389 | 2008-2019 |
| PETERBILT | 567 | 2008-2019 |
| PETERBILT | 579 | 2008-2019 |
| PETERBILT | 587 | 2008-2019 |
8 Associated Documents
Non-Compliance Notice 573 Report
RCLRPT-20V199-5012.PDF 215.717KB
Interim Owner Notification Letter(Part 577)
RIONL-20V199-1255.pdf 150.123KB
Interim Owner Notification Letter(Part 577)
RIONL-20V199-1676.pdf 163.117KB
Recall Acknowledgement
RCAK-20V199-1777.pdf 245.252KB
Manufacturer Notices(to Dealers,etc)
ISSUED Owner Notification Letter(Part 577)
RCONL-20V199-9569.pdf 180.082KB
Recall 573 Report- Amendment 1
RCLRPT-20V199-9975.PDF 215.718KB
Remedy Instructions and TSB
RCRIT-20V199-6136.pdf 262.175KB
Latest Recalls Documents
Heavy Duty Truck Reprogramming
Description:
Designed for flexibility, the USB-Link 3 Wired Edition connects to your PC, tablet, or smartphone with a USB cable, allowing techs to directly connect to a device when working in the field or during signal interruptions.
Built to support the latest protocols (CAN FD, DoIP) and compatible with a wide range of OEM diagnostics software, the USB-Link 3 is our most advanced VCI to date, with the performance and technology you can rely on well into the future.
The USB-Link™ 3 comes with the following:
- Latching USB Cable (PN 404032)
- 9-Pin Deutsch Adapter, 1 Meter (PN 493128)
- J1962 Adapter (16-Pin OBD II, 1 Meter (PN 491113)
The USB-Link™ 3: Wireless is also available (PN 121052).
Specifications
Vehicle Network Protocol Support
CAN FD / J1939 FD / ISO15765 FD - 250K, 500K, 1M b/s with auto baud detection
Single wire CAN (SWCAN)
ISO 11898-3 Fault Tolerant CAN (FTCAN)
Diagnostics Over Internet Protocol (DoIP)
J1708
J1850 VPW (Class 2)
ISO PWM (SCP)
ISO 9141 / KWP2000 (ISO 14230) K/L line
ALDL 9600 and 8192 baud
ATEC 160 baud
Windows® Vehicle Communication API
Windows® Vehicle Communication API
RP1210 a/b/c
J2534 (2004 draft)
J2534-1 partial implementation (commercial vehicle focused)
Operating System Compatibility
iOS
Android™
Windows® 10, 11
Interfaces to Computing Platforms
USB 2.0 (vehicle-to-PC connectivity)
Bluetooth® 2.1 + EDR
Wi-Fi (dual band)
Compatible Software
Detroit Diesel Diagnostic Link
CAT Electronic Technician (On-Highway only)
Cummins Insite
International - ServiceMAXX Fleet Pro
Hino eXplorer
Volvo PTT
VCAD Elite Mack/Volvo
V-MAC Service Tools
Allison DOC® For PC-Service Tool - Protocols Supported: J1939, J1708/J1587, and J1850
Allison DOC® For Fleets (1000/2000) - Protocols Supported: J1939, J1850
Allison DOC® For Fleets (3000/4000) - Protocols Supported: J1939, J1708/J1587
Eaton ServiceRanger
Bendix ACom
WABCO Toolbox
Freightliner ServiceLink
International ABS
International DLB
International Intune
International IPC v2.02
PACCAR DAVIE4
Daimler Truck
DiagnosticLink Order Site:
DiagnosticLink Direct Link:
https://diagnosticlink.nexiq.com/DTNA/Default.aspx
- 🔥🔥🔥2026 New Functions Making X7HD the Top Dog - Big Surprise!!! ANCEL X7HD truck scanner 10 major functional advantages .✅>Full HDOBD/OBD2 Function ✅>ALL System Diagnostic ✅>42+ Reset Function ✅>Active Test / Bi-Directional Control✅>ECU Coding✅>Graphing Live Data✅>Wide Compatibility ✅>2 Yrs Free Update✅>Remote Operation✅>Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: ✅>6000 mAh✅>10.1 inch Tablet✅>2G RAM✅>32G ROM (Expandable to 128GB)✅>Data Record & Replay & Print✅>Android 10.0✅>Bluetooth 5.0 & Wifi✅>14 Languages
- 🚛OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7HD diesel scanner diagnostic tool not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions
- 🚛Advanced ECU Coding & Programming - ANCEL X7HD 10.1inch truck scanner diagnostic tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility
- 🚛42+ Reset Functions & Bidirectional Control - 2026 newest top heavy duty truck scan tool, comes with 42+ special services (ECU, Speed Limit and Idle Reset, Oil Reset, Injector Coding, EPB, ABS, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance
- 🚛10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7HD diesel truck scan tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc
- Dealer-Level Diagnostics, Faster & Easier: The heavy duty truck scanner delivers full-system diagnostics for engine, ABS, transmission, and more, plus 7+ reset functions like DPF Regen and Speed Limit Adjust. Powered by a 1.3G CPU, 2GB RAM, 16GB storage, Android 8.1, and a 3000mAh battery, it runs smoothly for fast scanning, live data, reports, Auto VIN, Wi-Fi updates, and easy handheld use. It captures screenshots, replays live data, and generates reports to support your repair decisions.
