Incorrect GAWR on Certification Label – 2021-2022 Heartland North Trail Trailers

March 29, 2022 NHTSA CAMPAIGN NUMBER: 22V199000

Incorrect GAWR on Certification Label/Part 567

An overloaded vehicle can increase the risk of a crash.

 

NHTSA Campaign Number: 22V199

Manufacturer HeartlandeBay logo Recreational Vehicles, LLC

Components EQUIPMENT

Potential Number of Units Affected 26

 

Summary

HeartlandeBay logo Recreational Vehicles, LLC (HeartlandeBay logo) is recalling certain 2021-2022 North Trail trailers. The Gross Axle Weight Rating (GAWR) listed on the Federal Certification Label, is incorrect, which can allow the vehicle to be overloaded. As such, these vehicles fail to comply with the requirements of 49 CFR Part 567, “Certification.”

 

Remedy

Dealers will send replacement certification labels to owners, free of charge. Owner notification letters were mailed May 4, 2022. Owners may contact HeartlandeBay logo customer service at 1-877-262-8032.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


22v199 & 2022-148
V.I.N. TAG REPLACEMENT INSTRUCTIONS
99.01.66

The V.I.N. tag is broken into four sections. You will need to replace all four sections.

 

IMPORTANT: DO NOT APPLY NEW LABELS OVER THE EXISTING LABELS.

1. Locate sections 1, 2 and 4 on the driver’s side of your unit, typically just above the baggage door. Remove sections 1, 2 and 4 from your sidewall using a plastic scraping tool being careful not to scratch your unit. You may use isopropanol alcohol to assist with adhesion removal if needed.

2. Locate sections 1, 2 and 4 in the new set you received in the mail, remove from backer and carefully place on side wall in the order you removed them.

3. Locate section 3 in the door jamb closest to the hinge of the entrance door. Remove section 3 from your door jamb using a plastic scraping tool, being careful not to scratch your unit. You may use isopropanol alcohol to assist with adhesion removal.

4. Remove section 3 from the backer and place on the inside of the door jamb.

 


Chronology :

3/16 – engineering caught the discrepancy during a routine audit.

3/17-3/22 finalized scope

3/24 sent to the safety committee

 


2 Affected Products

Vehicle

MAKEMODELYEAR
HEARTLANDeBay logoNORTH TRAIL2021-2022

 


7 Associated Documents

Noncompliance Notice 573 Report

RCLRPT-22V199-6799.PDF 215.007KB

 


Recall Acknowledgement

RCAK-22V199-8103.pdf 645.644KB

 


Remedy Instructions and TSB

RCRIT-22V199-9491.pdf 1011.562KB

 


Recall Quarterly Report #1, 2022-2

RCLQRT-22V199-9520.PDF 211.14KB

 


Recall Quarterly Report #2, 2022-3

RCLQRT-22V199-8202.PDF 211.243KB

 


Recall Quarterly Report #3, 2022-4

RCLQRT-22V199-5981.PDF 211.329KB

 


Owner Notification Letter(Part 577)

RCONL-22V199-4790.pdf 163.231KB

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V199&docType=RCL

 


 

