August 17, 2021 NHTSA CAMPAIGN NUMBER: 21V643000
Rear LED Lights Too Bright/FMVSS 108
The excessive brightness may affect the vision of other drivers, increasing the risk of a crash.
NHTSA Campaign Number: 21V643
Manufacturer Swab Wagon Company, Inc.
Components EXTERIOR LIGHTING
Potential Number of Units Affected 4
Summary
Swab Wagon Company, Inc. (Swab Wagon) is recalling certain 2017 Chevrolet
2500 HD, 2018-2019 Chevrolet
3500 HD, and 2019 Ford
F-350 Swab Pioneer medic vehicles equipped with Code 3
7×9 Stop-Tail-Turn Reverse All-in-One LED lights. The lights may be too bright, exceeding the maximum light output allowed which may adversely affect the vision of drivers. As such, these lamps fail to comply with the requirements of the Federal Motor Vehicle Safety Standard (FMVSS) number 108, “Lamps, Reflective Devices, and Associated Equipment.”
Remedy
Swab Wagon will provide instructions on how to obtain a filter kit from the light manufacturer, free of charge. Owner notification letters were mailed on August 26, 2021. Owners may contact Swab Wagon’s customer service at 1-800-834-7922.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
August 26, 2021
NOTICE OF VEHICLE SAFETY RECALL #21V–643
Customer:
Contact:
Contact Phone#:
SWAB Dealer: Factory Direct
Body Model: SWAB Pioneer Model ALSF-96
Body Serial Number: ALSF-96-6815-4-19
Chassis: 2019 Chevrolet
3500 Crew Cab
Chassis VIN: 1GB4KW
Description:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Swab Wagon Company, Inc. was notified by the National Highway Traffic Safety Administration (NHTSi\) on August 16th 2021, that we had purchased and installed lighting equipment fT01n ECCO Holdings Corp. (Code 3
), that was later determined. to be noncompliant with Standard No. 108 of the Federal Motor Vehicle Safety Standard (FMVSS). The lights are the combination LED stop/tail/turn/back-up lights, Code 3
model #79STTRBZ, The lamps exceed the maximum permissible candela levels specified in the FMVSS standard. The excessive brightness may affect the vision of other drivers, increasing the risk of a crash.
According to our records, a pair of these lights were installed on the back of the above described vehicle. Should you no longer be in possessio11 of this Swab Pioneer body, please contact us with the updated ownership information.
Remedy:
Owners of the affected vehicle are to contact Code 3
Technical Support at (314)-996-2800 and request a filter kit, Part No. CZ0199. The kit will be provided to you free of charge. Owners are to install the filter kits on the lights as soon as they are received. If Code 3
is unable to perform this procedure without charge, 01· within a reasonable amount of time, you may also co11tact the Administrator, Natio11al Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888- 327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
Thank you for your cooperation in this matter. Please call us as 1-800-834-7922 should you have any questions or concerns.
Sincerely,
Stuart A. Margerum,
President
4 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| SWAB WAGON | CHEVROLET | 2017 |
| SWAB WAGON | CHEVROLET | 2018-2019 |
| SWAB WAGON | FORD | 2019 |
8 Associated Documents
Recall Quarterly Report #1, 2021-3
RCLQRT-21V643-4800.PDF 211.128KB
Recall 573 Report- Amendment 1
RCLRPT-21V643-2746.PDF 215.446KB
Recall Acknowledgement
Owner Notification Letter(Part 577)
RCONL-21V643-5339.pdf 2679.464KB
Recall 573 Report – Amendment 3
RCLRPT-21V643-7131.PDF 215.84KB
Recall 573 Report – Amendment 2
RCLRPT-21V643-8207.PDF 215.743KB
Recall 573 Report
RCLRPT-21V643-3135.PDF 213.697KB
Manufacturer Reimbursement Plan
RMRP-21V643-5592.pdf 393.857KB
Latest Recalls Documents
- 1)Adaptation: Tail light compatible with 2003 2004 2005 2006 Silverado 1500 2500 3500 HD. Please check our photos and ensure that the displayed parts look the same as the model you need
- 2)Excellent Quality: Our tail lights are made of excellent quality materials, reliable and long-lasting, even in bad weather conditions to bring you a safe and comfortable driving experience
- 3)Replacement Part Number: GM2800174, GM2801174, GM277-B100L, GM277-B100R, 19169004, 19169005
- 4)Improved Visibility: Our tail lights are brighter and clearer. This not only improves the visibility of the vehicle, but also improves the visibility of other drivers, which improves overall safety on the road
- 5)Easy Installation: Tail lights are easy and convenient to install, plug and play, saving both time and effort. If you have no installation experience, professional installation is recommended for best results
- Non-polarity. Can be used for brake lights, tail lights, stop lights, parking light, daytime running light, etc. Some sensitive vehicles will meet canbus issue after installing, load resistors or flasher relay will be required to solve these issues, you can contact us through Amazon Buyer Message to get help and solutions
- Low power and high brightness. 5.5W per 7443 led red bulb. Only 1/4 energy consumption of original 7443 red bulb, yet several times brighter. Built in smart IC driver ensure constant current, no radio interference. Plus instant-on capability with zero warm-up time
- Unique imitated halogen shape design. Resembling halogen bulb shape design and sequencing 54 pieces 4014-SMD LED chips precisely around the light. Delivering 360° high luminous efficiency with full amber light, easier to be noticed and safer to drive
- Small size comparable to OEM 7440 bulbs Non-polarity, applied to US standard and CK sockets. Fits: 992, 7440, 7441, 7443, 7442, 7444, W21W, WY21W, 7440NA, 7440NAK, 7444NA,7444NAK, 7443LL.etc. Amazon filter system may not be 100% accurate or up to date, if you are not sure which bulb model fit your vehicle, please check your vehicle owner manual to confirm or ask a question for help
- Electroplating process housing. Improves oxidation resistance and produces less heat. High-end styling, matching great in the assembly. Ideal replacement for your halogen 7440 red bulbs
- Lights Dim Over Time, Replace In Pairs: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind.