- Diesel Truck DPF Regen & Reset Features: Experiencing loss of power, sluggish acceleration, or poor hill-climbing performance? These symptoms are often caused by a clogged or overloaded DPF. The truck diagnostic scanner offers OEM-level forced DPF regeneration, DPF reset, and DPD/DPR functions. This device extends DPF lifespan and efficiently diagnoses exhaust aftertreatment issues. It can significantly reduce diagnostic time and save you up to $3,000 or more in costly dealership fees.
- 7+ Resets - Perform Essential Procedures: The truck scanner features 7+ essential resets including DPF Regen clears carbon buildup; Oil Reset clears service light; Injector Coding matches new injectors; DEF Test checks urea injection; Speed Limit Adjust saves fuel; Cylinder Cutout pinpoints misfires; Clutch Relearn restores smooth engagement. Reset after maintenance or part replacement for proper truck operation. Vehicle compatibility varies. Email [email protected] to confirm before buying.
- One Tool for 50+ Truck Brands: The diesel scanner supports J1939, J1708, J1587, and OBD2/CAN protocols, delivering broad coverage for major diesel trucks and commercial vehicles including Cummins, Cat, Detroit, Paccar, Volvo, Freightliner, Kenworth, Peterbilt, International, Mack, Isuzu, Hino, Scania, Mercedes-Benz, and more. Also supports Allison, Aisin, Eaton, WABCO, and Bendix, helping you diagnose more vehicles, reduce equipment costs, and handle more jobs with one professional scan tool.
- Full System Diagnostic for Truck: The truck scanner diagnostic tool covers all systems like engine, ABS, transmission, SAS, SRS, TPMS and more. It reads fault codes and shows real-time data. Additionally, it includes full HD OBD and OBD2 modes: read/clear codes, live data stream, I/M readiness, freeze frame, DTC lookup, and more. When warning lights appear or performance issues arise, quickly identify which system is affected and gain the real-time data needed for accurate diagnosis.
- Diagnose Heavy-Duty Truck Problems Fast — Read and clear fault codes and diagnose warning light issues on many Class 4–8 diesel trucks including Freightliner, Peterbilt, Kenworth, Volvo, Mack and Cummins-powered vehicles
- Help Reduce Downtime & Repair Costs — It offers full system diagnostics for major trucks meeting standard protocols, along with complete OBD2 functionality. Quickly check engine faults, view live truck data and identify issues before expensive repair shop visits or unnecessary repairs
- No complicated setup required — Simple menus and built-in DTC explanations make this truck code reader easy to use for owner-operators, mobile mechanics and small fleet maintenance
- Live Data & Built-in DTC Lookup — View real-time engine data and built-in truck fault code definitions directly on the scanner to help understand vehicle problems faster without searching through manuals
- Free Lifetime Updates & Technical Support — Includes free software updates plus responsive technical support for setup, compatibility and everyday truck diagnostics
- 【Built for Heavy Duty Diesel Diagnostics】Designed for SAE J1939 and J1708 compliant trucks, buses, and diesel-powered commercial vehicles. HD601 truck scanner diagnostic tool helps owner-operators, small fleets, mobile technicians, and independent repair shops quickly identify fault codes, view live data, and make informed repair decisions—saving time, reducing downtime, and avoiding unnecessary shop visits
- 【Full System Diagnostics+All HD OBD Modes】The New HD601 heavy duty truck scanner delivers full-system diagnostics on SAE J1939 and J1708-compliant commercial vehicles—digging into engine, transmission, ABS, fuel, every system that keeps your rig rolling. It supports all HD OBD modes, giving you live data, freeze frame, ECU info, vehicle info, emissions data tracking, plus code reading and clearing. Not just what broke, but why—so you fix it right the first time. Pinpoint issues faster, cut repair costs, and spend less time on the shoulder
- 【Wide Heavy-Duty Vehicle Coverage】Supports a wide range of heavy-duty vehicle manufacturers and systems, including Freightliner, Kenworth, Peterbilt, Volvo, International, Detroit, Cummins, Paccar, Allison, Eaton, Bendix, Wabco, and more. Coverage varies by vehicle make, model, year, and system configuration. Contact our support team before purchase if compatibility verification is needed