SaleBestseller No. 1
3.5k TK Trailer Axle - 3500 lb Idler 5 Lug - Dexter Compatible, 89" Hubface 74" Spring Center / 5x4.5 Bolt Pattern
  • 89" Hubface 74" Spring Center / 5x4.5 Bolt Pattern | Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
  • Internal Components: 3.5k (3500 lb Capacity) Bearing Kit, 3.5k TK Axle Hub - 5 lug Brake, 3.5k TK Axle Beam - 3.5k Tube, 3.5k TK Axle Studs - 1/2"
  • How to Measure Your Idler Trailer Axle - Hubface: Measure from one face of hub (where the studs start coming out of hub) to the face of hub on opposite side. Spring Center: Measure from center of one spring seat, to the center of spring seat on opposite side (see image in gallery for more details).
  • High Strength Straight Steel Axle Tube Construction - Ensures even tire wear and a better highway experience | Underslung - Axle is welded with spring seats on the bottom. Allows for lower ride height. For optimal usage, use with double eye springs. | EZ Lube Design - Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
  • Replaces DextereBay logo, AL-KO, HayeseBay logo, and LipperteBay logo Axles. Design for use on Light Duty Trailers: Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Motorcycle, BBQ Pit, Cargo, Enclosed, RV & More
Bestseller No. 2
RV MURTS Trailer Axle Kit 3500 lbs, 73" Hubface - 58" Spring Center, Leaf Spring Tandem Suspension, U Bolt, Hanger, Shackle for Boat Trailer, RV
  • Compatibility. Trailer axle kit for 3,500lb cargo trailer, 73" hubface - 58" spring center(reference from P2), impressive support to wheels and shock absorbent for RV campereBay logo, pack with spring, U-bolt, hanger and shackle kit for replacement.1
  • Trailer Axle Parts Oulet. Maximum distance between spring center is 18'', between hubface is 14'', 5 bolt on 4.5 pattern trailer hub, replace the axle with prominent steel-made, provide better support to thefor 3500 lbs cargo trailer.
  • Trailer Leaf Spring. Confirm the measurement for sure fit, eye to eye length: 25-1/4 inch; free open: 3 inch; width of leaf: 1-3/4 inch; 4 leaves; 9/16 inch bushing dia, OEM reference: SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184.
  • Includes. Tandem trailer leaf spring kit included compatible 4 U-bolts feature 5-1/2'' long, 1/2'' dia, 2 tie plates and 8 hex nuts, 4 hangers, 4pcs 3-1/8" shackle straps and necessary locknuts and shackle bolts for one package easy replacement.
  • Durability. Trailer axle springs constructed with prominent steel with anti-corrosion coating, DOT qualified hardware and accessories improve the suspension system for long time and long distance journey in years.
SaleBestseller No. 3
3.5k TK Trailer Axle - 3500 lb Idler 5 Lug - Dexter Compatible, 73" Hubface 58" Spring Center / 5x4.5 Bolt Pattern
  • 73" Hubface 58" Spring Center / 5x4.5 Bolt Pattern | Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
  • Internal Components: 3.5k (3500 lb Capacity) Bearing Kit, 3.5k TK Axle Hub - 5 lug Brake, 3.5k TK Axle Beam - 3.5k Tube, 3.5k TK Axle Studs - 1/2"
  • How to Measure Your Idler Trailer Axle - Hubface: Measure from one face of hub (where the studs start coming out of hub) to the face of hub on opposite side. Spring Center: Measure from center of one spring seat, to the center of spring seat on opposite side (see image in gallery for more details).
  • High Strength Straight Steel Axle Tube Construction - Ensures even tire wear and a better highway experience | Underslung - Axle is welded with spring seats on the bottom. Allows for lower ride height. For optimal usage, use with double eye springs. | EZ Lube Design - Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
  • Replaces DextereBay logo, AL-KO, HayeseBay logo, and LipperteBay logo Axles. Design for use on Light Duty Trailers: Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Motorcycle, BBQ Pit, Cargo, Enclosed, RV & More
Bestseller No. 4
dreamdragon 3500 lbs Trailer Axle with 5-Lug 4.5'' Hubs - 73" Hubface 58" Spring Center
SaleBestseller No. 5
3.5k TK Trailer Axle - 3500 lb Idler 5 Lug - Dexter Compatible, 85" Hubface 70" Spring Center / 5x4.5 Bolt Pattern
  • 85" Hubface 70" Spring Center / 5x4.5 Bolt Pattern | Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
  • Internal Components: 3.5k (3500 lb Capacity) Bearing Kit, 3.5k TK Axle Hub - 5 lug Brake, 3.5k TK Axle Beam - 3.5k Tube, 3.5k TK Axle Studs - 1/2"
  • How to Measure Your Idler Trailer Axle - Hubface: Measure from one face of hub (where the studs start coming out of hub) to the face of hub on opposite side. Spring Center: Measure from center of one spring seat, to the center of spring seat on opposite side (see image in gallery for more details).
  • High Strength Straight Steel Axle Tube Construction - Ensures even tire wear and a better highway experience | Underslung - Axle is welded with spring seats on the bottom. Allows for lower ride height. For optimal usage, use with double eye springs. | EZ Lube Design - Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
  • Replaces DextereBay logo, AL-KO, HayeseBay logo, and LipperteBay logo Axles. Design for use on Light Duty Trailers: Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Motorcycle, BBQ Pit, Cargo, Enclosed, RV & More

Last update on 2026-05-23 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...