- Easy To Replace: Sylvania Long Life miniature bulbs are easy to install and show instant results.
- Low Maintenance And High Durability: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting.
- Longer Life Than Most Standard Bulbs: Long Life bulbs perform twice as long as any other standard miniature bulbs.
- The Sylvania Standard Of Quality: With over 100 years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket.
- [Fit For] - 03-06 Chevy Silverado 1500 / 2500 / 3500; [NOT Fit For] - 03 Silverado 3500 HD & Stepside Beds Models
- [DOT & SAE] - Meets or exceeds all U.S. & Canadian safety standards
- [Easy Install] - Direct OEM replacement, no modification required
- [New Aftermarket Set] - Includes BOTH driver (left) & passenger (right) sides
- [Quality Assurance] - Made in Taiwan with premium materials & strict QC standards
- Key Specs: Voltage DC 12V-24V, 625nm Brilliant Red, Wattage 3w, low power consumption and fast heat dissipation for longer lifespan. The 3157 led light bulbs are compatible with 3056 3156 3157 3157K 3057R 4057 4157 etc.
- High Quality: iFunyLed 3157 led lights use high quality LED chips and circuit boards, built-in intelligent IC driver, hardly delaying or flickering, bulb life up to 50,000 hours.
- Wide applicability: iFunyLED 3157 Red LED bulb can be used as a brake light, tail light, etc. If the bulb flashes or does not light up, it is necessary to add a load resistor to replace the relay and solve this problem.
- 300% Brighter: Our 3157 bulb has 54 pieces of 3014 led chips on it, 360 degree lighting angle, no blind spot.
- Professional Service: Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
Last update on 2026-06-13 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
Swab General Recall Reimbursement Plan Page 1
General Recall Reimbursement Plan
Pursuant to 49 C.F.R. Parts 573 and 577, Swab Wagon Company (“Swab”) provides information pertaining to its general plan to reimburse owners and purchasers for costs incurred to obtain repairs before they are notified of a related safety recall.
Reimbursement Notification
Swab’s letter to owners of vehicles subject to a recall will state whether Swab is offering a refund. An owner will be eligible for reimbursement if it paid to have the defect or noncompliance remedied prior to a specified ending date. In accordance with Part 573.13(c)(2)(i), the ending date shall be ten calendar days after the date on which Swab mailed the last of its Part 577 notifications to owners in the United States, unless a specific reimbursement plan is made available for a particular recall. Swab has option of specifying a beginning date for reimbursement eligibility. Under the regulations, an owner who paid to remedy the defect or noncompliance prior to the identified beginning date would not be eligible for reimbursement. Swab generally has not established such a beginning date for reimbursement eligibility. However, in any case where Swab determines that a beginning date is appropriate, Swab will indicate that date in the specific reimbursement plan for that particular recall. Subject to approval by the National Highway Traffic Safety Administration (“NHTSA”), information about reimbursement need not be provided in instances where all covered vehicles are under warranty.
Costs to be Reimbursed
For vehicles, reimbursement will not be less than the lesser of:
1. The amount paid by the owner for the remedy that specifically addressed and was reasonably necessary to correct the defect or noncompliance that is the subject of the recall; or
2. The costs of the part(s) for the remedy (to be no more than the manufacturer’s list retail price for authorized part(s), plus associated labor at local labor rates, miscellaneous fees (such as disposal of waste), and taxes.
For replacement equipment, reimbursement will be the amount paid by the owner for each replacement item (limited to the amount of the retail list price of each defective or noncompliant item that was replaced, plus taxes, where the brand or model purchased by the owner was different than the brand or model that was subject to the recall). If the item of motor vehicle equipment was repaired, the reimbursement provisions identified above for vehicles will apply.
Swab General Recall Reimbursement Plan Page 2
Repair costs incurred by the owner within the period during which Swab’s original or extended warranty would have provided for a free repair of the defect or noncompliance are not eligible for reimbursement, except in limited circumstances as outlined in 49 C.F.R. Part 573.13.(d).
Entities Authorized to Provide Reimbursement
Swab will continue to use authorized dealers to reimburse owners under this general plan for reimbursement, unless a specific reimbursement plan is made available for a particular recall. The owner will be directed to submit to an authorized dealer the required documentation, upon which reimbursement eligibility will be determined.
Required Documentation
Swab Customer Service will instruct the owner to submit documentation necessary to Swab’s determination of reimbursement eligibility. The following information is required:
1. Claimant’s name and mailing address.
2. For motor vehicles, the body model number, production date, and Swab serial number (located on the body i.d. tag), chassis make, model, model year, and vehicle identification number (or “VIN”).
3. For replacement equipment, a description of such equipment.
4. Identification of the recall number (either Swab’s or NHTSA’s recall number).
5. Identification of the owner of the recalled vehicle at the time that the pre-notification remedy was obtained.
6. An original receipt for the pre-notification remedy that includes a breakdown of the amount for parts, labor, other costs and taxes, including costs for the replacement item. Where the receipt covers work other than to address the recall or noncompliance, Swab may require the claimant to separately identify costs that are eligible for reimbursement.
7. If the remedy was obtained during the warranty period, documentation indicating that the warranty was not honored or that the warranty repair did not correct the problem related to the recall.
Failure to submit all of the above information may result in denial of the reimbursement request.
SEOCONTENT-END
This product presentation was made with AAWP plugin.