- 【Speaks Major Truck Protocol】The New HD601 diesel truck scanner is built for American-made trucks—and supports the heavy‑duty protocols you' re most likely to run into on the road: SAE J1939, J1708/J1587, ISO 15765‑4, ISO 14230‑4, ISO 9141‑2, J1850 PWM/VPW, ISO 27145‑4, and EURO‑6. For most trucks, model years, and systems, it speaks the language your vehicle understands. Just plug it in and start diagnosing—no guesswork, no gatekeeping. Note: vehicle functions and module availability may vary by manufacturer and model year
- 【Save Hundreds on Diagnostic Fees】Why pay $150–300 for someone to read your codes? With the New ANCEL heavy duty truck scanner, you can pull fault codes yourself—in minutes, without leaving the truck. One or two uses pays for the tool. After that, every diagnostic is money back in your pocket. Smart investment for owner-operators, techs, and small fleets. Read and clear stored fault codes in minutes. Active fault codes may require repairs before they can be cleared
- 2026 LAUNCH 1st Advanced Scan Tool Compatible With 12V&24V Vehicles:Design for Passenger&Commercial Vehicles 2 in1,work for Cars/Trucks/buses/trailers/excavators/diesel engine/pick-up/etc.
- J2534 Protocols with Smartlink C:Advanced OEM J2534 code ,Helps access direct data online, replace existing software/firmware in ECU,code new ECUs and fix software-controlled issue.
- Over 60 Service Reset Functions + Bi-Directional + ECU Code:This scan tool can support ECU Code,60+ reset service functions like SAS/EPB/TPMS/DPF/Oil/Brake/ABS Bleed, Injector coding, etc.
- Advanced Hardware & All Systems Diagnosis+Topology Display:Support All systems Diagnostic including ENG, AT, ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS, Fuel System, Light System and more.
- Wider Vehicle Coverage of 12V & 24V Vehicles + 24 Languages: LAUNCH X431 PRO3S+SMARTLINK HD automotive scanner is ALL-IN-ONE Scan Tool for 12V cars and 24V Heavy-duty trucks support CANFD & DOIP.
- 【WIRELESS DIESEL DIAGNOSTICS FROM YOUR PHONE】Turn your smartphone into a portable heavy-duty truck scanner in seconds. The ANCEL HD100 lets you read and clear fault codes, monitor live data, check engine health, and perform diesel diagnostics directly through the ANCEL Trucker App. Simply plug into the 9-pin or 16-pin port, pair via Bluetooth, and diagnose your truck from the cab, roadside, fleet yard, or repair shop—without carrying bulky diagnostic equipment
- 【RUN DPF REGEN WITHOUT DEALER STOPS】Handle common DPF issues before they turn into costly downtime. The HD100 supports DPF regeneration, DPF reset, and soot-related diagnostics on compatible Cummins and Caterpillar engines. Follow guided app instructions directly from your phone to start the procedure, monitor regeneration status in real time, and help reduce unnecessary service visits. NOTE: Not compatible with pickup trucks
- 【COMPACT BLUETOOTH TRUCK SCANNER FOR DAILY USE】Designed for drivers who want fast diesel diagnostics without bulky equipment or extra cables. The pocket-size HD100 quickly connects to iPhone and Android devices, allowing you to check warning lights, engine faults, ABS status, transmission systems, and other supported modules. Keep it in your cab or toolbox for quick roadside diagnostics, preventive maintenance, and everyday truck health checks
- 【FULL-SYSTEM DIAGNOSTICS FOR MAJOR DIESEL TRUCKS】Access engine, ABS, transmission, and other supported systems on Freightliner, Kenworth, Peterbilt, Volvo, Mack, International, and more. Read and clear fault codes, view live data, and monitor real-time system information across major diesel engines and components, including Cummins, Caterpillar, Detroit, Allison, Bendix, Eaton, and Wabco. Supports SAE J1939 and J1708 protocols
- 【NO SUBSCRIPTION FEES & LIFETIME FREE UPDATES】The ANCEL Trucker App provides fast Bluetooth pairing, DTC Lookup, live data viewing, and diagnostic reporting with no subscription fees, activation charges, or recurring costs. Rugged lock-ring connectors help maintain stable communication on vibration-prone diesel trucks, while lifetime free updates continue improving compatibility, functionality, and long-term value for owner-operators, drivers, and fleet maintenance teams
Last update on 2026-05-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.